Show Off and Discuss Your Red Sea Reefer Series

[drawman]

Here's the Clarisea SK-3000 in my Reefer 250 v3 sump. My build thread has a walk through on how to mod the sump to fit the Clarisea in. Works perfectly.

I really like that internal cabinet you made. I'm not sure I could house all of my cords in it but that's a really good idea.

 

[pelphrey]

 

[Txplicit]

This is my Reefer 170 with an Artfully Acrylic top. I love how clean and low profile it is. Definitely worth the money. I also use a LeRusso Kessil mount for my A360 from California Reef Co. I mounted it to the back of the cabinet so I didn't have to cut the overflow lid. I'm also running Marine Pure Spheres in the return section of my sump. Dumped in the 2 quart box.

Curiously, your afs, did you just double side tape that to your overflow cover?

1. Does it clear the clearview acrylic lid to drop food?

2. Any issues with it wobbling or falling over if the double side tape isn't strong enough or weakened by salt creep?

 

[tbare89]

Does anyone know where to get a spare slider for the filter sock holder? I bought a used RSR 450 that didn't come with my setup and the trickle noise is the online audible noise on my setup right now.

 

[AZMSGT]

Does anyone know where to get a spare slider for the filter sock holder? I bought a used RSR 450 that didn't come with my setup and the trickle noise is the online audible noise on my setup right now.

I've ordered parts several times from these guys. Fast and fair pricing. Not sure if yours takes a single or double so here are both.

Replacement Red Sea Reefer & Max-E Micron Filter Holder. Red Sea Part # 42190

Replacement Red Sea Reefer & Max-E Micron Filter Holder. Red Sea Part # 42190.

www.marineandreef.com

Red Sea Reefer XXL/Peninsula Aquarium Replacement Holder for 2 Micron Filter Bags 42318

Replacement Red Sea Reefer XXL/Peninsula Aquarium Holder for 2 Micron Filter Bags. Red Sea Part # 42318.

www.marineandreef.com

 

[tbare89]

You're the best. Just ordered.

 

[Marc88]

Does anyone know where to get a spare slider for the filter sock holder? I bought a used RSR 450 that didn't come with my setup and the trickle noise is the online audible noise on my setup right now.

I built an acrylic cover for the overflow that cuts the noise back quite a bit. It would cost you less than $5 and your time. Pretty easy to make.

 

[Krully]

Is there a way to grow chaeto without a reactor in the compartment before the skimmer? I’d like to have some kind of refugium but budget might be tight for a while and I don’t want to drill/add plumbing.

 

[pelphrey]

Is there a way to grow chaeto without a reactor in the compartment before the skimmer? I’d like to have some kind of refugium but budget might be tight for a while and I don’t want to drill/add plumbing.

Depends which version of the sump you have. This will fit version 1 -

Red Sea 250 Sump / Sump Baffle Kit /Black acrylic

Create your Refugium w two piece baffle kit, slides right in. Only need to attach w thumb screws provided. Fits as seen in picture below. if you need anything changed just contact us and we will be happy to help. **Additional charges may apply to custom designs or alteration requested** 1/4”...

bluetideacrylics.com

 

[Krully]

I have the version 3 on a Reefer 350 but I’ll look into something similar

 

[pelphrey]

 

[Flameback Pair]

Does anyone know the size of the emergency drain downpipe in the overflow box of the Reefer 250? I think I have version 1 or 2 but definitely not 3 if it matters. I know the size is metric in mm's.

 

[MattL87]

Recently setup a reefer 300 xl. Upgraded from a Nuvo 14g.

pretty basic setup, running two radion g4 pros with a white ati hybrid fixture.
Filtration is filter socks and refugium. No skimmer as of yet.

 

[Angel_Anthias lover]

Build Thread - My Red Sea Reefer Build thread

This tank was set up in April 2017 and never thought of making a build thread until now. It has a slight cyano issue which I'm working on but doesn't want to go away. It was second hand and so I don't know much about the equipment which came with it. It has a deltaec skimmer and a medic media...

www.reef2reef.com

Theres my thread if anyone is interested for my 350 mixed reef

 

[Flameback Pair]

@Angel_Anthias lover thanks for sharing your build thread.

 

[Flameback Pair]

Apex orange split wire loom to cover cordage and cables when routing. The smallest increment I could buy it in is 25 feet, more than I will need. If any of you want some let me know, just pay shipping, and it’s yours

 

[canadianeh]

Does anyone run skimmer in the refugium section (front section) on v3 Reefer 250 sump? I plan to use the skimmer (back section) for marine pure block and/or refugium. Will I have any issue in the long term?

Also, I only use gate valve on the return pipe to clarisea. Do I need one or is there benefit to have one on the return pump pipe?

Please check my build thread here:

Build Thread - New corals added - Welcome to my private island! Enjoy your stay :)

Hi all! I am new here but not new to reefing world. Actually, I am going to call myself a newbie since I am renewed into this hobby and I will need refresher for many part of this hobby. Yes it has been a while. :) I used to own a IM Nuvo 40 and this time I am going with Red Sea Reefer 250...

www.reef2reef.com

 

[Andre B.]

Does anyone run skimmer in the refugium section (front section) on v3 Reefer 250 sump? I plan to use the skimmer (back section) for marine pure block and/or refugium. Will I have any issue in the long term?

Also, I only use gate valve on the return pipe to clarisea. Do I need one or is there benefit to have one on the return pump pipe?

Please check my build thread here:

Build Thread - New corals added - Welcome to my private island! Enjoy your stay :)

Hi all! I am new here but not new to reefing world. Actually, I am going to call myself a newbie since I am renewed into this hobby and I will need refresher for many part of this hobby. Yes it has been a while. :) I used to own a IM Nuvo 40 and this time I am going with Red Sea Reefer 250...

www.reef2reef.com

You may have to raise your skimmer since the water level will not be adjustable in the front section.

 

[Eight]

You may have to raise your skimmer since the water level will not be adjustable in the front section.

Agreed. I wouldn't want to run the skimmer in this section due to water level fluxtuation. You really want your skimmer in the skimmer chamber.

 

[Eight]

Does anyone run skimmer in the refugium section (front section) on v3 Reefer 250 sump? I plan to use the skimmer (back section) for marine pure block and/or refugium. Will I have any issue in the long term?

Also, I only use gate valve on the return pipe to clarisea. Do I need one or is there benefit to have one on the return pump pipe?

Please check my build thread here:

Build Thread - New corals added - Welcome to my private island! Enjoy your stay :)

Hi all! I am new here but not new to reefing world. Actually, I am going to call myself a newbie since I am renewed into this hobby and I will need refresher for many part of this hobby. Yes it has been a while. :) I used to own a IM Nuvo 40 and this time I am going with Red Sea Reefer 250...

www.reef2reef.com

If you're using a variable speed return pump you don't need a gate valve on the return pump side.