600 GPD RODI Filters? Good or Bad?

[vadryn]

I just ordered a new 150 GPD RODI from BRS that's due to arrive today. My current 75 GDP takes 8 hours with a can at my kitchen sink to fill, so having this moved to the bathroom and taking half as long made me pull the trigger. A couple days later I see an ad for the ICP Analysis 600 GPD RODI selling for $350. Water change water ready in one hour?! Wishing I had seen this first. The easier a WC is, the more likely it is to happen consistently.

Anyone with experience on 600 GPD home use RODI? Drawbacks? I haven't got my BRS unit and am already considering a return. I doubt ICP Analysis "invented" or "engineered" this unit, but if they are putting their name on it I expect it does what it says it does. Thoughts?

 

[KrisReef]

The County of San Diego has an RO unit that is making 50 Million GPD, and its good enough to drink. I am not sure they use any DI filters but I think that would be my concern on a fast flowing unit. What is the RO producing before the water hits the DI?

Otherwise, get one and let us know if we don't find someone who replies to your question. GL.

Also, I have had so many floods with a slow RODI I would hesitate to buy the flood maker @600GPD!

 

[MarineandReef Jaron]

I can only give my experience with 1000 GPD and 1500 GPD RO units.

With these units the membranes are way better. We used to get 0 TDS out of the 1500 GPD membrane with a starting TDS of 700. The commercial membranes just work way better than the small hobby ones. Just make sure that your pressure is high enough. These membranes require good pressure to work and if you need to add a booster pump they are not the normally hobby-sized ones. The commercial ones are very expensive.

 

[vadryn]

The unit I was looking at says it has an auto shut off at 30 minutes. That would be useful. Right now I’m setting a timer for eight hours. I received my shipment. Now to decide if I send it back in order the high output unit?

 

[kindafun]

Very interesting, following along.

 

[vadryn]

I received my 600 GPD RODI and am ready to install. Quick notes - It doesn't come with a saddle valve you need to attach to existing under-cabinet plumbing. The instructions say to run waste water into the floor drain. Floor drains under kitchen or bathroom sinks aren't a thing where I live so I had to go buy one. (BRS RODI systems come with saddle valves)

Post install thoughts to come...

 

[vadryn]

Well that was fast... in a bad way. The included parts don't fit. Local plumbing store was full of dumb looks when I tried to get parts there. Super-frustrating fail at this stage.

 

[SlowAndStupid]

Following this. Could use it for my 1000 gallon tank if you find it works well.

 

[SlowAndStupid]

Any updates?

 

[SlowAndStupid]

Curious if you made progress with this?

 

[vadryn]

UPDATE- I ordered missing installation parts from BRS and then ICP-Analysis also realized their mistake and sent the right parts, also. I'm using the BRS parts because it has a valve control at the water source I wanted.

Initial thoughts - and then I'll post again after my WC tonight.

RODI comes with a built-in timer that shuts off the unit after 30 minutes (to keep the pump from overheating I was told) I have to unplug and plug in the unit to start it up again. Not loving that. Wish it had a power button to do that. It stays offline and I only turn it on for my WC.

I added a TDS meter before and after my DI chambers. On my first WC, the water after the RO was running 2 ppm and 0 after the DI.

The advertised 600 GPD seems either quite generous, or that is the RO and the DI throttles that back. I think I was getting closer to 300 GPD flow. I plan to time it tonight. My WC is 25 gallons, so that should be water in 1 hour, in theory. I'm honestly expecting 2 hours.

Hopefully I have good, useful news....

 

[SlowAndStupid]

Good luck!

 

[vadryn]

Finished WC - took 2.5 hours to get 25 gallons so 10 gph. Better than the. 3 gph I was getting but a long way from 25 and the addition of having to babysit and restart the unit every 30 min.

I feel like an early adopter that’s going to have to deal with undesirable quirks while they continue to sort out and refine. I could have saved $100, got 6 gph and not have to babysit…

 

[slingfox]

Th ask for the update and review!

 

[mcintosh]

UPDATE- I ordered missing installation parts from BRS and then ICP-Analysis also realized their mistake and sent the right parts, also. I'm using the BRS parts because it has a valve control at the water source I wanted.

Initial thoughts - and then I'll post again after my WC tonight.

RODI comes with a built-in timer that shuts off the unit after 30 minutes (to keep the pump from overheating I was told) I have to unplug and plug in the unit to start it up again. Not loving that. Wish it had a power button to do that. It stays offline and I only turn it on for my WC.

I added a TDS meter before and after my DI chambers. On my first WC, the water after the RO was running 2 ppm and 0 after the DI.

The advertised 600 GPD seems either quite generous, or that is the RO and the DI throttles that back. I think I was getting closer to 300 GPD flow. I plan to time it tonight. My WC is 25 gallons, so that should be water in 1 hour, in theory. I'm honestly expecting 2 hours.

Hopefully I have good, useful news....

Any chance you could show some photos of your setup? I cannot get water out of my unit and clearly I am missing something.