I thought I could connect the return Y connector to the Ecotech L2 pump with barb fittings and flex tubing.
But the Y connector barb fitting is sitting below the barb fitting for the return pump.
The barbs are 1".
Any suggestions of what i can do? Is there a better solutions for this?
I've recently purchased a 600x400x400 optiwhite nano tank and plan on drilling the tank myself.
I haven't ordered and plumbing or started drilling the tank so i thought i best check with someone more experienced than myself.
What is the best design / setup to run. I had ideally wanted to...
Hi y’all,
so where do I start. Basically staying home for covid got me restarting my ig and one of the first posts I saw was a friends puffer fish and let me tell you is was love at first sight. After that day no matter how long this lockdown takes I know I won’t be bored. Every day I would...
Hi all! I bought a 180g acrylic tank with dual overflows secondhand. And I am just a little lost on how to do the plumbing. There are multiple holes on the tank, just wondering if they are output/input in terms of flow. Here are pics of the tank, if you guys can redirect me to any educational...
I am looking to buy a red sea reefer 170 tank only for $250 CAD soon, the only thing is it comes with none of the plumbing, return nozzles, overflow strainers, sump or stand. This is okay with me, I can make a good stand, and I have a spare sump. The only thing is I have no idea how to do the...
aquarium plumbing
aquarium sump plumbing
custom plumbingplumbingplumbing help
plumbing red sea reefer
red sea 170
red sea reefer
red sea reefer 170
reefer 170
I have 3 brand new 1 1/2" IPEX True Union Ball valves. 2 sealed in the box, the other removed for photos. Have both slip and threaded fittings included. Looking to get $60 for all 3. That's cheaper than the price of 1.
So here is the thing I am currently new and plumbing my first tank. I am doing a Herbie overflow because that seems to be what fits on a tank that has 2 bulkheads. Essentially I have a sump with 2 filter socks and outlets to get plumbed to those filter socks. What I am trying to do is maximize...
Just taken delivery of a Red Sea P650 .. thought i'd start a thread to track my progress
Gradually pulling together the equipment - countdown to first water in ~2 weeks!
Room prep - new tile floor:
Mixing station prep - slabs down:
Water tanks and plumbing on it's way:
P650 has...
I have a 20g long that I want to plump to a 10g sump, I was thinking of hard plumbing the return side with a gate valve, whats the quietest way to have it plumbed?
Hello all, I have once again come to seek your advice and knowledge. I recently acquired a custom 50 gallon acrylic tank with a back wall overflow. (pictures are included below). This will be plumbed into a Trigger Systems Ruby 30 sump. I am looking at having this tank set up towards the end of...
My First Plumbing! need Helps, Tips, and Ideas( please see the pictures)
Hi guys
hope everyone doing well these days.
I'm gonna start with the story about my stand first.
I visited my local fish shop to buy some snails and end up buying that stand ( I'm sure you all have those moments)...
Was thinking last night about most efficient way to plumb a return pump with 40mm output to Red Sea Reefer 25mm return pipe. Looking to minimise running cost and noise from back pressure. So, is it better to run 40mm pipe from the pump up and as far as possible then reduce down or, reduce to the...
I got a really good deal on a deep blue 57g reef ready rimless tank, but the center overflow takes up way too much space in the display. I'd like to remove the overflow, patch the holes in the bottom, and drill new holes in the back to plumb a low profile overflow and return. Has anyone done...
Hey there so I’m setting up a 125 display tank and plan to design the plumbing and have already made the sump. I decided to make a graphic in photoshop of my design and need some help on what I could do better or what could be wrong with this design. Never had a tank with a sump nor this size...
I'm planning on creating a "fish room" in the garage to hold my remote sump, mixing station, filters, etc..... Right now I have a house layout as such:
Fish tank is going to go in the "fish tank" area.
Can I run the plumbing from the behind the fish tank, along the bedroom / office wall...
So basically ive been told that until we find a larger house i am on a tank restriction. I can add whatever i want to under the tank including tanks just nothing unsightly outside of my undisputed territorial lines. As of now i have a mess of wires and neat freaks nightmare for a sump fuge area...
I have a new Planet 120 that is being delivered tomorrow, and I'm working on my plumbing design. It is an internal overflow box that is pre-drilled with 4 holes (2 x 1" & 2 x 3/4"). It is obviously ran this way to run 2 drain and 2 return. I've ran Herbie before with great success, but I like...
Hello All,
I am somewhat new to the forums and to the saltwater hobby. It may be a bit if a task to start with a 200 gallon, but I am very eager to do so.
I have done a ton of reading on here, and right now I planning the plumbing so I can start getting the materials.
To explained the drawing...
Hello,
I have a Waterbox 130.4 ordered and I want to get all of the plumbing parts I need before it gets here. I emailed @Waterbox Aquariums and got the dumbest answer. "There are many different versions over the years, but they are all similar so I'm not sure exactly what you will get."...
Hi All, I am just starting to setup a 210 dual mega flow tank. Right now I am designing the plumbing, or at least trying to.
I am going to be running a DC return pump that is rated 3100gph @24 feet head pressure, hence the idea I have for the overflows. The sump was just a quick sketch to show...
I am working on putting together a new frag system. It will consist of a 40-gallon breeder and a Bashsea Smart Series sump. The sump has three 1.5" drain connections, which is helpful as I intend to use a Bean Animal configuration. However, that is where I need your assistance as I decided to...
I just finished plumbing my tank and it only has one hole drilled in the overflow. So i decided to plumb it using a durso standpipe. I even got a cap and drilled a hole in it and pht some airline tubing in the hole with a ball valve. As soon as i started running the tank with water i noticed...
Hello,
So it's been quiet a while since i started my 100G setup...
Tank is a CadLights Artisan 100G, comes with Durso stand pipe drain, that has 1x 1.25" drain pipe, and 2x 0.75" pipes one for emergency drain and one for return.
My water height is almost at halfway through the teeth of the...