so Ive been looking into this for a while. I wanted minimal impact on looks of my tanks. Well I found the perfect solution. Only 1 type of item required, well and im going to spray them with Krylon Fusion Black. They offer a 1/2inch size also, these 7/16in. fit my smaller tanks perfectly...
So I've been "aquariuming" for awhile however, I did not gain good experience due to rash teenage decisions and mostly blew my money on equipment/fish I didn't know how to use/care for. Now after college I'm back and have the money/patience to do it right.
ANYWAYS I have a 55g display tank and...
Hi all. I'm keen to set up a gravity fed pvc pipe coast to coast weir overflow for my new 250litre tank. (very similar to the setup in this video: ).
I have a couple of questions and any comments will be hugely helpful.
1. Will 25mm (1inch) pipe and bulkheads be sufficient if l have a 1...
Sup guys?
So I am going to be building a shallow reef tank. The dimensions will be 36x24x12. I will be using starphire glass on the front and two sides, regular glass on the back and I want to put PVC on the bottom anyone have any experience with that?
Is there any difference in putting it...
I recently purchased a Gen 3 Xr15W Pro and spent a few hours trying to get it to turn on. After trying for some time I decided to try using my AI Prime Power Supply to power my Radion. Sure enough it powered on, which made me determine my radion power supply broken. Does anyone know where I can...
I've been wondering can't I just put a cotton sheet on egg crate on top of a mesh filter sock. Bcuz this seems cheaper and seems it might work. Also any suggestions on a cheap and more important QUIET skimmer for my bed room. (60 gal)
I have a 220 gallon display with 75 gallon sump. this is my 2nd reef tank and and its taken me almost a year to get it up and running. It has pretty much sat empty in my basement untill i had enough funds to get it fixed and in my wall. Finally have it up and running and in the past few months...
Before setting up my aquarium, I wanted to see what all was on the circuit with the outlet I'm planning to use for everything. The outlet is connected to the GFI protected strip of outlets in my kitchen...kind of crazy wiring since the outlet I'm planning on using is in a dining room NOT...
Alright. So dilemma here. I have a 55 gallon acrylic tank. Had it up and running for approx 6 months. When I bought it, all it had for a return is a 1" hose. I want to hardplumb the tank so I purchased all the piping I'd need and bulkheads. The return goes into the tank from the top, so there's...
In this hobby, if you haven't DIY'ed something you haven't been at it long or you are extremely well off. Even if you are the latter this hobby inspires creativity, and have probably given something a go.
Personally I love DIY as part of my reefing journey and that goes well with the fact that...
How did your DIY screen net top turn out? Post some pics - we want to see!
Also, we're looking for tips and tricks to help other reefers make the project easier or better, or even improve the end result.
Our tip: use a hair dryer to heat the netting and shrink up any slack, just be careful not...
I was going to try to make my own heater/chiller controller. I've found a bunch of all purpose temperature controllers on amazon and I was wondering if anyone has a suggestion on which brand or controller to get. Anyone which past experience have any suggestions? I was most seriously looking at...
Hey DIYers!
Later this month, I am going to be back in the reefkeeping after moving across the country and buying a house. I have a larger skimmer from previous builds and would like to use this with a refugium. Doing so, I have decided to run a 40b tank with a 40b sump until I inevitably...
Ok, so let me start this off on the right foot here.
I'm going to be new to the SW side of things and have millions of questions, but there is no way to ask them all now.
A little bit about myself before I start asking questions. I have had multiple FW aquariums (from 10gal to 120gal) and am...
Hey Guys and Gals!
My first R2R Post!
So a little background:
My name is Brandon and I've been into aquariums for nearly my entire life, ( Sounds like an AA intro I know ) saltwater though, for years, has been my main infatuation. After putting myself through college and living in anti-tank...
ATS Description
I've been trying out a DIY "SURF"-style algae scrubber for more than a year, but its nutrient export doesnt keep up with my feeding, so I want to give the algae scrubbing method a "last chance"... Now I've started making myself a quality waterfall style ATS. Instead of just...
Hello all,
Not sure if this is allowed but I would like to share my newly finished 180g cube reef. If this is against the R2R forum rules please delete.
Original thread at link below!
https://www.reef2reef.com/threads/180g-36-x-36-x-32-cube-project-complete.285818/
Newish to the forum and only about a year into my salt/reef experience, I have learned a TON from my 47 gallon column I have now with just a snowflake clown, scarlet cleaner shrimp and some inverts and a Kenya tree and zoa, but I've had enough of the "wet armpit" syndrome trying to work on it...
*Projected Seahorses by March-ish 2017
I have put together a tank for a pair of Seahorses.
Dimensions: 18x18x30h
Capacity: ~42 US Gallons
Glass: 1/2" annealed
I was planning on using a canister filter(Fluval 306) I had acquired as part of a package deal of equipment, but now I'm thinking that...
I had an idea for a phyto drip system. I am considering trying to make it when I have more time to devote to it. Would love to hear everyone's thoughts on this.
Dementions:
16x16x30
Equipment:
OceanRevive Arctic-T247
Smart ATO- Micro
Via Aqua 305 Water Pump
Aquatic Life 115 Skimmer
Filtration
Marine Pure balls and one 1" block
Live stock
2 Firefish
Stary blenny
Shrimp goby
Hi fin goby
pistol shrimp
PJ cardinal (obligatory first fish)
Clean up crew...
Currently working on setting up my first saltwater aquarium and taking some time to work on my sump design while my live rock is curing. I've read tons on the forums about sump designs and finally sat down and drew out 2 sump proposals for my 40gal breeder sump...to be used on a 75g aquarium...
So inside of the canopy (which measures 36" x 36" OD) I have 4 SB reef lights and a 250w Radium w/ Spyder reflectors. I want to put a sheet of wither polycarbonate or glass over the bottom, inside the canopy to either a.) help diffuse the light into a uniform source (I do know MH's don't need...