Elevated Tin (Sn) - But ONLY Tin... Likely source?

sgrosenb

Active Member
View Badges
Joined
Nov 19, 2009
Messages
487
Reaction score
302
Location
Naples, FL
Rating - 0%
0   0   0
Hey all - got my Triton ICP test back today and it shows elevated levels of tin (see link below - 8.48 micrograms/liter). Question is - if it's only showing increased levels of tin, and no other metals, then could it still be something rusting, or would other metals show elevated as well if rust was present? Just trying to narrow down my possible sources before I dig around the whole tank for culprits. My tank is about 10 months old, and I do have about 2 feet of vinyl PVC tubing (Item #203062 from bulkreefsupply.com)

Thanks in advance for any help. ICP results: https://www.triton-lab.de/en/showroom/aquarium/auswertung-b/icp-oes/91868/
 

X-37B

Fight The Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,679
Reaction score
16,824
Location
The Outer Limits
Rating - 0%
0   0   0
Do you have starfire glass?
There was a thread awhile ago where they stated if the starfire glass was reversed, on the inside instead of the outside they had high tin readings because tin is used in the coating on the starfire side.
I will see if I can fimd it.
 
OP
OP
S

sgrosenb

Active Member
View Badges
Joined
Nov 19, 2009
Messages
487
Reaction score
302
Location
Naples, FL
Rating - 0%
0   0   0
Do you have starfire glass?
There was a thread awhile ago where they stated if the starfire glass was reversed, on the inside instead of the outside they had high tin readings because tin is used in the coating on the starfire side.
I will see if I can fimd it.
Thanks 90s Reefer. I have a Red Sea Reefer 625xxl - not sure if that has Starfire glass?
 
OP
OP
S

sgrosenb

Active Member
View Badges
Joined
Nov 19, 2009
Messages
487
Reaction score
302
Location
Naples, FL
Rating - 0%
0   0   0
I havent found any rust yet... But before I start taking my tank apart, I'm wondering if I can rule out rust due to the fact that my ICP test only shows high tin - all other metals are 0. If rust would show other elevated metal readings besides just tin, I can rule out rust and look elsewhere, such as PVC or glass
 
Back
Top