OP
OP
jayteerq
Active Member
Definitely crossed my mind but I couldn’t figure out how to mount them onto the primes
Are AI Primes sufficient enough for SPS?
- Thread starter jayteerq
- Start date
- Tagged users None
I do own a apogee par meter
The upper left shelf with the birdsnest is the highest mounting point it’s getting 325 par
I don’t keep a high scape. The torches are mid level and it’s 200-250 as you move horizontally at that level
The sandbed is 100-150
I run the fixture with these settings -
Red - 5
green - 5
Blue - 40
White - 10
Royal blue - 40
Violet/uv - 40
Ironic_Water
Community Member
dang, you're making me get the itch to spend needless money on this wallet-crushing hobby. Love how high you can mount it too and still get those levels... Might be my next type of light one day.
apb03
Well-Known Member
Ya they are 30s. I run everything at 100%, but honestly you don't need to run them nearly that high.
The lps I do have are in shaded areas, but I only keep lps where I can't place acros.
I never maxed it to 100 because this is more than sufficient but I have cranked it and can easily get 500+ on that top left shelf with the bonsai, with room to spare
This is their par map over a 48” tank
As an extra bonus with the photon, the light comes with both the tank mount legs (shown in my pic) and the hanging kit included in the price
OP
OP
jayteerq
Active Member
Wow that’s an insane deal. I’d definitely want to hang minesI never maxed it to 100 because this is more than sufficient but I have cranked it and can easily get 500+ on that top left shelf with the bonsai, with room to spare
This is their par map over a 48” tank
As an extra bonus with the photon, the light comes with both the tank mount legs (shown in my pic) and the hanging kit included in the price
OP
OP
jayteerq
Active Member
Your acan doesn’t mind being at 100+ PAR? I’ve read they only do well in 25-75 par. Not sure if that information is correct though lol I don’t own any Acans yet but would love to soonPhoton 48v2 on a 75g tank
Not true, but you do need to acclimate. I reduce the light 10-15% for a week, then bump back up slowly to current settings
Acans can do fine in 100 par.
My light is centered over the tank and I have the acans against the front glass which is a 100 par zone
Also depends on what they were raised on before you get them. These came from led lit tanks so they were used to led upon arrival
Last edited:
You won’t even need supplement light bars. This isn’t a point source light where everything comes from a puck with a fisheye lens. All your lighting comes from a matrix of leds, top down. So things are evenly lit, all the colors are blended well.
you don’t need to spend 2000$ to light a 75g tank. One photon can do it all. Look at my coral colors, everything is vibrant.
you don’t need to spend 2000$ to light a 75g tank. One photon can do it all. Look at my coral colors, everything is vibrant.
I know a lid guy, makes custom polycarbonate lids. My 75g is a standard aqueon - needed two lids to fit in the tank frame. $120 for the pair. No charge for customizations
Cut down on evaporation dramatically. Water builds up then drips back in the tank. Keeps salinity stable and makes top off less frequent
Clear Lid for Aqueon® Tanks All Sizes
Introducing Clear Lids for Aqueon® Tanks– Your Aquarium's Perfect Companion!Upgrade your aquarium setup with Clear Lids for Aqueon® Tanks, available in a variety of sizes including 10, 20L, 20H, 29, and 36 gallons bow front to suit your specific tank dimensions. Designed with both functionality...
walterlids.com
OP
OP
jayteerq
Active Member
Wow those are beautiful pictures. Can you share your settings? I think I’m going to purchase this light lolYou won’t even need supplement light bars. This isn’t a point source light where everything comes from a puck with a fisheye lens. All your lighting comes from a matrix of leds, top down. So things are evenly lit, all the colors are blended well.
you don’t need to spend 2000$ to light a 75g tank. One photon can do it all. Look at my coral colors, everything is vibrant.
See post 42
OP
OP
jayteerq
Active Member
Sweet gotcha thanks!
OP
OP
jayteerq
Active Member
Too much clutter lol
Would need 4 primes min
There are threads with people using 4 primes on a 75g and still needing to supplement with led bars to get proper par. And people saying you need 6 primes for a 75g.
Prime is great for small tanks but once you get into the larger and deeper tanks they are weak.
There are threads with people using 4 primes on a 75g and still needing to supplement with led bars to get proper par. And people saying you need 6 primes for a 75g.
Prime is great for small tanks but once you get into the larger and deeper tanks they are weak.
I had 2 on a 40g and it was an extreme challenge. Looking at your tank I’d say at least 5.
Similar threads
- Question
