3d Printed Aquarium Parts Archive

[Karliefish]

Hello Everyone,

We are working on bringing back the "Master List" of 3D print files for the hobbyist and will be working on gathering links and data over the next few days. This will be a living document and things may change as we move along, but the intent is to provide a source for commonly used files for all our members to enjoy.

A couple of quick notes to get use started.

- If you have something you would like to include, please reply to this post or PM me and I will add it to the list. I can include your username if you would like in case anyone has any questions, etc.
- All included items will be for hobby/personal use only.
- If you have a commercial item you would like to include, you can contact revhtree to discuss options.
- If I post a link to an item and you own it and you do not want it included just PM me and I will remove it.
- I will try and categorize items to the best of my ability.
- This is for the community, so if you have any suggestions, please let me know.

I will try to keep up with this thread as new items become available.

Thanks everyone, looking forward to getting this going again.

Boost.

-------------------------------------------------------------------------------------------------

Maintenance Items​

• Mag Float Aquablade Attachment Mod by macdaddynick1
• Splash Shied Holder for Rimless Tank by macdaddynick1
• Nuvo 20 Filter Basket by Boostable
• Frozen Food Feeder Tube by SeeCoryRun
• Nori Feeder by Zephrant
• Filter Cup – RedSea by revnull
• Filter Cup – Waterbox by SenatorPOPS
• Nuvo – Media Basket by nitrografix
• Nori Feeder by RepRapTodd
• Algae scrapper for magfloat by Bksba
• Aquarium Vacuum attachment for Pump by Danceresort
• Blowbytobystart siphon (venturi effect) by Andrea Fontana
• EZbySnap Razor Blade Handle by AdanA
• MJ1200 Aquarium Vacuum by christhet
• Reef Mower by @Pickwun
• Vacuum Pump Attachment by @alexjoha

Equipment Mount Items​

• Temp Probe – DS18B20 Holder by uepsie
• Power Brick Mount by Torx1979
• MaxSpect Controller Mount by HarryPotterPrinter
• Aqamai Brain and Power Supply Holders by @Orbela
• Alkatronic Power Brick Wall Mount by @Sisterlimonpot
• Aqua Ultraviolet Mount (or any tube 2.5" diameter) by @philshel
• Aqua ilumination SOL Power Supply Holder by @rickcavanaugh
• CoralVue Varios4s Power Brick Mount by garbled
• Cobalt Air Pump Stand by icecool2 by 1
• Ecotech Vortech Pump Controller Mount by crispy01
• Ecosmart driver supports (controller mount) by Medina47
• Power Brick Mounts (Ecotech* and Jebao*) by Torx1979
• Ecotech Dual Vortech Controller Mount
• Ecotech M1 Vectra Power brick by@Sisterlimonpot
• Ecotech Radion XR15 Pro/MP10/MP40/VectraM1/M2 Quad Power Brick Holder
• Ecotech Radion XR30Pro Power Brick Holder by @rickcavanaugh
• Ecotech Radion XR30Pro Power Brick Holder by @alexjoha
• Ecotech Vectra Controller Mount by @ludnix
• XR15 power brick holder by @Skyfish
• Icecap 1k Gyre Power brick holder by @rickcavanaugh
• Replacement Bushing for Glamorca GP03 or Icecap 3K Gyre by devmsp
• Jebao Controller cradle by @fsamir
• Jebao DC9000 pump controller mount by niget2002
• Jebao RW controller cradle by vega77
• Jebao dc6000 controller cradle by vega77
• Jebao CPby40 Gyre controller bracket by AdriL
• Jebao/jecod controller hang on glass mount by @Krheigh
• Jebao Return Pump Controller Mount by tonea002
• Jebao Pump Controller Cradle (DC/DCT/DCP 50W) by @amps
• Kamoer X1 Pump by@Sisterlimonpot
• Kessil A360WE Power Brick Mount by @philshel
• MaxSpect Controller Cradle (250) by @TheHarold
• Maxspect gyre xf150 controller cradle by vega77
• Neptune COR20 Power brick mount by garbled
• Neptune CORby20 Power Supply Mounting Bracket by @Gotfrogs
• Orphek Atlantik Power Supply Mount by @ludnix
• Reef Octopus Varios 6 power supply bracket by VE2YTQ
• InbyLine Dual TDS Monitor cleated wall mount and hanger by @Sisterlimonpot
• 3byWay Valve Mount by @KStatefan
• 1/4 RODI Tubing Holder by @KStatefan
• RODI AutoFill/Shutoff by @Vnomus
• Tunze 6255 Power Brick Mount (STDby24050) by garbled
• Mount for TUNZE MultiController 7095 by Boxson
• Control box mount for Tunze Stream by garbled
• Tunze Osmolator (3155) bracket by VE2YTQ
• Tunze Osmolator Pump Stand v1.3 by dbloch
• Aquarium Heater Bracket by ksaathoff
• Eheim Aquarium Heater Holder Without Suction Cup by Funkenschuhster
• AI Hydra 26HD Light shade by ERC by @ludnix
• AI Prime HD Light Shade by ERC by @ludnix
• Aquatic Life t5HO Hybrid 18" Decorative Endcaps by @philshel
• Ecotech RMS rail AI Prime HD by sebaslaf
• Ecotech Radion RMS Mount TbyNut for Aluminum Extrusion by @lakai
• Radion Mount for Eurobrace tanks by @rickcavanaugh
• Radion XR15 Light Shade by @ludnix
• Lamp holder for Marsaqua 165W LED by ubit
• Nano Reef light 1x6 Watts by iChing
• Aquarium Water Level Sensor Holder by youngwing
• Adjustable Float switch bracket by karai
• Apogee PAR meter mount by @TheGerm
• Float Switch Brackets (includes various tank sizes) by sfgabe
• Float switch stand(5mm glass thickness) by Coppola
• Float Switch Holder (for the BRS 1/4" float valve) by cryptk
• Float switch holder by @Ranjib
• Float Sensor Bracket for Auto Top Off by CL72
• GHL Sensorholder 4x by jeracom
• Reef 10mm Buoy Support (float switch mount) by belda
• Seneye Reefer adapter by pikkenix
• Sensor Mount for Hydrofill Titanium ATO by @Vnomus

Fragging Items​

• Coral Frag Rack Foot by tklb
• Hang On Frag Rack by tklb
• Mini Frag Rack by UltiUser
• Zoanthid Frag Plugs by asevimli
• Grow Out Frag Disk by jesusdigsgraves
• Coral Frag Rack by @Zephrant
• Coral Frag Rack, corner by @Zephrant
• Coral Frag Cup by JohnWik
• Coral Frag Spike by @92Miata
• Coral rack by licordelpolo
• DIY Frag plug mold by SefVanlier
• Frag holders for honey jar by @fsamir
• Frag Plug Holder by dmglakewood
• Frag Photo Stand by drewprice
• Frag Plug Stand by @Red_Beard
• HoneyComb Frag Rack by Eel River Coral by @ludnix
• Joanne's Frag Plug by engineglue
• MAD Rack 41 by illconn
• MAD Rack Legs by @phasezero
• Magnetic Coral Frag Holder by @Schreiber
• Molds for coral frag bases by @fsamir
• Natural Looking Frag Plug Holder by @bo0ks
• Super Rack by 67 Frag Capacity by shigshwa
• Suction cup eggcrate bracket by sgraber
• Frag Rocks by drewprice

Pumps and Filtration​

• Aquarium Return Lift by @Zephrant
• Aquarium Flow (locbyline) by MrRecifCaptif
• Aquarium lily pipe by vaskap
• Nero 5 Super shield by sebaslaf
• NERO 5 Nem Guard by @rorkor
• nero 5 fan guard by domesticus
• Nero 5 guard by smoothdog001
• Nero 5 3mm Wire holder by 12mm Glass by Neptunian Cube K90 by willfly4food
• Nero 5 wire holder 10mm Glass by willfly4food
• Flow Eductor For Cobalt Pumps by roadkill6702
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP10 powerhead screen by doc1013
• Ecotech MP60 Dryside Case by @Sisterlimonpot
• Hydor Koralia Evo pump face by Duranza
• HYDOR Prime 20 Impeller by MrMaker192
• Jebao RWby8 Anti Snail Cover by AdriL
• Maxpect Gyre XFby280 Flow Deflector by @lakai
• Grid Tunze Nanostream by jeracom
• Protective grating replacement for Tunze® Nanostream® by xfifi
• Tunze 7096 controller (mount) by Laurent2142
• DIY Protein Skimmer Swabbie / Neck Cleaner by @MaccaPopEye
• Jebao DC4000 skimmer impeller (pinwheel) by rakita01
• Protien Skimmer Cap (coralife) by harddrv1
• Protein Skimmer (ver. 1) by the_mad_scientist
• Protein skimmer for sea water aquarium by Coppola
• Skimmer Air Muffler Plug by Super Reef Octopus SRO by TheClarkJB
• Skimmer Impeller Jebao DC3000 by Paragon_34
• Venturi Air Intake for Aquarium Pumpby jbramel
• Venturi Nozzle Jebao DC 3000 (V1) by Paragon_34
• Air powered aquarium filter by biohobbyist
• Algae Scrubber by @Justfbilly byBuild Thread
• ALGAE SCRUBBER by AQUARIUM FILTER ATS REEF (spanish) by IgorLuiz
• Aquarium Planter / Fish Hospital by ryanagon
• Automatic Fish Feeder by coberdas
• Bubble Magus Filter Roll Modification Drain by @Reef AquaCult
• Biocube Skimmer by @webmanny
• 4" BRS filter sock holder by @Sisterlimonpot
• DI Resin Packing Kit by @Red_Beard
• Donovan's Nitrate Destroyer by @MaccaPopEye
• Gate Valve for Bubble Magus Filter Roll by @Reef AquaCult
• NYOS Torq Grid (reactor divider) by yann44
• Sponge Filter by Aquarium by GBDave
• Two Little fishies Phosban Reactor disc by Britdub
• Box for Bacto Reef Balls 60x60x60 by whoopi4
• 1byinch PVC to 1/2byinch Wye Hose Adapter by @Vnomus
• aquarium 4 inch filter sock holder by @rickcavanaugh
• Filter Sock Silencer 4 inch v3.0 by dbloch
• 4" Sump Mounted Sock Holder by @NVCyberPro

Controller Related Items​

• Reef-Pi all in one enclosure by @Ranjib
• Reef-Pi by all in one enclosure for pi 3 by @Ranjib
• Reef-Pi Aquarium Controller Housing and Power Board by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain with blank I/O panel by @MaccaPopEye
• Reef-Pi Case by @Vnomus
• Reef-Pi 10 Port Plug Panel by AndyMcKay
• Reef-Pi 80mm Fan Bracket by AndyMcKay
• Reef-Pi Server and Pump Enclosure by sfgabe
• Raspberry Pi zero based Reef-Pi temperature controller enclosure by @Ranjib
• 8 US outlet remote relay boxby ScottBrew
• Bluefish Mini by One Piece Case by @Vnomus
• Neptune Apex Display bracket by DoctorLaser
• Apex Display Cradle by Prozium
• Apex Neptune Break Out Box by @reefinnewb
• Neptune Apex PMUP Mount by mikebaier
• Neptune Systems PMUP Optical Sensor Mount by revnull
• Neptune Systems PMUP Stand With Sensor by @alexjoha
• pmup V2 platform by @Sisterlimonpot
• Neptune Apex probe holder by bricenice25
• Neptune Apex Dos tube holders by manofcolombia
• Neptune Apex Breakout Box by @Gotfrogs
• Neptune COR Strainer by @Gotfrogs
• Cor20 Strainer by@CoralFan1776
• Neptune Systems Apex AFS Mount by markstubb
• Apex Probe Holder Tall by codemonkey812
• Apex Probe Holder Small by codemoney812
• Wall Mount for aquarium Pinpoint pH Meter by @rickcavanaugh
• Project Box - UXCell 12 way spring terminal strip by GreyBeard
• RO/DI Push Connect Valve Manifold by GreyBeard

Tools​

• RODI Wrench by Leviathan_Aquarium
• Aquarium drill template 35mm by zander82
• Aquarium Tool Holder by @fowler279
• Bed/Aquarium scraper by T_Hambrush
• Bristleworm Trap by @bo0ks
• Bristle Worm Trap by inventmarine by @fsamir
• Bulkhead Nut Tool (1" bulkheads?) by @Zephrant
• Bulkhead Nut Tools (1", 3/4") by @KStatefan
• Coral Viewer (6") by P3yt0r
• Forceps for Aquarium by azure93
• Hose Clamp by Pinch Valve by Tim_C
• Mini pelle pour aquarium (Mini shovel for aquarium)by ylc
• Wrench for a water purifier (Reverse Osmosis filter) resin tank cap by Reivax

Misc. ​

• Urchin Hats by Tart2000
• Aquarium Fish Cave by Chrlee
• Aquarium / Fish Tank Pipework / Pipes Ornament Parts by Steampunk by BigMrTong
• Plastic Reef #1: Random Anemone Generator by ferjerez
• Plastic Reef #3: Tube Sponge Generator by ferjerez
• Plastic Reef #5: Corals by ferjerez

Has anyone made a mount for an Adaptive Reef 6 way toggle switch box?

 

[Pod]

Does anyone have an stl for the impellers of a jebao cp40 gyre pump? Cant find any impellers to buy online

 

[porterreef]

Looking for a kessil a360 bracket that the goose neck screws into. Got a light that is missing that bracket.

 

[PeterC99]

Just added 3D printed light shades for my Ecotech Radion XR30 Pro Lights. Finding much less glare when looking at aquarium and getting less algae build up on the glass.

 

[JAIME_MTY]

Has anyone made a mount for an Adaptive Reef 6 way toggle switch box?

Any luck? , Iam also looking for mount.

 

[Kdango]

I am looking to print acrylic rod holders. I cannot seem to find the plans. Anyone have them?

 

[Frank_Aaron]

Just added 3D printed light shades for my Ecotech Radion XR30 Pro Lights. Finding much less glare when looking at aquarium and getting less algae build up on the glass.

Do you have an STL you can share?

 

[PeterC99]

Do you have an STL you can share?

I did not make these myself, I ordered these from @chemisfun11.

 

[chemisfun11]

I appreciate the referral @PeterC99 I just printed a custom set of hydra 32 shades for a reefer that saw your post here. Thanks again!

 

[PeterC99]

I appreciate the referral @PeterC99 I just printed a custom set of hydra 32 shades for a reefer that saw your post here. Thanks again!

Thanks again for my 3d printed Ecotech XR30 light shades! The benefits of the shades are amazing:

1) Reduces almost all glare from these strong lights
2) Directs more light into the aquarium - maximizing your lighting; colors pop
3) Significantly reduces algae build up on your aquarium glass (used to clean glass every 2 to 3 days, now it takes a week before I clean the glass, and the cleanup is much quicker because of less build up and I've increase the Light Point Intensity by 15%

 

[Danjoethepirate]

Has anyone 3D printed a shade for any of the t5/LED hybrids? More specifically the geisemann 60 inch?

 

[chemisfun11]

@Danjoethepirate
Most hobbyists aren't going to have a 3D printer large enough to print something that long. Anything that I could design would be in pieces and honestly would not look as nice as the one piece shades I've been designing and making. I have fairly large print bed, but the max length I could get out of it would be about 18.5"

 

[Danjoethepirate]

@chemisfun11 I understand the size is restrictive, just didn't know if there was anything out there.

 

[reefinnewb]

Kamoer x1 Pro T mount by bbondura

Simple mount for the Kamoer X1 Pro T dosing pump. This may also work on other Kamoer X1 products. I don't own any so I can't confirm. This is friction fit so it is very tight.

www.thingiverse.com

Kamoer X1 Pro T mount.

Might work with others, but that's the one I have.

 

[Griev]

My clearwater scrubber was a bit too loud for my liking so I printed a long "nozzle" of sorts to better direct the water down the screen. It's half as loud at a higher flow rate now!

 

[STEEZY]

Does anyone have a file to raise the water level on the Nuvo 20 and 25 that clips into the overflow?

Something like this?

EZ Water Level Adjuster (Full Set – Desktop) – EZ Reefing Solutions.

ez-dose.com

 

[minus9]

For the life of me I can't seem to find a file for a mushroom basket? I've made a rectangle one that I used from something else, but I need to make a couple round mushroom condos. I see them for sale everywhere, but I have a printer and want to make a couple. Anyone?
Example

 

[Kpdiver]

Does anyone have a file for the 1 inch eductor?

 

[Nmorell]

For the life of me I can't seem to find a file for a mushroom basket? I've made a rectangle one that I used from something else, but I need to make a couple round mushroom condos. I see them for sale everywhere, but I have a printer and want to make a couple. Anyone?
Example

I have a STL for one if you still need it?

 

[minus9]

I have a STL for one if you still need it?

That would be great! I found one on the open sites that I printed, which did the job (printed for a friend) but it has a solid base.