The House of Orange

[Fish Styx]

hope to score a green slimer today..starting to add sps to tank. Got a small piece about 1 inch of good stuff the rest was dying from a person who was doing a tank tear down of green bird nest about 8 months ago. I now have 4 frags on 2x2 square flat frags tiles and they almost cover the entire base and are about max 1 1/2 inch tall with alot of branches. So I think the 300 is ready for some sps. at top of tank rock ledges..When I say some I mean a very selective, unique few. I been looking around. maybe rainbow slice..she wants reds and pinks and orange....anyone have ideas ???

Can't go wrong with Red planet (fast grower too), pinky the bear (blue with pink tips), and Princess Peach.

 

[Fish Styx]

We broke 100 pages! Closing in on 2k comments, too.

 

[tbrown]

Hopefully you had a mouth full of coffee when it happened.

Even if he did, it was mostly oat milk.

 

[Sean Clark]

Even if he did, it was mostly oat milk.

Is that a lot of milk? That's seams like a lot of milk.

 

[tbrown]

Is that a lot of milk? That's seams like a lot of milk.

When your coffee is about as black as a white man's belly in the middle of winter you might have a problem.

 

[rmorris_14]

Is that a lot of milk? That's seams like a lot of milk.

Not as much as usual

 

[rmorris_14]

I like hot coffee, black.. iced coffee, with some milk

 

[Sean Clark]

Not as much as usual

Part of that was for you

 

[rmorris_14]

Part of that was for you

I know that’s why I gave you a little winky wink

 

[crusso1993]

Get a room.

 

[Fish Styx]

Even if he did, it was mostly oat milk.

Sheesh. I don't put that much in my coffee. Just a splash.

 

[Sean Clark]

 

[tbrown]

Sheesh. I don't put that much in my coffee. Just a splash.

 

[Fish Styx]

Who has two thumbs and got absolutely nothing done today?

 

[Fish Styx]

Good Morning, Team Styx. I've been wrestling with code for the Apex. Though admittedly, I didn't get much of anything accomplished yesterday due to a series of "napcidents". Anyways, I cannot seem to get the BoB to recognize the magnetic sensors that I installed on the cabinet doors. I triple checked everything, and the wiring is done correctly. The switches themselves are single pole, single throw, and two sets are wired in series (one having three, and one having four), leaving one switch independent.

The independent switch is set to control the outlet under the fuge stand that the cabinet lighting is plugged into, and the code is as follows:

Set OFF
FALLBACK OFF
IF SW3 Open Then ON

Nothing. Nada. Zip. The outlet remains ON regardless of the contact sensor position. The same is true for the switches wired in series (one controlling the cabinet lighting for the DT, and the other controlling the intrusion detection alarm sequence. I am stumped.

The only thing that I can think of is that the BoB I am using may be faulty... I ordered it from a custom seller on Etsy. I'd rather not cut and rewire to a different BoB, so if any of you have any input, it would be appreciated.

 

[rmorris_14]

Get a room.

Good Morning, Team Styx. I've been wrestling with code for the Apex. Though admittedly, I didn't get much of anything accomplished yesterday due to a series of "napcidents". Anyways, I cannot seem to get the BoB to recognize the magnetic sensors that I installed on the cabinet doors. I triple checked everything, and the wiring is done correctly. The switches themselves are single pole, single throw, and two sets are wired in series (one having three, and one having four), leaving one switch independent.

The independent switch is set to control the outlet under the fuge stand that the cabinet lighting is plugged into, and the code is as follows:

Set OFF
FALLBACK OFF
IF SW3 Open Then ON

Nothing. Nada. Zip. The outlet remains ON regardless of the contact sensor position. The same is true for the switches wired in series (one controlling the cabinet lighting for the DT, and the other controlling the intrusion detection alarm sequence. I am stumped.

The only thing that I can think of is that the BoB I am using may be faulty... I ordered it from a custom seller on Etsy. I'd rather not cut and rewire to a different BoB, so if any of you have any input, it would be appreciated.

@Sean Clark -don’t you know codey stuff?

 

[Fish Styx]

Eureka!! Nevermind my last post, I figured out what was wrong. I had the outlet state set to "ON" instead of "AUTO". Hahahaha. Tragedy averted.

 

[rmorris_14]

Eureka!! Nevermind my last post, I figured out what was wrong. I had the outlet state set to "ON" instead of "AUTO". Hahahaha. Tragedy averted.

Well that was anticlimactic….

 

[Fish Styx]

Well that was anticlimactic….

 

[crusso1993]

@Sean Clark -don’t you know codey stuff?

I do not know why you quoted my “get a room” post in your last post about codey stuff. I suspect it’s because you really like me.

BTW - 2,000!