Hello Everyone!
I am moving off to college, so sadly I have to sell off all of my aquarium equipment. I have already cleared out all of the livestock, and deep cleaned all of the equipment, so now I just need to sell it. Everything works great unless otherwise noted. Below is what I have available (prices are negotiable OBO):
Hanna Instruments Marine Alkalinity Checker HI772 ($35):
Includes Alkalinity colorimeter, 2 x 10ml cuvettes, 1.0ml syringe with tip, Instruction Manual, Quick Reference Guide, and carrying case. Note: no reagent will be included, as it is open/past its expiry date.
Hanna Instruments Marine Phosphate Ultra-Low-Range Checker HI774 ($40):
Includes Phosphate ULR Colorimeter, 2 x 10ml cuvettes (1 is missing lid, but you only need 1 to use the tester), 24 Reagents (Expired 3/2023, but sealed, and based on what I've seen/read, the phosphate ones stay good as they are individually sealed), Instruction Manual, Quick Reference Guide, and Carrying Case.
MagTool MT-360P Auto Top Off ($25):
Includes Pump, Sensor, Power Supply, Tubing, Check Valve, Tubing clamp (to hold tube onto tank), and instruction manual. (All you need is a bucket/reservoir for the freshwater)
EcoTech Marine Vectra M1 ($160):
Includes Pump, Power Supply, Controller, and Barb Fitting for Attaching Flexible Tubing to the Outlet
Bubble Magus C3.5 Protein Skimmer ($70) :
Includes Protein Skimmer and all associated parts. Note: When I got it, one of the feet/legs broke at the glue joint. I glued it back on (and put some glue on the other side for good measure), and it has worked great for the last 3 years. If shipping is rough, it may need to be glued back on, but once in the tank, there is basically no force on it.
40 Gallon Breeder Tank with Lid, Stand and Facade ($160):
Tank is ~ 4 Years old, has never leaked. Stand is home built (using plans online), and is pretty overengineered, never had any problems. Facade looks nice, could maybe use a new coat of paint. The facade has a part that goes on top of the tank, and 3 panels that go on the stand (back is open, along with one of the sides for easy access/control of equipment). This can not be shipped, I am near Dunedin/Clearwater Florida.
~13 Gallon Sump with ~2.5 Gallons of Bio Balls ($50):
Custom Acrylic Sump with Filter Pad Holder, Bio Ball/Bio Media Chamber, Open Space for Return Pump/Protein Skimmer. Has worked great so far with no leaks. This can not be shipped, I am near Dunedin/Clearwater Florida.
Comment what you would want to buy/your zip code and I can figure out shipping prices. I can send photos of anything you want, just leave a comment!
Thanks for looking!
I am moving off to college, so sadly I have to sell off all of my aquarium equipment. I have already cleared out all of the livestock, and deep cleaned all of the equipment, so now I just need to sell it. Everything works great unless otherwise noted. Below is what I have available (prices are negotiable OBO):
Hanna Instruments Marine Alkalinity Checker HI772 ($35):
Includes Alkalinity colorimeter, 2 x 10ml cuvettes, 1.0ml syringe with tip, Instruction Manual, Quick Reference Guide, and carrying case. Note: no reagent will be included, as it is open/past its expiry date.
Hanna Instruments Marine Phosphate Ultra-Low-Range Checker HI774 ($40):
Includes Phosphate ULR Colorimeter, 2 x 10ml cuvettes (1 is missing lid, but you only need 1 to use the tester), 24 Reagents (Expired 3/2023, but sealed, and based on what I've seen/read, the phosphate ones stay good as they are individually sealed), Instruction Manual, Quick Reference Guide, and Carrying Case.
MagTool MT-360P Auto Top Off ($25):
Includes Pump, Sensor, Power Supply, Tubing, Check Valve, Tubing clamp (to hold tube onto tank), and instruction manual. (All you need is a bucket/reservoir for the freshwater)
EcoTech Marine Vectra M1 ($160):
Includes Pump, Power Supply, Controller, and Barb Fitting for Attaching Flexible Tubing to the Outlet
Bubble Magus C3.5 Protein Skimmer ($70) :
Includes Protein Skimmer and all associated parts. Note: When I got it, one of the feet/legs broke at the glue joint. I glued it back on (and put some glue on the other side for good measure), and it has worked great for the last 3 years. If shipping is rough, it may need to be glued back on, but once in the tank, there is basically no force on it.
40 Gallon Breeder Tank with Lid, Stand and Facade ($160):
Tank is ~ 4 Years old, has never leaked. Stand is home built (using plans online), and is pretty overengineered, never had any problems. Facade looks nice, could maybe use a new coat of paint. The facade has a part that goes on top of the tank, and 3 panels that go on the stand (back is open, along with one of the sides for easy access/control of equipment). This can not be shipped, I am near Dunedin/Clearwater Florida.
~13 Gallon Sump with ~2.5 Gallons of Bio Balls ($50):
Custom Acrylic Sump with Filter Pad Holder, Bio Ball/Bio Media Chamber, Open Space for Return Pump/Protein Skimmer. Has worked great so far with no leaks. This can not be shipped, I am near Dunedin/Clearwater Florida.
Comment what you would want to buy/your zip code and I can figure out shipping prices. I can send photos of anything you want, just leave a comment!
Thanks for looking!
