Hello All! New to Reef2Reef. I currently have a 35 gallon set up but just got an acrylic 150 gallon that is 30"Hx24"Wx48"L. Will DIY my own 30 gallon sump and stand. Will be posting updates as I polish my acrylic and get it all set up. I am curious how you all would aquascape and what size...
Start of my first full SPS aquarium located bedside
My first experience with wood work doing my own stand for the still needs covers I plan on just painting some high end plywood adding trimming and holding it on with magnets.
My sump won’t be fitting under my stand (bad craftsmanship on my...
I just went to restart my tank after a few years out of the hobby and my protein skimmer pump isn’t pushing water. It’s an AQ 2000s. It hums but won’t actually push any water. Anyone got any ideas on if I can fix it or am I just better off buying a new one.
A word of warning
This is a pretty advanced DIY. You will need basic soldering skills, and reasonably good computer skills to pull this off. You also probably have to have built your own DIY LED's to make use of this. This is by no means plug and play. But if you are up to the challenge, by...
Hello All!
I spent a little bit of time trying to find a Wyze Cam mount that would work for an aquarium but no dice. After a bit of engineering I came up with this design. This mount hangs on the lip of any rimless aquarium and allows your camera to be flush to the glass without causing an...
I've started hatching brine shrimp and thinking of ways I could make a sustainable tank for them but have it be under my tank in the stand above the sump. Then I thought, what if I had it become part of the system. My sump came with an ATO tank that sits on top of the sump but I use an external...
Hello DIY team! I'm planning out how to plumb a few things for my new tank. I'm going to run the plumbing either through the floor into the crawl space, or through the wall down into the crawl space. I'm considering options and was interested in opinions on the way to proceed.
Automatic...
Going through my phones gallery, I noticed that I have built quite a few stands :D
Thought it would be nice to see what other people have been building lately for some future project inspiration! Here's a few I've completed (most of them for others)
Show us what you've built!
A Maple 35 Gal...
So I bought a new Red Sea reefer 170 a few months ago and I haven’t set it up yet. I am trying to decide on how to create a refugium in my sump and what set up I should go with. I have a piece of glass that I had cut to add into the sump to separate it. I just need some help to figure out which...
I’m finally upgrading my Innovative Marine 14 gallon peninsula. It’s been running for 3 years, so planning to break it down is a bit bittersweet. But, it’s time.
We’re moving on up to a 40 breeder with a 20 long sump! And a whole lot of diy. So far, I have built the stand, installed the Fiji...
Below is the story of how this build evolved into my dream tank and became the ultimate BioCube build.
I’ve always been attracted to nano’s. Historically, I have moved every 2-5 years so the thought of moving a large setup discouraged me from ever going big.
I purchased the BioCube 29 gallon...
Hello there! I'm Daan, and this is going to be my first reef build journal here. I've been in the freshwater hobby for over 15 years and recently decided to make the jump to saltwater.
Freshwater and aquascaping has always my main hobby and passion. Countless planted tanks have been setup and...
Greetings,
I’m new to R2R and wanted to share my recently finished Biocube 29 project. I’ve been modifying this tank for the past ten years.
This is version 5.0 and it features:
-Drilled Fiji Overflow
-Laser cut black Starboard bottom
-Radion 30 Gen 5 pro
-Bashsea Sump and 10g ATO reservoir...
Hello
I ordered a Aqua lifter pump to add to my overflow, and I just found out that it won’t be coming. I picked this pump because it was the only one that I have heard of being used the way I am trying to. I’m planning on using it to remove the air bubbles from my overflow and keep the siphon...
Hey all I gotta question to run past y’all. So I’m in the process of putting together a shopping list for a tank. I’ve made up my mind on adding a sump (a 10 gallon aquarium). I also want to run a predominately (or completely) biological/refugium filtration setup. However, I now have a decision...
Has anyone successfully set up a COR20 with a battery back up?
I've seen people talking about the icecap battery backup V2 with it's 24v output and transfer switch as a viable option to bad it's not around anymore.
but id imagine this could easily be done with two 12v batteries hooked up in...
So after 4 years of watching every YouTube video and reading every book I could find, I finally pulled the trigger and got a tank. It’s a a Deep Sea Aquatics 120gal. It’s 60”x20”x20”. Considering the tank is kind of divided by the center overflow, is it possible to create 2 different flow...
Hey everyone! I'm new around here, but not to saltwater. Ive had a few nano tanks in the past but unfortunately I didn't document them.
Oh well they weren't much to look at anyway. My goal with this tank is a somewhat low tech, peaceful mixed reef with a few fish and inverts.
To start off I...
Since I have automatic water changes set up, the water it takes to vaccum out the sand seems like such a waste. Plus I have to make sure I have enough mixed salt water ready to replace what im going to suck up. If I don't then I have to wait 24 hours. Simply put, it's a hassle. Seems like a no...
So I have a 10g half moon tank and it came with a lid, it was a used tank so I just made do and thought it was good enough. However today one of my clownfish decided to abandon ship and squeeze out through a small opening in the lid so I want to invest in a mesh top since I’ve lost 3 clowns now...
Looking for glass lids, the tank does not have a center brace, can’t seem to find fitting lids for 71 in L X 17 in W
Finding only lids for tanks with center brace. I have searched for a set of 3 pieces but no luck. As the ones I have currently are a set of 3. Consisting of 2 panels for each...
Hey Guys,
I am working on a project that can measure how much dissolved co2 is in my aquarium. I have overcome a few of the major obstacles, but I have hit a bit of a wall.
Has anyone done this? I am using henry's law to figure it out, if that means anything to anyone here.
My current problem...
Aquarium Inventions
@Jay Hemdal C.2006
This article discusses aquarium inventions, a bit of history and future thoughts. It is offered just as a way to get DIYers thinking about expanding on their ideas. Includes an interview with John Kuhns, the person who invented Novaqua and Amquel. A...
I have been working on what originally was a 40 gallon breeder sump conversion for the last 2 months or so, and I am looking for constructive feedback. In the works is an entire sump build customizable in design and color (I have Blue, Green, Orange, Yellow, Red, and Purple) This current one for...