plumbing

Does anybody have any idea where I can get 25mm to 3/4 unions other than from coralvue? I'm trying to convert my waterbox plumbing and these things have been out of stock for 2 months. If there's an alternative that anybody knows of please let me know!

I am thinking of purchasing an L shaped tank! This thing is awesome and happens to replace my current 5’ tank perfectly with the bonus of the “L” Shape adding another dimension when you are in my fish room. It would end up being a 210 gallon mixed reef. For the price I think I am going to snag...

Hello so I purchased a core 20 pump to replace my Vectra S2 as a return pump. I’m going to remove the manifold thats inline my current return that feeds my reactors and have the cor pump as only a return. And my vectra I will plumb so it only feeds the reactors. I plan to just have it...

So I’m going back and forth on plumbing a 75 gallon tank for return lines, my 1inch drains x3 overflow will be PVC, so it ok to soft plumbing for the return. What’s the durability? any leaks to be worried about? I want to plumb 2 -3/4 returns on each side

Plumbing a 75gallon display tank and I have a 1500gph pump and 1 inch drains. My question would be, is it best to do 1inch or 3/4 drain with 3/4 bulkhead lock line. Trying to have the best flow less pressure loss

I mean, we hardly ever need the pressure rating, but I'm feeling the peer pressure to be one of the cool kids with grey fittings to go on my colored furniture grade pipe. Someone please tell me it's ok to use white schedule 40 fittings everywhere. They are cheaper and much more available in...

Hello everyone, I am new to the community so excuse my ignorance. I found my love for reef tanks in my teens, but my minimum wage job at 16 couldn’t dream of keeping up with the hobby, so I gave up on it. Now that I make adult money, and still don’t have children to feed, I can try again. I...

Hey everyone So I finished the return line for the 80G RR tank, what do you guys think? Now, I’m trying to plan out the return line. Any suggestions? Thanks!

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

So recently i set up my new 120gal tank, plumbed it all myself. Drain hole drilled called for a 1 1/2" but hole was cut wrong had to use 1 1/4" for my drain piping which the bulkhead was almost impossible to find by the way. The return was correct and is 3/4". My issue is that even though i have...

7.5 gallon with 1 gallon fuge over 8 months old. About 20 lbs live rock. Bare bottom . Tank inhabitants include 1 O. clownfish 2 acan colonies (about 10 heads) two hammer frags (2 heads) assorted zoas. I plumbed a filter loop using a power head and an inline water filter housing. Allowed to...

I was planning to plumb drains and returns with spa flex, but then I saw this at https://flexpvc.com/Guides/FlexHose.shtml under "Description": "Same Size as Sch 40 PVC pipe, Available in White, black or gray. White is NSF 51 rated (but not for potable water) Our main product." Another website...

Sorry I just saw this. Need to clean them all up. I have one Aqua-lifter and some tubing I can include also. Prices do not include shipping. CPR CS90. Newer, purchased after posting this. I was using on a frag setup. (600 GPH)$100 CPR CS50 It will need a new bulkhead unless you want to plumb...

Planning a 240g DT with 1.5" full bean overflow to 100g tank configured as sump. Returns: overflow has two 1" holes for return line. Standard sump configuration with refugium. No reactors or UV planned (may come later?) I want to run submersible. The sump already has a 1" bulkhead (currently...

I thought I could connect the return Y connector to the Ecotech L2 pump with barb fittings and flex tubing. But the Y connector barb fitting is sitting below the barb fitting for the return pump. The barbs are 1". Any suggestions of what i can do? Is there a better solutions for this?

I've recently purchased a 600x400x400 optiwhite nano tank and plan on drilling the tank myself. I haven't ordered and plumbing or started drilling the tank so i thought i best check with someone more experienced than myself. What is the best design / setup to run. I had ideally wanted to...

Hi y’all, so where do I start. Basically staying home for covid got me restarting my ig and one of the first posts I saw was a friends puffer fish and let me tell you is was love at first sight. After that day no matter how long this lockdown takes I know I won’t be bored. Every day I would...

Hi all! I bought a 180g acrylic tank with dual overflows secondhand. And I am just a little lost on how to do the plumbing. There are multiple holes on the tank, just wondering if they are output/input in terms of flow. Here are pics of the tank, if you guys can redirect me to any educational...

I am looking to buy a red sea reefer 170 tank only for $250 CAD soon, the only thing is it comes with none of the plumbing, return nozzles, overflow strainers, sump or stand. This is okay with me, I can make a good stand, and I have a spare sump. The only thing is I have no idea how to do the...

I have 3 brand new 1 1/2" IPEX True Union Ball valves. 2 sealed in the box, the other removed for photos. Have both slip and threaded fittings included. Looking to get $60 for all 3. That's cheaper than the price of 1.

So here is the thing I am currently new and plumbing my first tank. I am doing a Herbie overflow because that seems to be what fits on a tank that has 2 bulkheads. Essentially I have a sump with 2 filter socks and outlets to get plumbed to those filter socks. What I am trying to do is maximize...

Just taken delivery of a Red Sea P650 .. thought i'd start a thread to track my progress Gradually pulling together the equipment - countdown to first water in ~2 weeks! Room prep - new tile floor: Mixing station prep - slabs down: Water tanks and plumbing on it's way: P650 has...

I have a 20g long that I want to plump to a 10g sump, I was thinking of hard plumbing the return side with a gate valve, whats the quietest way to have it plumbed?

Hello all, I have once again come to seek your advice and knowledge. I recently acquired a custom 50 gallon acrylic tank with a back wall overflow. (pictures are included below). This will be plumbed into a Trigger Systems Ruby 30 sump. I am looking at having this tank set up towards the end of...