Cabel nightmare

[klavmaister]

I will never be wise to this. why can't someone invent, for example, a power supply, to which you can connect all or more of Red Sea's products, do you have to have so many cables? Is there a good and safe solution? many of the products draw only a few watts, completely idiotic that they need their own power outlet.

 

[Screwgunner]

Get a bag of zip ties

 

[Solo McReefer]

Zip ties and those little zip tie 3m sticky holders

You mean that Red Sea controller pantry slide out doohicky doesn't work?

I was going to copy it

 

[gbroadbridge]

I will never be wise to this. why can't someone invent, for example, a power supply, to which you can connect all or more of Red Sea's products, do you have to have so many cables? Is there a good and safe solution? many of the products draw only a few watts, completely idiotic that they need their own power outlet.

Then you would have a single point of failure.

One power outlet or power supply fails and everything goes down with it.

 

[TangerineSpeedo]

Then you would have a single point of failure.

One power outlet or power supply fails and everything goes down with it.

Isn't just buying a Red Sea tank a single point of failure? JK...

 

[klavmaister]

Isn't just buying a Red Sea tank a single point of failure? JK...

So far norhing have faild me, except for a replacement fan for the rl90 lamps, waited for 8 months - complete caos between shop, wholesaler and red sea

 

[Solo McReefer]

He's making a joke

The stands for the large first generatiom Red Sea Reefer systems

Didn't have enough support on the front cross member

Causing the tank to bow downward

And the silicone seam would split on the front glass on some people's tanks, causing catastrophic disasters

From all evidence, they have fixed that issue with Gen 2 systems and stands(which look beefy now)

 

[klavmaister]

He's making a joke

The stands for the large first generatiom Red Sea Reefer systems

Didn't have enough support on the front cross member

Causing the tank to bow downward

And the silicone seam would split on the front glass on some people's tanks, causing catastrophic disasters

From all evidence, they have fixed that issue with Gen 2 systems and stands(which look beefy now)

Aaah hehe, Thx! Yes, this is a g2 250

 

[MoshJosh]

Not perfect but I been using zip-ties and zip-tie mounts to keep cords off the floor and keep excess cord wound up:

My set up:

 

[Gumbies R Us]

You can always use those black Velcro ties. We use those at our churches sound booth and they are easy to move around, and work just like a zip tie.
Amazon product