##### Picture Entry: BC RAINDROP ON ROSES GROW-OUT CONTEST #####

[Chee-tomorpha]

Wondering if those that received theirs early on, how's the color coming along? I was part of the first shipments and mine is all brown.

I know it's a competition but wondering what, if anything, I can do. Or, it just needs more time. Strictly going off of polyp extensions it seems happy.

My tank has a high Mag, I just noticed that in today's testing and have stopped dosing until it comes down.

 

[Elise_]

And now he has one of the best sales of the year going on right now. Just saying if you want another box

I wish! I need a bigger tank. The 13.5 Evo probably won’t take a whole lot more

 

[L3leedingstar]

@lynn.reef.nerd
@Reefing102
@BranchingHammer

Official picture for October 2022

 

[Mattiejay6]

Wondering if those that received theirs early on, how's the color coming along? I was part of the first shipments and mine is all brown.

I know it's a competition but wondering what, if anything, I can do. Or, it just needs more time. Strictly going off of polyp extensions it seems happy.

My tank has a high Mag, I just noticed that in today's testing and have stopped dosing until it comes down.

View attachment 2879856

View attachment 2879857

Browned out can me too much light, or to high in phosphates in my experience

 

[SamMule]

Wondering if those that received theirs early on, how's the color coming along? I was part of the first shipments and mine is all brown.

I know it's a competition but wondering what, if anything, I can do. Or, it just needs more time. Strictly going off of polyp extensions it seems happy.

My tank has a high Mag, I just noticed that in today's testing and have stopped dosing until it comes down.

View attachment 2879856

View attachment 2879857

Staying pretty steady for me. Maybe paled out a bit from my whiter T5's, but it's looking great!

 

[Zaven D]

Mine didn’t seem to lose a lot of color still has the pinks going

 

[Chee-tomorpha]

Browned out can me too much light, or to high in phosphates in my experience

I have an AP700 13" above water level and set to 30% power.

Phosphate 0.02
Nitrates 2.0

Aside from browning it seems to be encrusting further.

 

[Chee-tomorpha]

Staying pretty steady for me. Maybe paled out a bit from my whiter T5's, but it's looking great!
View attachment 2880015

Mine has lost the green around the base like yours.

 

[Chee-tomorpha]

Mine didn’t seem to lose a lot of color still has the pinks going

That looks awesome!

 

[Mattiejay6]

Mine has lost the green around the base like yours.

Just needs time to acclimate to your tank. Do you dose any trace?

 

[Chee-tomorpha]

Is it possible my Mag plays a role? My tests today showed it being super high. I've turned off dosing any further until it comes back down.

 

[Chee-tomorpha]

Just needs time to acclimate to your tank. Do you dose any trace?

I use Red Sea AB+ and Colors program. AB+ is dosed daily where as the colors program is only two times a week. I don't test trace so keeping it low I hope won't harm anything.

 

[am3gross]

Mine is starting to get the green base back. It too is starting to encrust. My lighting is Ecotech Gen 5 set to 80%, which should be getting 250-300 par where it is sitting.

ALK: 7.8-8.0
CAL: 426
MAG: 1500
PO4: .05
NO3: 25
Salinity: 1.024

 

[Chee-tomorpha]

Mine is starting to get the green base back. It too is starting to encrust. My lighting is Ecotech Gen 5 set to 80%, which should be getting 250-300 par where it is sitting.

ALK: 7.8-8.0
CAL: 426
MAG: 1500
PO4: .05
NO3: 25
Salinity: 1.024

I'll increase my nitrate amount to get it back up a little faster, just don't want to make too many changes too quickly.

 

[Mattiejay6]

Is it possible my Mag plays a role? My tests today showed it being super high. I've turned off dosing any further until it comes back down.

You should make a post in the SPS section so we don’t derail this thread

 

[IslandLifeReef]

I have an AP700 13" above water level and set to 30% power.

Phosphate 0.02
Nitrates 2.0

Aside from browning it seems to be encrusting further.

Do you have a lot of other SPS in the tank?

Light could be causing that problem, but at that height above the water and at a 30% setting, it would be too little light, not too much light. My best guess is that the frag is getting no more than 150 PAR based on PAR numbers from BRS tests on that light and the frag being just below the water surface. The further down, the lower the PAR. Now, this is just a guess. If you have a lot of other Acro's in the tank at the same level with great color, I would rule out light. However, Adam says that his corals get "blasted" with light, so I doubt you are providing too much light.

 

[Chee-tomorpha]

I have a few acro frags sitting relatively close to it. Their colors are not great either which provoked my inquiry.

I have had my light at 40% power and turned some of the acros white. However, from another thread troubleshooting my Maxima clam, it seems I have too low a nutrient level and may be the reason why my acros turned white vs the light being too high.

What are your thoughts on this? It would benefit the clam if I can increase the light output to reach the sand bed. It has currently found a spot it likes and I hate to move it again.

Would weekly light increase of 1-2% safe? And what would be a good target max?

 

[Elise_]

@lynn.reef.nerd I have to purchase a new ruler, I only have a tape measure at the moment which has chemicals on it I don't want near the tank.
I got the frag Thursday, is tomorrow/Sunday ok for my first 3 days? I did post a photo of the frag immediately after placing in the tank, just not sure if Sunday is too far out or it will be ok?

 

[Elise_]

Maybe mine will also color up a little more as it gets settled, but seems to have good polyp extension today.

 

[IslandLifeReef]

I have a few acro frags sitting relatively close to it. Their colors are not great either which provoked my inquiry.

I have had my light at 40% power and turned some of the acros white. However, from another thread troubleshooting my Maxima clam, it seems I have too low a nutrient level and may be the reason why my acros turned white vs the light being too high.

What are your thoughts on this? It would benefit the clam if I can increase the light output to reach the sand bed. It has currently found a spot it likes and I hate to move it again.

Would weekly light increase of 1-2% safe? And what would be a good target max?

If the light has an acclimation mode, you could use that to increase the light. The best option would be to find access to a PAR meter and figure out what setting you need to get the light over 250 PAR. Somewhere between 250-450 would definitely work. Then use the acclimation setting to increase the light over 30 days.