Tank not leveled ?

zusima

Valuable Member
View Badges
Joined
Dec 23, 2023
Messages
1,128
Reaction score
1,039
Location
Holliston
Rating - 0%
0   0   0
Not to beat a dead horse but carpet changes things a tad. Use a 3' level and check each rim or measure your water line with all pumps off. Write down each direction the tank is off in..example the left front is 1/4 lower than the front right in Pic. Check all 4 then drain to exceptable level..use carpet skids or shims that are the thickness off you wrote down. 1/4 under left leg. Don't go by the level at this point as when you refill with water the weight will compress your carpet and foam underlayment and then possibly be off again hence your measuring when full. Make sense?
 

hsp

Active Member
View Badges
Joined
Dec 15, 2023
Messages
105
Reaction score
39
Location
Sydney, Australia
Rating - 0%
0   0   0
And put the shims between the tank legs and carpet? Correct ?
Could you also use the levelling feet on the Red Sea to adjust later?

Here are the pics from the manual:

Screenshot 2024-10-12 at 17.19.31.png


Screenshot 2024-10-12 at 17.20.31.png


Screenshot 2024-10-12 at 17.21.08.png


Screenshot 2024-10-12 at 17.22.03.png
 
Back
Top