Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
GHL gave me the Mitras several years ago, so the following is some hot shill action.
So you have switched to all channels at 100% - from the AB+GHL gave me the Mitras several years ago, so the following is some hot shill action.
I had a Sky with two Gen 4 XR30s (the last great Radion) over my IM100, but I changed them out for one ReeFi Uno 2 and two Mitras 7206. The lights are 13" above the tank, and that's something you won't do with the G6 Radion without them filling the room with glare. The recessed diodes in reflectors of the Mitras and Uno greatly reduces any light spill in the room around the tank. I run my lights Sanjay style (all channels 100%) but I've created an AB+ for the Mitras. Just search "telegraham mitras ab+." You'll see it. These three lights combined give me the look I'm after, but check out ReefBum's peninsula for how well the lights with my AB+ grew corals for Keith.
Main differences...the Mitras give you mounting height flexibility without increasing glare. The spectrums are super similar. That's not a differentiator. The Mitras cost less without sacrificing build quality. The software is easy to navigate, but you'll need a PC to update firmware (for now). My Mitras are mounted to an RMS bar with 3D printed parts. Super easy.
I would not trade my Mitras for G6 Radions even if Ecotech gave them to me.
It's been about a month at all channels 100%, I abandoned AB+ long ago, have been slowly transitioning to more of a 14000k look, not because of the Uno 2 (why that question?), and mainly because of Sanjay. I slid up the Mitras sliders, it looked great, then I did the same to the Uno 2. Both lights are well-balanced at 100%.So you have switched to all channels at 100% - from the AB+
How long ago? Just because of the UNO?
"grew corals for Keith" - is he still using them or is that past tense?
I wasn’t sure if it was for better color blend or possibly a preference more toward the UNOs color rendering.(why that question?),
They're very similar, with the main difference being the Mitras' UV compared to the Uno 2's low violet. Regardless, they blend very well.I wasn’t sure if it was for better color blend or possibly a preference more toward the UNOs color rendering.
Thank you for the clarification.They're very similar, with the main difference being the Mitras' UV compared to the Uno 2's low violet. Regardless, they blend very well.
Would you mind articulating a bit more about the all channels 100% versus the AB+ spectrums? I am intrigued by this. Or is there a thread somewhere about this or an article by Sanjay?It's been about a month at all channels 100%, I abandoned AB+ long ago, have been slowly transitioning to more of a 14000k look, not because of the Uno 2 (why that question?), and mainly because of Sanjay. I slid up the Mitras sliders, it looked great, then I did the same to the Uno 2. Both lights are well-balanced at 100%.
Keith reset his tank, he's still using them, and he will soon grow corals again. All that's available on his YouTube channel.
No Sanjay thread or article of which I'm aware. I have no science to support what I'm doing, nor have I looked for any.Would you mind articulating a bit more about the all channels 100% versus the AB+ spectrums? I am intrigued by this. Or is there a thread somewhere about this or an article by Sanjay?
Interesting - I have been somewhat working away from the general AB+ look but have not progressed nearly that far. Would be interested in your actual light project compared to mine to see the average intensity difference overall.
The power at 70%. Are you referring to acclimation setting?100% is all channels at 100%. Power at 70%. No balancing.
No. Max Output Power.The power at 70%. Are you referring to acclimation setting?