plumbing

Hi, I need to pass four 1.5"PVC pipes through an exterior stucco wall. I'm looking for ideas, pics and inspiration.... Thanks

Hey everyone. My return pump is spitting bubbles randomly just a little here and there like it’s sucking air from somewhere. The plumbing is ran up the back of the tank not through the return slot in the over flow. As it says in the title it’s not the skimmer or water splashing I know this for a...

I am selling my complete, custom Red Sea Reefer plumping setup and sump. I have $1450 worth of equipment and plumbing parts invested in the setup. This will fit the Red Sea Reefer 450 and the XL 525. Note: it will fit other Red Sea Reefer tanks with an appropriately sized custom stand. This...

Hello Everyone, I'm opening a fish store and have been building my custom acrylic tanks for my store and I want to make sure my plumbing is rock solid to prevent issues in the future. I'm looking for a simple system to run nothing super fancy. My tanks are set up on metal racks and will be...

Hey everyone, PLEASE bare with me as all my other tanks are AIO so I’ve never had to deal with any of this..... So my set up on my new 110g RR tank is coming alone slowly lol (too many costly issues coming up from sick kids to sick dog lol) total volume available if sump was FULL (which I hope...

I work as a landscape architect and one of our irrigation reps brought by some interesting products that I immediately thought would be great for plumbing my upcoming Reefer 250 Build. The product is PVC-Lock by Hydro-Rain. Rather than myself explaining it, here is the description per their...

hello, My 90gal is 7 months running. I plumbed it with a durso style drain which the noise level has always been fairly loud. Now that the tank is more established the plumbing seems to be getting even louder, my wife can’t take it anymore, she says I need to do something ASAP. So I’d like to...

Figured i would start a build thread for my new 93 gal cube. long story short i had a 55 gal tank build in my old house complete with sump and frag tank setup. moved to a new house and decided to try the all in one tank game. i hate it. i have not been happy with my 27 gal lagoon tank. great...

So the 120 gallon is gone. All fish are gone. Hanging on to some corals and inverts in a temporary 20 gallon long. I have been working on the 80 gallon build, and taking my time with it. Here's the progress so far.

I converted the metric plumbing of my Waterbox 100.3 to U.S. standard plumbing. I had no issues with the drains. However, I’m struggling with the return. Because of the length of the flow sensor for my Apex and the conversion fittings, I don’t have much room between the two barb fittings, where...

I successfully converted the metric-plumbed drains on my Waterbox 100.3 to 1” drains. Now, I am in the process of figuring out how to plumb my return. It has been converted from metric to 3/4”, and now I’m compiling a list of parts to order. I want to have a manifold so that I can plumb in my...

I’m into the plumbing stages of my first system with a sump. I have a Waterbox 100.3 that came with metric plumbing. I added unions and conversion fittings, which converted my two drains from 32mm to 1” and the return from 25mm to 3/4”. That is what happened below the tank. The pipes in the...

I have had a 40 breeder for a few months and coming from having nanos, sumps and plumbing are fairly new to me. I bought a used quiet one 4000(1022 gph) cut back with a valve and have a split return nozzle for my flow. I came across some forums saying to never use your return pump as a primary...

I am about to plumb the return for my 96 gallon reef. I am using a Varios 6 pump, and I plan to run a manifold off this pump in addition to the return for the tank. The return bulkheads for my tank are 3/4" X2. The Varios 6 can push 1700 GPH. 'd like to maximize my flow and have the following...

I had a custom sump that is reversed, filter socks on the right as you face the sump, because I have a dedicated sump room behind the tank. It has been running for about 14 months. I would like to replace the Sicce Syncra 4.0 with an Apex Cor-15 return pump. I also would like to add an Avast...

I am awaiting the delivery of my Waterbox 100.3, and it will be my first experience dealing with a sump. I have already purchased some equipment that I'd like to hard-plumb into a manifold, and I will be purchasing some in the future that I'd like to add on to the manifold. Following is the...

I would love advice on a design I am considering for a new build. In my current build I have a smaller sump (ruby cube 20" Trigger sump) and run the refugium in the section next to the skimmer along with some live rock for good measure. What I don't like about this setup is 1). its tight and...

Hi all, I am in the midst of plumbing my 1.5" ghost overflow bean-animal to my sump. On one side of a union I didn't get the PVC pushed all the way in - about a 3/16" space between the end of pvc and the bottom of the union. If I use it on my main drain am I asking for flow/noise/siphon...

Hello everyone, So i tried to go sockless for a full day just to try and see how it goes. I wa amazed by the big increase in noise levels from the drain line as well as the huge splashing that was going on! I've got an old photo i took before running my setup to give you an idea about where...

I'm installing a RO faucet on my sink and want to use the hole where the current dishwasher overflow drain is. Can anyone tell me if this green "Y" (and the overflow above the sink) is necessary for the dishwasher drain? Could i go directly into the garbage disposal from the dishwasher? I...

Hey all, Starting to plan my plumbing... I'm doing bean animal. Both main and secondary drain will go into socks in the first chamber. Does it matter which part of the sump the emergency drain empties into? Instead of the first chamber, is there any reason I shouldn't plumb into the...

Can anyone point me to where I can purchase the o-rings needed for the unions on a Geo 612 calcium reactor????? I would even get the union just to pull the o-ring out of it. Getting them from the orig manufacturer seems to take too long.

I've been looking all over for information on this, but how is everyone running their sump return? I mean, what size and type of bulkhead are you using, and what plumbing are you using in the tank to direct flow and the such? I'm using 1 1/4 inch pipe from the DT to the sump in a Bean Animal...

My tank is a strange AIO setup that poses some interesting situations as far as how to drill and plumb it. I was going to go with an overflow box, and drill the back glass, but then i got to thinking that i could use the existing weir and filter space built into the tank, and drill into that...

I am looking to build a ULM tank at some point that is fully automated and I have come across RODI units being plumbed directly to a sump or ATO within the cabinet to eliminate the need for carrying buckets of water. Redundancy of failsafes to ensure flooding the tank as well as your home does...