Show Off and Discuss Your Red Sea Reefer Series

[SurfTrack]

@SurfTrack Make sure it’s not sitting on the pipe bulkheads in the back at the overflow. You can damage the tank. You need to have the tank supported off the ground on sides.

Grats on getting it started.

Thank you. I’ve been told this. I have it sitting on a thick blanket. Do you think that is okay?

 

[DS204]

Thank you. I’ve been told this. I have it sitting on a thick blanket. Do you think that is okay?

Realize you weren't asking me, but that thick movers blanket looks pretty good. I used a yoga mat from walmart that was a half inch thick, if that idea helps. It worked great, but the bulkheads left permanent depressions in the sponge of the yoga mat from sitting there a week or two.

 

[SurfTrack]

Realize you weren't asking me, but that thick movers blanket looks pretty good. I used a yoga mat from walmart that was a half inch thick, if that idea helps. It worked great, but the bulkheads left permanent depressions in the sponge of the yoga mat from sitting there a week or two.

Thank you for that quick response. It will only be like that for a couple days at max.

 

[Salt_for_Brains]

hello! just wanted to introduce myself and my reefer 250.
Im Shaggy and ive been in the hobby off and on for awhile.
Im still waiting for another Radion XR15 pro, MP10, and battery back up to get in.
but with out further adue heres my reefer

 

[New&no clue]

Hi, I just got my 350 this week, what are people using for covers? I accidentally order the wrong size for the DIY screen cover, so I’m contemplating return for the right size, or if there is a different direct I should go. I would appreciate any opinions

 

[stacksoner]

Thanks for your message. I've done all this already.

Where should the water level be in the overflow box?

Right below the emergency drain pipe opening.

 

[Flameback Pair]

hello! just wanted to introduce myself and my reefer 250.
Im Shaggy and ive been in the hobby off and on for awhile.
Im still waiting for another Radion XR15 pro, MP10, and battery back up to get in.
but with out further adue heres my reefer

Just a note on the GFCI in the first picture. When that thing trips it turns off and stays off. When the power comes back on the GFCI does not reset. What ever is plugged into it after the power comes back on will stay off until you push the reset button.

 

[Salt_for_Brains]

Just a note on the GFCI in the first picture. When that thing trips it turns off and stays off. When the power comes back on the GFCI does not reset. What ever is plugged into it after the power comes back on will stay off until you push the reset button.

thanks for the heads up, i might just remove it and plug my DJ strip right into the wall, the cheap cabinet is right infront of the plug

 

[Salt_for_Brains]

Hi, I just got my 350 this week, what are people using for covers? I accidentally order the wrong size for the DIY screen cover, so I’m contemplating return for the right size, or if there is a different direct I should go. I would appreciate any opinions

theres a few posts about a company that makes lids for the reefers. i stopped reading the thread after page 180ish.

 

[Flameback Pair]

thanks for the heads up, i might just remove it and plug my DJ strip right into the wall, the cheap cabinet is right infront of the plug

You want a surge suppressor not a surge protector. Surge protectors shut off and stay off. Surge suppressors stay on during an electrical surge. This video explains it however not all suppressors come with a BBU and since you are getting an Ecotech BBU you wouldn't need a suppressor with a battery.

 

[Salt_for_Brains]

You want a surge suppressor not a surge protector. Surge protectors shut off and stay off. Surge suppressors stay on during an electrical surge. This video explains it however not all suppressors come with a BBU and since you are getting an Ecotech BBU you wouldn't need a suppressor with a battery.

Might have to get one down the road, wife is already mad at me for going WAY over budget. speaking of BBU i have two now and i dont know if i want to run both MP10s or one and the return pump... any suggestions?

 

[Flameback Pair]

Might have to get one down the road, wife is already mad at me for going WAY over budget. speaking of BBU i have two now and i dont know if i want to run both MP10s or one and the return pump... any suggestions?

I wouldn't have a return pump on a battery they draw a lot of power and would suck your batteries down fast.

 

[AZMSGT]

I wouldn't have a return pump on a battery they draw a lot of power and would suck your batteries down fast.

Ecotech return pumps are made to run off their Battery Back up system. Essentially the pump runs at about 10-15% power when it goes into battery mode. It’s not designed to go full blast, but it keeps things moving and hopfully your tank alive in an emergency. This limp mode also prolongs the battery life.

 

[Waynerock]

Just upgraded the 170 to a 250. Best tanks ever!

 

[Salt_for_Brains]

I wouldn't have a return pump on a battery they draw a lot of power and would suck your batteries down fast.

Ecotech return pumps are made to run off their Battery Back up system. Essentially the pump runs at about 10-15% power when it goes into battery mode. It’s not designed to go full blast, but it keeps things moving and hopfully your tank alive in an emergency. This limp mode also prolongs the battery life.

I ended up just hooking up both BBU together and running both MP10s as i didnt get the booster cable.


Shes filled up and running!!!
12 hours later and shes all filled and waiting for me to add Dr. Tims one and done tomorrow. then waiting 4 months before i add any fish!!
Return pump driver went nuts and had to reset it and do a factory reset, still not trusting it 100%. its not hooked up to my reeflink, just running it a 100% through the driver.
ill post a video as soon as my pc loads it

 

[AZMSGT]

I ended up just hooking up both BBU together and running both MP10s as i didnt get the booster cable.


Shes filled up and running!!!
12 hours later and shes all filled and waiting for me to add Dr. Tims one and done tomorrow. then waiting 4 months before i add any fish!!
Return pump driver went nuts and had to reset it and do a factory reset, still not trusting it 100%. its not hooked up to my reeflink, just running it a 100% through the driver.
ill post a video as soon as my pc loads it

No need to wait 4 months for fish. If your thinking the 4 month cycle means no fish that’s not accurate from my research. You can add fish at the 2-2.5 mark for the 4 month cycle, as long as your parameters are correct. Just coral typically can’t go in till around 4 mo. The main reason 4 months is used because you’re looking for Coraline algae and it takes about 4 mo it to get going. Also you need to seed some Coraline post initial cycle or it may not show up for much longer.

Fwiw, I’m doing the 4m cycle too so I read and watched the videos over and over. Also asked tons of questions.

Good luck with your system, looking good.

 

[Salt_for_Brains]

No need to wait 4 months for fish. If your thinking the 4 month cycle means no fish that’s not accurate from my research. You can add fish at the 2-2.5 mark for the 4 month cycle, as long as your parameters are correct. Just coral typically can’t go in till around 4 mo. The main reason 4 months is used because you’re looking for Coraline algae and it takes about 4 mo it to get going. Also you need to seed some Coraline post initial cycle or it may not show up for much longer.

Fwiw, I’m doing the 4m cycle too so I read and watched the videos over and over. Also asked tons of questions.

Good luck with your system, looking good.

You are 100% correct, I just want to do it that way, once i turn my lights on i can have a tang in there taking care of the algae. i guess its a personal preference

 

[AZMSGT]

@Salt_for_Brains just a suggestion and that’s all it is. Might I say, you should start your own build thread. This thread is so huge that your posts and updates on your tank will just get buried in the future. Would love to watch your system grow..

 

[Salt_for_Brains]

@Salt_for_Brains just a suggestion and that’s all it is. Might I say, you should start your own build thread. This thread is so huge that your posts and updates on your tank will just get buried in the future. Would love to watch your system grow..

I know it was, and thank you for it!
i have a build thread going. somewhere lol

 

[pelphrey]