Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How to perform a freshwater dip
Freshwater dips are a very important diagnostic tool when you have a sick fish. Since it can help flush out the excess mucus that can and does build up in the gills with a parasite infestation, it can be lifesaving as well. It will even confirm a flukes infestation. It’s important to know how to perform a freshwater dip since so much can be gained from it. We are going to go through the steps here together.
Equipment:
· A container that holds water and is large enough for the fish in question to fit inside easily. It’s preferable to have a dark colored container to make finding flukes easier.
· Air pump, Air stone and tubing.
· RODI water (you can buffer the water with a splash of tank water)
· Net & Heater
· Cell phone, timer, stop watch, clock – something to keep track of the time.
These are all common things and I’m sure most of us have them laying around already.
Directions:
· Fill your chosen container with RODI water and start heating it to match the tank the “patient” is coming from.
· Place an air stone in the container to start aerating the water.
· Catch the patient.
· Check that the temperature matches between the container and the tank. You can check the PH of both and if they are wildly different, use a splash to tank water to buffer the dip water a bit.
· Place the patient in the freshwater and start the timer for 5 minutes.
· Keep a close watch on the fish while the dip is in progress. If he starts thrashing about, it’s probably a good time to remove him from the dip early.
· When the 5 minutes is up, remove the fish and replace him either in the tank he came from or into a QT.
When you’re done, don’t get rid of the water yet! The first thing you will do is look closely at the water the fish was just in. If flukes are found, you’ll see opaque circles or ovals in the bottom of the bowl. If the bowl is clear, then flukes can be ruled out and other parasites or maladies can be considered. Take a look at the fish you just got done dipping. It’s possible that the fish is now breathing easier, a bit more alert, or just resting from the treatment.
For additional info on Freshwater Dips see Humblefish's write up here: Freshwater Dip
I’ve never had a problem performing a fresh water dip on a fish. I’ve done hundreds and only lost a hand-full of fish. I’ve found that if a fish doesn’t survive the freshwater dip, he was likely past saving anyway. That sounds harsh, but it’s likely true. Here is a video of how I perform a freshwater dip.
Special thanks to my coworker Sonia for being my camera-woman and to the customer to waited that last minute patiently so we could finish the dip and the video.
How to perform a freshwater dip
Freshwater dips are a very important diagnostic tool when you have a sick fish. Since it can help flush out the excess mucus that can and does build up in the gills with a parasite infestation, it can be lifesaving as well. It will even confirm a flukes infestation. It’s important to know how to perform a freshwater dip since so much can be gained from it. We are going to go through the steps here together.
Equipment:
· A container that holds water and is large enough for the fish in question to fit inside easily. It’s preferable to have a dark colored container to make finding flukes easier.
· Air pump, Air stone and tubing.
· RODI water (you can buffer the water with a splash of tank water)
· Net & Heater
· Cell phone, timer, stop watch, clock – something to keep track of the time.
These are all common things and I’m sure most of us have them laying around already.
Directions:
· Fill your chosen container with RODI water and start heating it to match the tank the “patient” is coming from.
· Place an air stone in the container to start aerating the water.
· Catch the patient.
· Check that the temperature matches between the container and the tank. You can check the PH of both and if they are wildly different, use a splash to tank water to buffer the dip water a bit.
· Place the patient in the freshwater and start the timer for 5 minutes.
· Keep a close watch on the fish while the dip is in progress. If he starts thrashing about, it’s probably a good time to remove him from the dip early.
· When the 5 minutes is up, remove the fish and replace him either in the tank he came from or into a QT.
When you’re done, don’t get rid of the water yet! The first thing you will do is look closely at the water the fish was just in. If flukes are found, you’ll see opaque circles or ovals in the bottom of the bowl. If the bowl is clear, then flukes can be ruled out and other parasites or maladies can be considered. Take a look at the fish you just got done dipping. It’s possible that the fish is now breathing easier, a bit more alert, or just resting from the treatment.
For additional info on Freshwater Dips see Humblefish's write up here: Freshwater Dip
I’ve never had a problem performing a fresh water dip on a fish. I’ve done hundreds and only lost a hand-full of fish. I’ve found that if a fish doesn’t survive the freshwater dip, he was likely past saving anyway. That sounds harsh, but it’s likely true. Here is a video of how I perform a freshwater dip.
Special thanks to my coworker Sonia for being my camera-woman and to the customer to waited that last minute patiently so we could finish the dip and the video.
My thoughts exactly. If I'd sen a fish lay on its side, that quick, it would have been out of there in about 10 seconds lol! Now I know better.Great video. It was interesting that the fish did the dramatic death routine but towards the end of the dip seemed to have settled down. Seeing the video is good because now I am prepared for such behavior. Had I not seen it, that sort of thing would have been alarming.
I don't think my Harlequin Tuskfish will be able to tolerate the dip. When I was running hypo in the display tank, he was having a very hard time at 1.013 while all the other fish, even other Wrasses, were fine.
Some fish who cannot tolerate long-term exposure to hypo conditions can still handle a 5 min FW dip just fine. However, I've run into a few cases where the fish appears unable to maintain their equilibrium once returned to SW. If this happens, hold the fish upright (using latex, nitrile or rubber gloves), and gently glide him through the water (to get saltwater flowing through the gills again). It is also a good idea to place the fish in an acclimation box until he appears “normal”.
Will this treat icks on Any fish?...
So anyway, I did the dip on him and when I put him back his slime coat was all raggedy looking.
I suspected my tang had flukes, so I did a freshwater dip and this is the result (looks like flukes from what I can tell).
Now, at first I thought this was strange because I treated with PraziPro while in QT. But then I remembered I added some snails and a shrimp before I realized I should QT them. The infection doesn't seem terribly bad, no real visible signs other then a little heavy breathing and a saw her scratch against the rock a couple times. She's the only one in the tank currently, but theres been cross contamination from my other tank where I have 3 fish that I planned on relocating today. I would prefer to move them all over to the new tank and treat with PraziPro all together. From what I've read I believe PraziPro is reef safe, but I wasn't sure if it would be ok with inverts, particularly a cleaner shrimp, various snails and a pincushion urchin. Would that be an okay plan of action? or do I need to QT everyone and leave the tank fallow for 76 days?
@Humblefish @melypr1985
Thanks
Just one problem. I don't see anything in this picture that looks like flukes to me.
I've never seen flukes before so when I saw these white things flying around after I took the tang out after the dip I assumed they were flukes (I think most of those other white things are air bubbles). But I suppose not? I certainly would not be upset if I misidentified, it's part of the reason I posted here to begin with.