Ordered! I'll have it tomorrow and hopefully have a photo up soon... can I just put my iPhone up to the eyepiece to take a photo of the slide?
Yep, that is all I did for my pics.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ordered! I'll have it tomorrow and hopefully have a photo up soon... can I just put my iPhone up to the eyepiece to take a photo of the slide?
Yep, that is all I did for my pics.
Had a Dino outbreak. Found the source had tons of detritus in sump. Cleaned it all out siphoned sand dosed vibrant once and it looks to be clearing up so far. Second tank I've had that vibrant did work with brown algae on sand and rocks . Just keep eye on n / p
Funny thing, the more po4 i dose, the lower it gets
I've found that when my nitrates get too low and I increase my KNO3 dosing my PO4 consumption goes up and visa versa! Dose one, I HAVE to dose the other!
I bet with the increase in PO4 dosing you'll see a need to bring NO3 dosing up too!I dose both, nitrates are going up and phosphate down. So im gonna go ahead and increase to po4 dose since my no3 is rising
ProbablyI bet with the increase in PO4 dosing you'll see a need to bring NO3 dosing up too!
Its not high, i just see an increase in no3 and decrease in po4.FWIW from my personal experience, if NO3 is HIGH, dosing PO4 will always bring down NO3. Also noticed that my NO3 is high my PO4 is really low, which, I'd consider 0 at times. Just my observation.
Probably
Its not high, i just see an increase in no3 and decrease in po4.
no3 is somewhere between 10 and 5 and po4 is 0.028 ppm Dosing 1 ppm no3 and 0.04 po4 daily. According to redfields ratio to dose both i need to up no3 0.5 ppm and po4 0.05 daily roughly.what's your NO3 and PO4 level?
I know, but i wanto dose it up to avoid chocking the systemIf you are battling Dino, I think you may need to be close to 10ppm NO3 and your PO4 needs to be 0.10ppm.
Yes, not much flow at all.
Had a Dino outbreak. Found the source had tons of detritus in sump. Cleaned it all out siphoned sand dosed vibrant once and it looks to be clearing up so far. Second tank I've had that vibrant did work with brown algae on sand and rocks . Just keep eye on n / p
Funny thing, the more po4 i dose, the lower it gets
I know, but i wanto dose it up to avoid chocking the system
I would not worry under the current circumstances......you have a system that has elevated nutrients, but depleted N and P.
Restoring P levels will not hurt anything, but it WILL get things growing again!
Most importantly though, you might get ZERO suppressive effects vs dino's until PO4 is consistently over 0.10 ppm.
For that reason, I would add 1 mL to your PO4 dose every time you come back to test and find levels at less than 0.10 ppm.
≥ 0.10 ppm is the short term goal. 5-10 ppm of NO3 seems like a good range to go with that PO4 level, but more would be OK – don't let NO3 bottom out either. You would very much like to see some cyano and green algae growing.
I'm leaning amphidinium at the moment. Got video?@taricha when you have a moment please help ID my strain of dino. I'm thinking prorocentrum? https://www.reef2reef.com/threads/d...ttling-altogether.293318/page-37#post-3988958