diy

I have been working on this 40 gallon breeder sump conversion for the last week or so, and I am looking for constructive feedback. In the works is piping, along with a fluorescent dowel plan to make the sump baffles glow once a UV led strip is installed in cabinet! Going Orange Section 40 with...

I bought a 29 gallon tank a few months back for a QT tank. I had it up for awhile on a bare bones 2x4 frame. It only took a week or two to decide I need shelving to hold the tank stuff in. However, during this time I had to replace half my fence and I had about a dozen left over cedar pickets...

So I have been reading about CO2 scrubbers and since I use them in the course of my work, I thought I would make a few improvements on the current design and document them here. This time of year, people are indoors more and this can have an adverse affect on our water quality. An increase in...

So my issue is i am running MH’s i want to add some more blue and pop, the second part of my issue is i want to run 3 light bars or 1 larger light bar on each side (48” in length). The only issue i have is it seems every manufacturer requires a inverter per light bar, is their a way to...

Hi Guys, new to R2R, but a long time lurker. I have been using this overflow for about 2 years now with no trouble, so I figured it was time to show it off! It will overflow about 2-300gph to my sump, and will automatically start and stop when the water level rises above the baffle just before...

Hi to all, All of us know the importance of maintaining the stability of water parameters for the SPS reef tank. Mankind is lazy, it is also known :). So, to break the vicious circle I decided to make a poor man titrator and peristaltic dispenser to regulate the solution B added volume and keep...

Hey everyone, I am working on a diy ph-prob for a reef-pi unit. According to the online guide I need a barrel adaptor and some kind of ph-circuit. By the looks of it, this has both built in, but I have never made one of these before. Can someone tell me if this will connect to my Raspberry-pi...

So I just completed my first/second reseal job on a 55 gal future sump tank. The first time I did it I attempted the finger method to smooth the seal and it looked terrible. I restripped, retapped, and resealed using a caulking tool on the 10 side (I suppose 10mm?). I’m on day 4 of leak test. so...

Whats Up Reefers, I Decided To Start A Thread To Record My Progress On My New Journey. In The Past I've Had Many Different Size Tanks From A 33 Long Up To 120 Gal. Do to Relocating And 1 Year Off From The Hobby I Finally Decided To Start Fresh Once Again. As You Will See, I Might Do...

Hey all, Planning a 170 gallon rimless peninsula build. An upgrade from my 90 gallon aqueon. Ordering glass soon, I've used some calculators available online but looking for more advice before ordering. With dimensions at 72Lx30Wx18H I am planning 1/2 glass. Which gives me a safety...

Hello all! A customer of mine is building a tank into a wall. I ordered him 2 hydra 64hds but they are out of mounting kits and im horrible with coming up with diy set ups. I can however follow instructions very well. Can you guys please bounce some ideas off of me for mounting set ups? Water...

I need any opinions and tips on the what to watch for during the process as well as types of silicone. Tank is a bottom drilled typical dimensions with corner overflow. I planned to just reseal but the previous owner started the process then abandoned. So I think it’s best to completely tear...

Hi everyone, I have an led strip for lighting and I wanted to mount it above my tank. However, I am not looking to drill any holes in the wall (just remodeled the room) and I want to be able to secure it on the rim of my tank. Please send ideas to help me create something like the picture below.

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

Would like to hear your thoughts on the effects of internal pump vibration on corals. Recently plumbed an external DIY filter using a power head and it caused corals to Immediately close. (Already went through the steps to find the issue) after much experimentation with flow rates, different...

Ok, so I have a tiny 10 gallon aquarium that I previously used for freshwater, but decided that it might make a decent frag tank. My main system is 75 gallons with a 15 gallon sump and my original idea was just to have the 10 next to the 75 with a siphon going from my main tank to the 10 and...

Is epoxy resin safe in our aquariums? Is there a certain brand or type that is safe? I see a lot of cool resin projects done. It would be interesting to know if we could use this inside of our aquariums safely.

Prepare yourself for a rather long first post. This thread is going to document all of the tanks I have in my fish room. Which should be a relatively simple task, but I recently broke my own 2 tank limit. So now there is four of them. I have no idea how this happened. 40 Breeder Display...

I made this for my IM 20 gallon reef tank. All the plumbing is internal besides the incoming and outgoing from the bottom. Comes in from the main recirculating pump in the sump and goes out from the 2 exit ports into the display.

So I decided to redo my tank and it’s plumbing. I also decided I want to make it rimless. So I did. And while I went on a search on the best way to get rid of the silicone residue, I kept reading that it’s not a good idea to do rimless. Kind of too late now.... it’s a standard 55 gallon so the...

Anyone have experience building these? Planning on making a floating island for the fast growing soft corals (GSP and Xenia). I've seen a couple threads but they dont go too far into the setup. From what I have seen you need rare earth magnets. Curious how to make them so they don't scratch...

Made my own floating canopy for above my Nuvo 150. Light just sits on the top. It's bigger than most I've seen. Wanted to make it big enough to cover light spread but also needed it up higher so can access tank.

So I ordered 3 of these off Amazon. They worked well, and I saw many threads about replacing some of the leds with more desirable wavelengths as well as removing the lenses. Well, turns out it looks like they have updated their board and use some sort of LED chip that is attached to the lens. (...

Hey all, figured i’d start a thread and see where it goes. Been in the hobby as a whole for about 5 years now. Had a 40 breeder for about 2 years when i still lived at home. I still miss that tank. Being my first full reef, it taught me everything i know about this hobby, along with a lot of...

I have a water hookup T'd off to two RO systems. I'm looking for help troubleshooting a loud, intermitten vibration problem and advice on how to merge the two systems together, if possible. I suspect they're fighting against each other since they're connected to the same household connection...