LOL, I posted in your build thread or PM'd you, I believe, that I was sorry and did the switch.;Facepalm;HilariousHeyI I switched to GHL too. Though I do still have my APEX running until I get the ion director.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
LOL, I posted in your build thread or PM'd you, I believe, that I was sorry and did the switch.;Facepalm;HilariousHeyI I switched to GHL too. Though I do still have my APEX running until I get the ion director.
Oh. I missed that. Did you mean you are sorry you switched to GHL?LOL, I posted in your build thread or PM'd you, I believe, that I was sorry and did the switch.;Facepalm;Hilarious
HECK NO!!! I am sorry that I possibly caused you to pause, and in such, being hypocritical myself when I said not to switch, when I did a few months after.Oh. I missed that. Did you mean you are sorry you switched to GHL?
Glad to hear. Read this thread, very informative, thanks for the info. Keep it coming.HECK NO!!! I am sorry that I possibly caused you to pause, and in such, being hypocritical myself when I said not to switch, when I did a few months after.
So far I love GHL!!!
That's the thing, this thread is not about trying to convince reefers to switch from Apex to GHL, or any other controller, it is simply to give a honest opinion of the difference between Apex and GHL. I will leave the rest to the reefers themselves. This is, actually, where my issue with @Bulk Reef Supply comes into play. I have always looked towards them as a honest way to compare different items of the same nature. I am not so sure that will happen now. Even if they are truly honest, can it be trusted as they are now merged with Neptune, when it comes to controllers and such?I will say you've turned me off Apex/Trident. I had one before and enjoyed it, cept for the reagents part. Didn't care for wasting half of it everytime it was time to change and the expense. However It still almost seems like you need to be good at coding and have alot of patience to get GHL setup and working perfectly. Think I'm going to go with Alkatronic/Mastertronic. Great info though!
Do you have a khd yet? If so how's it working for youHeyI I switched to GHL too. Though I do still have my APEX running until I get the ion director.
No I didn't take it like that. To try to convince me away from Apex, I was already looking at other options from previous experience as I said I hate the reagent system with Neptune. Expensive and waste half of them.That's the thing, this thread is not about trying to convince reefers to switch from Apex to GHL, or any other controller, it is simply to give a honest opinion of the difference between Apex and GHL. I will leave the rest to the reefers themselves. This is, actually, where my issue with @Bulk Reef Supply comes into play. I have always looked towards them as a honest way to compare different items of the same nature. I am not so sure that will happen now. Even if they are truly honest, can it be trusted as they are now merged with Neptune, when it comes to controllers and such?
Will it prevent me from buying the only items that BRS carries...NO...but will it prevent me from looking at their rating and comparison videos...GOOD CHANCE.
I will never talk bad about BRS as they have helped me and so many other reefers getting into this very hard hobby. That does not mean I will not try to talk against them to keep them on the honest and straight path.
I was hoping that @Bulk Reef Supply would give a honest and genuine comparison between Apex and GHL, as they have far more resources and man power to do it than someone like me. NOW, this comparison I am doing means more to mean, as I can say it will be honest on ALL fronts.
Again, that's the thing, GHL did approach me when they learned of my interest in converting. I said this before, AND, I will say this again to those that feel I am on GHL's payroll...LOL...I will give full disclosure, I am not. I wish I was as it would have saved me $3000+. The fact is GHL wants nothing more than to become better. That's the one thing GHL asked me when I started this thread. They asked me to be honest and let them know how to become better. That was enough for me to do the conversion. It happened in a day...BUT...them asking me to be honest was enough for me.No I didn't take it like that. To try to convince me away from Apex, I was already looking at other options from previous experience as I said I hate the reagent system with Neptune. Expensive and waste half of them.
But the info on the GHL is really good. I can see I personally don't like the interface or the patience needed to set all this up. The software it seems is very lacking, that was the primary appeal of Apex, kinda to me its the comparsion between Iphone/Android. Iphone super easy User Interface (Apex), and Android being more customizable but more difficult (GHL).
So I take the third option and go Alkatronic or Mastertronic lol. Either way its a standalone unit like The Ion Director or KH Director which I like cause most of my equipment already has some type of controller itself, so whats the point of the Apex itself besides the PH probe. Just a waste of $700. If the Trident/DOS was standalone I'd be more inclined.
Oh I planned on it, this has been a tough decision as they are all expensive, so its not like I can try one, not like it and then move on to a different one. And Unfortunetly there just isn't enough info on the Ion Director right now. So if I went GHL it would be to get the KH Director.Again, that's the thing, GHL did approach me when they learned of my interest in converting. I said this before, AND, I will say this again to those that feel I am on GHL's payroll...LOL...I will give full disclosure, I am not. I wish I was as it would have saved me $3000+. The fact is GHL wants nothing more than to become better. That's the one thing GHL asked me when I started this thread. They asked me to be honest and let them know how to become better. That was enough for me to do the conversion. It happened in a day...BUT...them asking me to be honest was enough for me.
That being said...If you decide to go with the Alkatronic and Mastertonic then I truly hope you get what you are looking for, but, please start a thread on it. I simply want honesty when comparing different items. That's all GHL wants as well, thus my pull to them.
As you have seen, I HOPE, I have no issue telling the truth. I pre-ordered the IOND but was late in the process. I have talked with @Ditto and he says the IOND is the REAL DEAL. I would wait until some GHL users get the IOND and start to post on it before I pulled the trigger on anything else. If I get mine then I will be in full post mode. The whole point of this thread was to help other reefers that don't have the funds, to decide which is best for them from the get go. I am doing this conversion thread, and I make deceit money by todays standard, and it is still strapping me financially, so I hope you and everyone will see what I am trying to do. I am loyal to several faults, one being, trying to help others when they are not capable of doing so themselves. I want to help other reefers when deciding to take the leap and buy a controller.Oh I planned on it, this has been a tough decision as they are all expensive, so its not like I can try one, not like it and then move on to a different one. And Unfortunetly there just isn't enough info on the Ion Director right now. So if I went GHL it would be to get the KH Director.
But Yea I'm also indecided between getting just the Alkatronic, or getting the Mastertronic. But I will definitely start a thread once I make the decision. Also need time to get the funds!
I had the KHD from the start of the conversion. Initially, I had some issues with the PH probe, but was able to work it out and since then, it has been working perfectly. I had to go thru several steps to get the KHD working properly, but it has worked flawlessly since. I haven't had the time to compare it to the Trident and Hanna checker yet, as I have been swamped with work, but I plan to when work starts to slow down.Do you have a khd yet? If so how's it working for you
Mine is going haywire for almost a year. Up and down up and down. Did uvjust replace the probenor did something else?I had the KHD from the start of the conversion. Initially, I had some issues with the PH probe, but was able to work it out and since then, it has been working perfectly. I had to go thru several steps to get the KHD working properly, but it has worked flawlessly since. I haven't had the time to compare it to the Trident and Hanna checker yet, as I have been swamped with work, but I plan to when work starts to slow down.
Sorry, but the control cabinet is not done yet. I just wanted you to see that I am using a KHD.
I do prefer the GHL design and I am curious how the two will fair side by side. The GHL probes are sensitive to turbulent water, like coming off a 90 directly into or out of the probe.I just ordered, what will be the first of many, flow sensors to plumb into my UV sterilizer. I do feel this is where GHL will stand out, when build quality and engineering comes into play. I have noticed that my Apex flow sensors are sensitive, to say the least, to cleaning the tank. They use a propeller that is prone to clogging up, getting dirty, and such. I notice that when I clean the tank the flow drops on my 3 Apex flow meters. I don't feel that the flow meters need to be cleaned every few months. When I install the GHL flow meter I will let you know and start the comparison.
I have found that the Apex probes are far more sensitive to air bubbles than the GHL probes. That’s not to be said that the GHL probes aren’t resistant to them, just not as sensitive.I do prefer the GHL design and I am curious how the two will fair side by side. The GHL probes are sensitive to turbulent water, like coming off a 90 directly into or out of the probe.
Are you referring to the KHD?Mine is going haywire for almost a year. Up and down up and down. Did uvjust replace the probenor did something else?