PeterZammetti
Active Member
Now for those of you who follow me on YouTube, you know I told you the mounting clear brackets for Finnex Marine 24/7 can be used on your salt water mixing pails. Unfortunately when I donated the light I had to give up the brackets so I used that good ole military untelligence and designed a new idea!
So coincidentally the hole for hanging (on the spackle) also works as a holder but I used the hard to find 7/16 bit to make another hole anyway. The smaller hole to go into the bucket is 5/16 and the nylon screws, well any size that cover the hole will work.
You can use a large wire cutter (I know wrong tool for the job) to cut the plastic then sand the edges round.
Now accidentally the second hole in the bucket from the old mounts comes in handy if you need to hang something so line the 2 holes up in the spackle so you can access the other hole when you turn the hose holder!
So coincidentally the hole for hanging (on the spackle) also works as a holder but I used the hard to find 7/16 bit to make another hole anyway. The smaller hole to go into the bucket is 5/16 and the nylon screws, well any size that cover the hole will work.
You can use a large wire cutter (I know wrong tool for the job) to cut the plastic then sand the edges round.
Now accidentally the second hole in the bucket from the old mounts comes in handy if you need to hang something so line the 2 holes up in the spackle so you can access the other hole when you turn the hose holder!
