3d Printed Aquarium Parts Archive

[zbryant91]

If anyone has a Clarisea sk5000 g2 filter roller (although I think it will work for all g1-g3 models or even diy projects) and burns up motors every 12-24 months, below are links to prints that might help you. I remixed it off of the original model that @lakai (thingiverse) uploaded. Basically it’s a serviceable motor housing that threads together. @lakai did an amazing job with his OG version, which I really appreciate! This version allows for an upgraded, high torque, low rpm gear motor that has a larger motor and extra gear reduction section. I moved/strengthened the cable boss to be more like the newer upgraded oem g2 units, moved the roller screw holes to the newer upgraded oem g2 location and thread pitch. If you have the early version with self tapping roller screws I will be uploading the screws and rollers soon but I’m pretty sure there’s no original motors that are actually still working. I also made up a shortened motor coupling/crucifix and thumbscrew to allow for the longer than stock motor assy. This gear motor is available on Amazon for $15 and can be swapped out fairly easily if/when it burns up. Although I’m finding that the gear motors longevity is no longer the weak link with this upgrade, it’s the M3 screw for the coupling/crucifix that snaps now (and it’s a major pita to remove what’s broken off in the motor shaft when you have severe vision and dexterity issues!). I now replace that screw with every filter roll just to keep me from throwing things and cussing up a storm! Being as blind as I am, new to fusion360 and 3d printing which don‘t work well with screen readers, and having to use my phone to read my digital caliper display out loud which is buggy at best, and actually reducing myself to ask for sighted help when I just can’t go it alone, these are as good as they’re gong to get from me…..it was a major undertaking with a lot of headaches that I doubt I will attempt again in the near future, but I was on a mission to prove to myself that I could do it.….and someone else had already done the heavy lifting to boot @lakai! All three links are for the same project, just pick your poison thingiverse, printables, or makerworld.

https://www.thingiverse.com/thing:6315015

https://www.printables.com/model/647713-clarisea-sk5000-g2-extended-motor-housing-for-5rpm

https://makerworld.com/en/models/64700#profileId-67917

very nice. I have 2 gen 2s and 1 gen 3. I haven't had a motor go bad, but I have had 3 of the controllers die. good to know this is an option if a motor does go

 

[bozo]

you guys are the GOATs

 

[bsk997]

Awesome thread.
Anybody have the corner pieces for diy mesh screen from Soren? Thx

 

[Lowefx]

Can a MODERATOR update the main list on page 1?

 

[BrettE]

Can a MODERATOR update the main list on page 1?

They can. I was planning to, but I still haven't yet. Life has been getting in the way.

Also I'm honestly not sure a forum post is the best place, like a collection on thingiverse or similar might be better.

I'm sure we can make you (or anyone else) the owner of this thread too. I would certainly not be opposed if you would like to do the updating.

 

[dangles]

Does anybody have a good file for a universal power brick mount? There's one in the master list but the link is broken.

 

[Dom98540]

Does anybody have a good file for a universal power brick mount? There's one in the master list but the link is broken.

I have one that I designed and can post to Thingiverse. I've had a handful of them printed and they work pretty well. They use velcro straps that I purchased from Amazon: https://a.co/d/iSwukxI

I will update when the STL is available!

 

[dangles]

I have one that I designed and can post to Thingiverse. I've had a handful of them printed and they work pretty well. They use velcro straps that I purchased from Amazon: https://a.co/d/iSwukxI

I will update when the STL is available!

Cool can you post a photo?

What products can you confirm they work for?

 

[officialreefbros]

Does anyone have like a shared Google doc with all of them?

 

[Dom98540]

Cool can you post a photo?

What products can you confirm they work for?

Sure, here you go! I have used them for Maxspect Ethereal lights, but they are very universal, as you can see.

Here is the link to Thingiverse: https://www.thingiverse.com/thing:6397216
It may take a little bit to publish, but this link should work when it does. Let me know if you have issues.

 

[jrounding]

While setting up a nano reef for my shrimp who were viscously attacked by one of my fish (as you do) I decided I wanted to use a 12" blade to light it. I wanted to hang the light from my ceiling with some cheap light hooks I found on Amazon so I created the brackets at the link below. Then I added some corals and was disappointed with the color of the AI Blade Grow and decided to add a second light to the mix. I added an AI Blade Glow. So I created the second bracket which is a double light bracket with a 1.75 degree tilt towards center.

AI Blade Hanging Brackets: https://www.thingiverse.com/thing:6405595

 

[Nonya]

I've got one for a 1,000 gallon aquarium, but you have to print it with transparent aluminum.

 

[dangles]

While setting up a nano reef for my shrimp who were viscously attacked by one of my fish (as you do) I decided I wanted to use a 12" blade to light it. I wanted to hang the light from my ceiling with some cheap light hooks I found on Amazon so I created the brackets at the link below. Then I added some corals and was disappointed with the color of the AI Blade Grow and decided to add a second light to the mix. I added an AI Blade Glow. So I created the second bracket which is a double light bracket with a 1.75 degree tilt towards center.

AI Blade Hanging Brackets: https://www.thingiverse.com/thing:6405595

That’s awesome. What fastener did you use for the ends?

 

[Projects with Sam]

Nice design!

 

[jrounding]

That’s awesome. What fastener did you use for the ends?

8mm x 10mm stainless flat head socket cap screws fasteners from Amazon.


The cables are just hanging wires from amazon as well.

 

[magallonbuckinbulls]

Hello Everyone,

We are working on bringing back the "Master List" of 3D print files for the hobbyist and will be working on gathering links and data over the next few days. This will be a living document and things may change as we move along, but the intent is to provide a source for commonly used files for all our members to enjoy.

A couple of quick notes to get use started.

- If you have something you would like to include, please reply to this post or PM me and I will add it to the list. I can include your username if you would like in case anyone has any questions, etc.
- All included items will be for hobby/personal use only.
- If you have a commercial item you would like to include, you can contact revhtree to discuss options.
- If I post a link to an item and you own it and you do not want it included just PM me and I will remove it.
- I will try and categorize items to the best of my ability.
- This is for the community, so if you have any suggestions, please let me know.

I will try to keep up with this thread as new items become available.

Thanks everyone, looking forward to getting this going again.

Boost.

-------------------------------------------------------------------------------------------------

Maintenance Items​

• Mag Float Aquablade Attachment Mod by macdaddynick1
• Splash Shied Holder for Rimless Tank by macdaddynick1
• Nuvo 20 Filter Basket by Boostable
• Frozen Food Feeder Tube by SeeCoryRun
• Nori Feeder by Zephrant
• Filter Cup – RedSea by revnull
• Filter Cup – Waterbox by SenatorPOPS
• Nuvo – Media Basket by nitrografix
• Nori Feeder by RepRapTodd
• Algae scrapper for magfloat by Bksba
• Aquarium Vacuum attachment for Pump by Danceresort
• Blowbytobystart siphon (venturi effect) by Andrea Fontana
• EZbySnap Razor Blade Handle by AdanA
• MJ1200 Aquarium Vacuum by christhet
• Reef Mower by @Pickwun
• Vacuum Pump Attachment by @alexjoha

Equipment Mount Items​

• Temp Probe – DS18B20 Holder by uepsie
• Power Brick Mount by Torx1979
• MaxSpect Controller Mount by HarryPotterPrinter
• Aqamai Brain and Power Supply Holders by @Orbela
• Alkatronic Power Brick Wall Mount by @Sisterlimonpot
• Aqua Ultraviolet Mount (or any tube 2.5" diameter) by @philshel
• Aqua ilumination SOL Power Supply Holder by @rickcavanaugh
• CoralVue Varios4s Power Brick Mount by garbled
• Cobalt Air Pump Stand by icecool2 by 1
• Ecotech Vortech Pump Controller Mount by crispy01
• Ecosmart driver supports (controller mount) by Medina47
• Power Brick Mounts (Ecotech* and Jebao*) by Torx1979
• Ecotech Dual Vortech Controller Mount
• Ecotech M1 Vectra Power brick by@Sisterlimonpot
• Ecotech Radion XR15 Pro/MP10/MP40/VectraM1/M2 Quad Power Brick Holder
• Ecotech Radion XR30Pro Power Brick Holder by @rickcavanaugh
• Ecotech Radion XR30Pro Power Brick Holder by @alexjoha
• Ecotech Vectra Controller Mount by @ludnix
• XR15 power brick holder by @Skyfish
• Icecap 1k Gyre Power brick holder by @rickcavanaugh
• Replacement Bushing for Glamorca GP03 or Icecap 3K Gyre by devmsp
• Jebao Controller cradle by @fsamir
• Jebao DC9000 pump controller mount by niget2002
• Jebao RW controller cradle by vega77
• Jebao dc6000 controller cradle by vega77
• Jebao CPby40 Gyre controller bracket by AdriL
• Jebao/jecod controller hang on glass mount by @Krheigh
• Jebao Return Pump Controller Mount by tonea002
• Jebao Pump Controller Cradle (DC/DCT/DCP 50W) by @amps
• Kamoer X1 Pump by@Sisterlimonpot
• Kessil A360WE Power Brick Mount by @philshel
• MaxSpect Controller Cradle (250) by @TheHarold
• Maxspect gyre xf150 controller cradle by vega77
• Neptune COR20 Power brick mount by garbled
• Neptune CORby20 Power Supply Mounting Bracket by @Gotfrogs
• Orphek Atlantik Power Supply Mount by @ludnix
• Reef Octopus Varios 6 power supply bracket by VE2YTQ
• InbyLine Dual TDS Monitor cleated wall mount and hanger by @Sisterlimonpot
• 3byWay Valve Mount by @KStatefan
• 1/4 RODI Tubing Holder by @KStatefan
• RODI AutoFill/Shutoff by @Vnomus
• Tunze 6255 Power Brick Mount (STDby24050) by garbled
• Mount for TUNZE MultiController 7095 by Boxson
• Control box mount for Tunze Stream by garbled
• Tunze Osmolator (3155) bracket by VE2YTQ
• Tunze Osmolator Pump Stand v1.3 by dbloch
• Aquarium Heater Bracket by ksaathoff
• Eheim Aquarium Heater Holder Without Suction Cup by Funkenschuhster
• AI Hydra 26HD Light shade by ERC by @ludnix
• AI Prime HD Light Shade by ERC by @ludnix
• Aquatic Life t5HO Hybrid 18" Decorative Endcaps by @philshel
• Ecotech RMS rail AI Prime HD by sebaslaf
• Ecotech Radion RMS Mount TbyNut for Aluminum Extrusion by @lakai
• Radion Mount for Eurobrace tanks by @rickcavanaugh
• Radion XR15 Light Shade by @ludnix
• Lamp holder for Marsaqua 165W LED by ubit
• Nano Reef light 1x6 Watts by iChing
• Aquarium Water Level Sensor Holder by youngwing
• Adjustable Float switch bracket by karai
• Apogee PAR meter mount by @TheGerm
• Float Switch Brackets (includes various tank sizes) by sfgabe
• Float switch stand(5mm glass thickness) by Coppola
• Float Switch Holder (for the BRS 1/4" float valve) by cryptk
• Float switch holder by @Ranjib
• Float Sensor Bracket for Auto Top Off by CL72
• GHL Sensorholder 4x by jeracom
• Reef 10mm Buoy Support (float switch mount) by belda
• Seneye Reefer adapter by pikkenix
• Sensor Mount for Hydrofill Titanium ATO by @Vnomus

Fragging Items​

• Coral Frag Rack Foot by tklb
• Hang On Frag Rack by tklb
• Mini Frag Rack by UltiUser
• Zoanthid Frag Plugs by asevimli
• Grow Out Frag Disk by jesusdigsgraves
• Coral Frag Rack by @Zephrant
• Coral Frag Rack, corner by @Zephrant
• Coral Frag Cup by JohnWik
• Coral Frag Spike by @92Miata
• Coral rack by licordelpolo
• DIY Frag plug mold by SefVanlier
• Frag holders for honey jar by @fsamir
• Frag Plug Holder by dmglakewood
• Frag Photo Stand by drewprice
• Frag Plug Stand by @Red_Beard
• HoneyComb Frag Rack by Eel River Coral by @ludnix
• Joanne's Frag Plug by engineglue
• MAD Rack 41 by illconn
• MAD Rack Legs by @phasezero
• Magnetic Coral Frag Holder by @Schreiber
• Molds for coral frag bases by @fsamir
• Natural Looking Frag Plug Holder by @bo0ks
• Super Rack by 67 Frag Capacity by shigshwa
• Suction cup eggcrate bracket by sgraber
• Frag Rocks by drewprice

Pumps and Filtration​

• Aquarium Return Lift by @Zephrant
• Aquarium Flow (locbyline) by MrRecifCaptif
• Aquarium lily pipe by vaskap
• Nero 5 Super shield by sebaslaf
• NERO 5 Nem Guard by @rorkor
• nero 5 fan guard by domesticus
• Nero 5 guard by smoothdog001
• Nero 5 3mm Wire holder by 12mm Glass by Neptunian Cube K90 by willfly4food
• Nero 5 wire holder 10mm Glass by willfly4food
• Flow Eductor For Cobalt Pumps by roadkill6702
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP10 powerhead screen by doc1013
• Ecotech MP60 Dryside Case by @Sisterlimonpot
• Hydor Koralia Evo pump face by Duranza
• HYDOR Prime 20 Impeller by MrMaker192
• Jebao RWby8 Anti Snail Cover by AdriL
• Maxpect Gyre XFby280 Flow Deflector by @lakai
• Grid Tunze Nanostream by jeracom
• Protective grating replacement for Tunze® Nanostream® by xfifi
• Tunze 7096 controller (mount) by Laurent2142
• DIY Protein Skimmer Swabbie / Neck Cleaner by @MaccaPopEye
• Jebao DC4000 skimmer impeller (pinwheel) by rakita01
• Protien Skimmer Cap (coralife) by harddrv1
• Protein Skimmer (ver. 1) by the_mad_scientist
• Protein skimmer for sea water aquarium by Coppola
• Skimmer Air Muffler Plug by Super Reef Octopus SRO by TheClarkJB
• Skimmer Impeller Jebao DC3000 by Paragon_34
• Venturi Air Intake for Aquarium Pumpby jbramel
• Venturi Nozzle Jebao DC 3000 (V1) by Paragon_34
• Air powered aquarium filter by biohobbyist
• Algae Scrubber by @Justfbilly byBuild Thread
• ALGAE SCRUBBER by AQUARIUM FILTER ATS REEF (spanish) by IgorLuiz
• Aquarium Planter / Fish Hospital by ryanagon
• Automatic Fish Feeder by coberdas
• Bubble Magus Filter Roll Modification Drain by @Reef AquaCult
• Biocube Skimmer by @webmanny
• 4" BRS filter sock holder by @Sisterlimonpot
• DI Resin Packing Kit by @Red_Beard
• Donovan's Nitrate Destroyer by @MaccaPopEye
• Gate Valve for Bubble Magus Filter Roll by @Reef AquaCult
• NYOS Torq Grid (reactor divider) by yann44
• Sponge Filter by Aquarium by GBDave
• Two Little fishies Phosban Reactor disc by Britdub
• Box for Bacto Reef Balls 60x60x60 by whoopi4
• 1byinch PVC to 1/2byinch Wye Hose Adapter by @Vnomus
• aquarium 4 inch filter sock holder by @rickcavanaugh
• Filter Sock Silencer 4 inch v3.0 by dbloch
• 4" Sump Mounted Sock Holder by @NVCyberPro

Controller Related Items​

• Reef-Pi all in one enclosure by @Ranjib
• Reef-Pi by all in one enclosure for pi 3 by @Ranjib
• Reef-Pi Aquarium Controller Housing and Power Board by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain with blank I/O panel by @MaccaPopEye
• Reef-Pi Case by @Vnomus
• Reef-Pi 10 Port Plug Panel by AndyMcKay
• Reef-Pi 80mm Fan Bracket by AndyMcKay
• Reef-Pi Server and Pump Enclosure by sfgabe
• Raspberry Pi zero based Reef-Pi temperature controller enclosure by @Ranjib
• 8 US outlet remote relay boxby ScottBrew
• Bluefish Mini by One Piece Case by @Vnomus
• Neptune Apex Display bracket by DoctorLaser
• Apex Display Cradle by Prozium
• Apex Neptune Break Out Box by @reefinnewb
• Neptune Apex PMUP Mount by mikebaier
• Neptune Systems PMUP Optical Sensor Mount by revnull
• Neptune Systems PMUP Stand With Sensor by @alexjoha
• pmup V2 platform by @Sisterlimonpot
• Neptune Apex probe holder by bricenice25
• Neptune Apex Dos tube holders by manofcolombia
• Neptune Apex Breakout Box by @Gotfrogs
• Neptune COR Strainer by @Gotfrogs
• Cor20 Strainer by@CoralFan1776
• Neptune Systems Apex AFS Mount by markstubb
• Apex Probe Holder Tall by codemonkey812
• Apex Probe Holder Small by codemoney812
• Wall Mount for aquarium Pinpoint pH Meter by @rickcavanaugh
• Project Box - UXCell 12 way spring terminal strip by GreyBeard
• RO/DI Push Connect Valve Manifold by GreyBeard

Tools​

• RODI Wrench by Leviathan_Aquarium
• Aquarium drill template 35mm by zander82
• Aquarium Tool Holder by @fowler279
• Bed/Aquarium scraper by T_Hambrush
• Bristleworm Trap by @bo0ks
• Bristle Worm Trap by inventmarine by @fsamir
• Bulkhead Nut Tool (1" bulkheads?) by @Zephrant
• Bulkhead Nut Tools (1", 3/4") by @KStatefan
• Coral Viewer (6") by P3yt0r
• Forceps for Aquarium by azure93
• Hose Clamp by Pinch Valve by Tim_C
• Mini pelle pour aquarium (Mini shovel for aquarium)by ylc
• Wrench for a water purifier (Reverse Osmosis filter) resin tank cap by Reivax

Misc. ​

• Urchin Hats by Tart2000
• Aquarium Fish Cave by Chrlee
• Aquarium / Fish Tank Pipework / Pipes Ornament Parts by Steampunk by BigMrTong
• Plastic Reef #1: Random Anemone Generator by ferjerez
• Plastic Reef #3: Tube Sponge Generator by ferjerez
• Plastic Reef #5: Corals by ferjerez

This is awesome. Great job putting all these models together.

A section for 3D modeled equipment, tanks, mods, etc. would be cool.

let me know what I can help with in 3D modeling. I use AutoCAD 2024. .

 

[magallonbuckinbulls]

Hello Everyone,

We are working on bringing back the "Master List" of 3D print files for the hobbyist and will be working on gathering links and data over the next few days. This will be a living document and things may change as we move along, but the intent is to provide a source for commonly used files for all our members to enjoy.

A couple of quick notes to get use started.

- If you have something you would like to include, please reply to this post or PM me and I will add it to the list. I can include your username if you would like in case anyone has any questions, etc.
- All included items will be for hobby/personal use only.
- If you have a commercial item you would like to include, you can contact revhtree to discuss options.
- If I post a link to an item and you own it and you do not want it included just PM me and I will remove it.
- I will try and categorize items to the best of my ability.
- This is for the community, so if you have any suggestions, please let me know.

I will try to keep up with this thread as new items become available.

Thanks everyone, looking forward to getting this going again.

Boost.

-------------------------------------------------------------------------------------------------

Maintenance Items​

• Mag Float Aquablade Attachment Mod by macdaddynick1
• Splash Shied Holder for Rimless Tank by macdaddynick1
• Nuvo 20 Filter Basket by Boostable
• Frozen Food Feeder Tube by SeeCoryRun
• Nori Feeder by Zephrant
• Filter Cup – RedSea by revnull
• Filter Cup – Waterbox by SenatorPOPS
• Nuvo – Media Basket by nitrografix
• Nori Feeder by RepRapTodd
• Algae scrapper for magfloat by Bksba
• Aquarium Vacuum attachment for Pump by Danceresort
• Blowbytobystart siphon (venturi effect) by Andrea Fontana
• EZbySnap Razor Blade Handle by AdanA
• MJ1200 Aquarium Vacuum by christhet
• Reef Mower by @Pickwun
• Vacuum Pump Attachment by @alexjoha

Equipment Mount Items​

• Temp Probe – DS18B20 Holder by uepsie
• Power Brick Mount by Torx1979
• MaxSpect Controller Mount by HarryPotterPrinter
• Aqamai Brain and Power Supply Holders by @Orbela
• Alkatronic Power Brick Wall Mount by @Sisterlimonpot
• Aqua Ultraviolet Mount (or any tube 2.5" diameter) by @philshel
• Aqua ilumination SOL Power Supply Holder by @rickcavanaugh
• CoralVue Varios4s Power Brick Mount by garbled
• Cobalt Air Pump Stand by icecool2 by 1
• Ecotech Vortech Pump Controller Mount by crispy01
• Ecosmart driver supports (controller mount) by Medina47
• Power Brick Mounts (Ecotech* and Jebao*) by Torx1979
• Ecotech Dual Vortech Controller Mount
• Ecotech M1 Vectra Power brick by@Sisterlimonpot
• Ecotech Radion XR15 Pro/MP10/MP40/VectraM1/M2 Quad Power Brick Holder
• Ecotech Radion XR30Pro Power Brick Holder by @rickcavanaugh
• Ecotech Radion XR30Pro Power Brick Holder by @alexjoha
• Ecotech Vectra Controller Mount by @ludnix
• XR15 power brick holder by @Skyfish
• Icecap 1k Gyre Power brick holder by @rickcavanaugh
• Replacement Bushing for Glamorca GP03 or Icecap 3K Gyre by devmsp
• Jebao Controller cradle by @fsamir
• Jebao DC9000 pump controller mount by niget2002
• Jebao RW controller cradle by vega77
• Jebao dc6000 controller cradle by vega77
• Jebao CPby40 Gyre controller bracket by AdriL
• Jebao/jecod controller hang on glass mount by @Krheigh
• Jebao Return Pump Controller Mount by tonea002
• Jebao Pump Controller Cradle (DC/DCT/DCP 50W) by @amps
• Kamoer X1 Pump by@Sisterlimonpot
• Kessil A360WE Power Brick Mount by @philshel
• MaxSpect Controller Cradle (250) by @TheHarold
• Maxspect gyre xf150 controller cradle by vega77
• Neptune COR20 Power brick mount by garbled
• Neptune CORby20 Power Supply Mounting Bracket by @Gotfrogs
• Orphek Atlantik Power Supply Mount by @ludnix
• Reef Octopus Varios 6 power supply bracket by VE2YTQ
• InbyLine Dual TDS Monitor cleated wall mount and hanger by @Sisterlimonpot
• 3byWay Valve Mount by @KStatefan
• 1/4 RODI Tubing Holder by @KStatefan
• RODI AutoFill/Shutoff by @Vnomus
• Tunze 6255 Power Brick Mount (STDby24050) by garbled
• Mount for TUNZE MultiController 7095 by Boxson
• Control box mount for Tunze Stream by garbled
• Tunze Osmolator (3155) bracket by VE2YTQ
• Tunze Osmolator Pump Stand v1.3 by dbloch
• Aquarium Heater Bracket by ksaathoff
• Eheim Aquarium Heater Holder Without Suction Cup by Funkenschuhster
• AI Hydra 26HD Light shade by ERC by @ludnix
• AI Prime HD Light Shade by ERC by @ludnix
• Aquatic Life t5HO Hybrid 18" Decorative Endcaps by @philshel
• Ecotech RMS rail AI Prime HD by sebaslaf
• Ecotech Radion RMS Mount TbyNut for Aluminum Extrusion by @lakai
• Radion Mount for Eurobrace tanks by @rickcavanaugh
• Radion XR15 Light Shade by @ludnix
• Lamp holder for Marsaqua 165W LED by ubit
• Nano Reef light 1x6 Watts by iChing
• Aquarium Water Level Sensor Holder by youngwing
• Adjustable Float switch bracket by karai
• Apogee PAR meter mount by @TheGerm
• Float Switch Brackets (includes various tank sizes) by sfgabe
• Float switch stand(5mm glass thickness) by Coppola
• Float Switch Holder (for the BRS 1/4" float valve) by cryptk
• Float switch holder by @Ranjib
• Float Sensor Bracket for Auto Top Off by CL72
• GHL Sensorholder 4x by jeracom
• Reef 10mm Buoy Support (float switch mount) by belda
• Seneye Reefer adapter by pikkenix
• Sensor Mount for Hydrofill Titanium ATO by @Vnomus

Fragging Items​

• Coral Frag Rack Foot by tklb
• Hang On Frag Rack by tklb
• Mini Frag Rack by UltiUser
• Zoanthid Frag Plugs by asevimli
• Grow Out Frag Disk by jesusdigsgraves
• Coral Frag Rack by @Zephrant
• Coral Frag Rack, corner by @Zephrant
• Coral Frag Cup by JohnWik
• Coral Frag Spike by @92Miata
• Coral rack by licordelpolo
• DIY Frag plug mold by SefVanlier
• Frag holders for honey jar by @fsamir
• Frag Plug Holder by dmglakewood
• Frag Photo Stand by drewprice
• Frag Plug Stand by @Red_Beard
• HoneyComb Frag Rack by Eel River Coral by @ludnix
• Joanne's Frag Plug by engineglue
• MAD Rack 41 by illconn
• MAD Rack Legs by @phasezero
• Magnetic Coral Frag Holder by @Schreiber
• Molds for coral frag bases by @fsamir
• Natural Looking Frag Plug Holder by @bo0ks
• Super Rack by 67 Frag Capacity by shigshwa
• Suction cup eggcrate bracket by sgraber
• Frag Rocks by drewprice

Pumps and Filtration​

• Aquarium Return Lift by @Zephrant
• Aquarium Flow (locbyline) by MrRecifCaptif
• Aquarium lily pipe by vaskap
• Nero 5 Super shield by sebaslaf
• NERO 5 Nem Guard by @rorkor
• nero 5 fan guard by domesticus
• Nero 5 guard by smoothdog001
• Nero 5 3mm Wire holder by 12mm Glass by Neptunian Cube K90 by willfly4food
• Nero 5 wire holder 10mm Glass by willfly4food
• Flow Eductor For Cobalt Pumps by roadkill6702
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP40 Guards by MaxGessi
• Ecotech Vortech MP10 powerhead screen by doc1013
• Ecotech MP60 Dryside Case by @Sisterlimonpot
• Hydor Koralia Evo pump face by Duranza
• HYDOR Prime 20 Impeller by MrMaker192
• Jebao RWby8 Anti Snail Cover by AdriL
• Maxpect Gyre XFby280 Flow Deflector by @lakai
• Grid Tunze Nanostream by jeracom
• Protective grating replacement for Tunze® Nanostream® by xfifi
• Tunze 7096 controller (mount) by Laurent2142
• DIY Protein Skimmer Swabbie / Neck Cleaner by @MaccaPopEye
• Jebao DC4000 skimmer impeller (pinwheel) by rakita01
• Protien Skimmer Cap (coralife) by harddrv1
• Protein Skimmer (ver. 1) by the_mad_scientist
• Protein skimmer for sea water aquarium by Coppola
• Skimmer Air Muffler Plug by Super Reef Octopus SRO by TheClarkJB
• Skimmer Impeller Jebao DC3000 by Paragon_34
• Venturi Air Intake for Aquarium Pumpby jbramel
• Venturi Nozzle Jebao DC 3000 (V1) by Paragon_34
• Air powered aquarium filter by biohobbyist
• Algae Scrubber by @Justfbilly byBuild Thread
• ALGAE SCRUBBER by AQUARIUM FILTER ATS REEF (spanish) by IgorLuiz
• Aquarium Planter / Fish Hospital by ryanagon
• Automatic Fish Feeder by coberdas
• Bubble Magus Filter Roll Modification Drain by @Reef AquaCult
• Biocube Skimmer by @webmanny
• 4" BRS filter sock holder by @Sisterlimonpot
• DI Resin Packing Kit by @Red_Beard
• Donovan's Nitrate Destroyer by @MaccaPopEye
• Gate Valve for Bubble Magus Filter Roll by @Reef AquaCult
• NYOS Torq Grid (reactor divider) by yann44
• Sponge Filter by Aquarium by GBDave
• Two Little fishies Phosban Reactor disc by Britdub
• Box for Bacto Reef Balls 60x60x60 by whoopi4
• 1byinch PVC to 1/2byinch Wye Hose Adapter by @Vnomus
• aquarium 4 inch filter sock holder by @rickcavanaugh
• Filter Sock Silencer 4 inch v3.0 by dbloch
• 4" Sump Mounted Sock Holder by @NVCyberPro

Controller Related Items​

• Reef-Pi all in one enclosure by @Ranjib
• Reef-Pi by all in one enclosure for pi 3 by @Ranjib
• Reef-Pi Aquarium Controller Housing and Power Board by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain by @MaccaPopEye
• Reef-Pi Aquarium Controller Brain with blank I/O panel by @MaccaPopEye
• Reef-Pi Case by @Vnomus
• Reef-Pi 10 Port Plug Panel by AndyMcKay
• Reef-Pi 80mm Fan Bracket by AndyMcKay
• Reef-Pi Server and Pump Enclosure by sfgabe
• Raspberry Pi zero based Reef-Pi temperature controller enclosure by @Ranjib
• 8 US outlet remote relay boxby ScottBrew
• Bluefish Mini by One Piece Case by @Vnomus
• Neptune Apex Display bracket by DoctorLaser
• Apex Display Cradle by Prozium
• Apex Neptune Break Out Box by @reefinnewb
• Neptune Apex PMUP Mount by mikebaier
• Neptune Systems PMUP Optical Sensor Mount by revnull
• Neptune Systems PMUP Stand With Sensor by @alexjoha
• pmup V2 platform by @Sisterlimonpot
• Neptune Apex probe holder by bricenice25
• Neptune Apex Dos tube holders by manofcolombia
• Neptune Apex Breakout Box by @Gotfrogs
• Neptune COR Strainer by @Gotfrogs
• Cor20 Strainer by@CoralFan1776
• Neptune Systems Apex AFS Mount by markstubb
• Apex Probe Holder Tall by codemonkey812
• Apex Probe Holder Small by codemoney812
• Wall Mount for aquarium Pinpoint pH Meter by @rickcavanaugh
• Project Box - UXCell 12 way spring terminal strip by GreyBeard
• RO/DI Push Connect Valve Manifold by GreyBeard

Tools​

• RODI Wrench by Leviathan_Aquarium
• Aquarium drill template 35mm by zander82
• Aquarium Tool Holder by @fowler279
• Bed/Aquarium scraper by T_Hambrush
• Bristleworm Trap by @bo0ks
• Bristle Worm Trap by inventmarine by @fsamir
• Bulkhead Nut Tool (1" bulkheads?) by @Zephrant
• Bulkhead Nut Tools (1", 3/4") by @KStatefan
• Coral Viewer (6") by P3yt0r
• Forceps for Aquarium by azure93
• Hose Clamp by Pinch Valve by Tim_C
• Mini pelle pour aquarium (Mini shovel for aquarium)by ylc
• Wrench for a water purifier (Reverse Osmosis filter) resin tank cap by Reivax

Misc. ​

• Urchin Hats by Tart2000
• Aquarium Fish Cave by Chrlee
• Aquarium / Fish Tank Pipework / Pipes Ornament Parts by Steampunk by BigMrTong
• Plastic Reef #1: Random Anemone Generator by ferjerez
• Plastic Reef #3: Tube Sponge Generator by ferjerez
• Plastic Reef #5: Corals by ferjerez

A section for DXF files would be cool too. For laser or router table projects.

 

[Greybeard]

My RO/DI push connect valve mount should probably be moved up to mounting equipment... It's a mount for 3x 1/4" valves, making a water distribution manifold.

Nice list

 

[wisnia99]

I wanted to share the basket/frag stand I made. Feel free to link it to the front post.
Its 9"x9"x4" (can be scaled down if needed)

Mushroom Basket - Frag stand by po2lony

This is a simple mushroom basket its 9"x9"x4" You can shrink it to any size. This can also be used as frag stand.

www.thingiverse.com

Thanks!

 

[D3DPrintedThingz]

finally had an idea how to show the flow on this RFG I have been tinkering away at, it is a slip design that PVC will slip in to. a different option than the loc line. I like it because it has a much wider diameter , much less flow restrictive , and doesnt pull water (or air) from the tanks body of water to create a tornado pulled from the surface. couldnt use the loc line RFG because i had to keep them 2-3" below the water surface