Hey gang, I had the good fortune of buying a custom built 300 gallon glass aquarium and custom built stand from my dentist a few months back. I've been telling him for a few years that I want to buy the aquarium because he didn't ever have any water in it (the previous dentist in the practice...
I have 2 lights and wondering if there's a way to mount both together, in market or diy.
Also I dont really want to drill in the roof or anything fancy, just a clamp on mount.
Thanks
Hello everyone, I finally became a member today. I have been keeping a reef tank for 2 years with the full support of my hubby.
I have been reading the posts here and some info online with regards to the set up. I now plan to build an 8ft tank Stan and order a dt and sump and just do the...
I need some ideas/advice on the best place to put a refugium in my nuvo lagoon 25’s sump section. If you have done it or know how you’re going to do it let me see/know please!!
Hello all! So I've been gone for a while but I think this is a fun come back for me. So if you know me you know I have a two year old zebra moray eel and a one year old foxface, both are getting pretty big, though eel will be fine in there for a few more years but might as well get this out of...
Just finished up helping with a custom 3D print for @KTipp and had a lot of fun doing it. If there is anyone else that needs any help with anything let me know as I am more then happy to help if I can! It did end up costing KTipp a couple bucks for the plastic but I still think it will be...
Just wanted to start a build thread, I've had a few people ask where to follow along and for me to do a build thread. I post everything on my Instagram bur not everyone has an IG. Here it goes! Any questions just ask. It'll be mostly pics.
Hey everybody...
First off, here's my current tank - upgraded from a 10 gallon a week ago. (yes, I started with picos roughly three years ago)
I worked on the stand for about 4 months or so while I was remodeling the house my girlfriend bought. I would have built it faster but I was...
JUST A LITTLE PROJECT I DID WITH TWO TANKS I HAD LYING AROUND ONE WAS A 40 BREEDER THE OTHER WAS A 29 GALLON BIOCUBE, TAKING THE FALSE WALL OUT OF THE CUBE WAS ALOT EASIER WHEN YOU DONT CARE ABOUT THE REST OF THE TANK...LOL
My Auto-Aquarium Adventures
The only thing more frustrating than unknown problems in a project is having nobody to share them with. I’ll be chronicling the adventures of my Reef-Pi troubleshooting as I dive into what could wind up being a multi-week undertaking. If you're already familiar...
So I have this nice 150 gallon tank but the glass has a big chip in the corner. I was able to get a new piece of glass the exact size and I am planning to switch the panels out (the big side panel). ive never changed aquarium glass before let alone a massive one like this. Is there anything I...
Well I figured I would start up a thread so I could track my new build! (Kinda figured this would be more for myself!)
Well to start, I have built a 40 Gallon Nano Tank and loved every moment of it. I did Battle with a few things being a small tank but the joys you get from a nice tank out...
As title indicates, building a new system (two nano 30gal tanks plumbed into one sump, but that's a topic for another day) and planning to incorporate a Clarisea SK-3000 automat filtration. Basically, as I understand it from the instructions and videos, water enters the filter and exits through...
Prelude: This build actually has it's origins back in July of 2018 with a decision to try out a saltwater aquarium. I have had a fair number of years keeping fresh water tanks, but really nothing too involved even there. After a lot of research, with help from members at Reef2Reef, the first...
I’ve been slowly amassing the materials to start up a new 40-gallon reef tank. It’s been 6+ months in the making, and I’m now just getting around to posting photos.
Needless to say, I’ve been taking my sweet time. My last tank was an Aqueon 150 - not the greatest tank for a third-floor...
Hi @Randy Holmes-Farley
can you please advice if there is anything concerning on my DIY Aiptasia killing solution?
I have been using this recipe for around 4 years, without a problem, on my SPS dominated reef tanks and my experience is positive. However, I was wondering if it could be...
I have the Theiling Compact Rollermat on a new system I am setting up, and generally love it. However, the tank is going through it's ugly phase and I'm regularly cleaning glass/etc. which is using up the fleece at an incredible rate (about one roll a week)! At BRS it is $50 for 3 rolls, so that...
Hey all, Iv bin researching the AI hydra (non-HD) LEDs. I don't have a controller for them, but I do have an apex. Can anyone help me figure out how I can control these lights?
When I plug them in all the LEDs come on full power.
I'm currently on my 3rd week of dosing vodka to reduce nitrates in my tank, when I remember that I stumbled upon a couple of DIY NOPOX recipes that mix vodka, vinegar, and rodi water (sometimes). What are the benefits, if any, to dosing the DIY NOPOX vs the vodka I'm currently using?
I am considering making a few Frag racks to stick to the side of my tank(s). I read neodymiam were usable but shouldn't you coat them with something? If so, What?
I want magnets to hold for at least 1/2 inch glass.. what size neo's are suggested?
I’m all finished with my build and started cycling my tank. While the cycle is going I need to get my facade going. Can anyone help with some ideas on what they did. Also the tank is very quiet the only thing I hear is the skimmer and return pump, would the facade damp the noise down or would I...
I don't want to send the dryside to Echotech and pay 60$ for an extension. But the only place I can find these wires, sell them in bulks of hundreds of feet. Pricey to say the least.
I posted in the 'Looking to buy' forum (hoping someone has a busted dryside that i can steal the cable from)...
WTB
I want to extend the cable for my MP40, and I rather not pay 60$ to send it to Echotech for an extension. Does anyone have a busted Dryside sitting around? I'm not sure what it would cost me for shipping, but even just cutting the motor off would be fine by me lol
I'm having a heck of a...
Hey Everyone-
I can't seem to find a stand that fits the dimensions for my acrylic tank, so I'll be building my own wood stand for the first time. If you guys are familiar with "the king of DIY" on Youtube, I'm basically replicating his process of building it out of purely 2 x 4's. I plan on...
So it's come time to finally create this thread that I promised to do a while back. Been a member here on R2R for a while now but have only been lurking.
I currently have about a 220 litre system with the sump included in that. Display volume around 170 litres. It's a cube and my first ever...