Sicce Syncra SDC 6 wifi connection issue

Slevin007 · Mar 15, 2023

Hello all

I’ve written @Jay Wilson- SICCE but figured I’d also ask the group while I wait to hear back. I know he is busy.

I have a Syncra SDC 6 that has been working flawlessly. Today I turned it off via the Apex fusion app and when I turned it back on it said the wifi was disconnected. I’ve tried every conceivable way to get it back but nothing works. I’ve reset the wifi/reset the controller/deleted the controller from the app/ deleted the app/ I can add it when I log into the Conrol app but when it comes to the wifi connection it repeatedly says setup error. I’ve reset routers/ changed passwords/ everything and yes it’s on a 2.4 ghz network. Any help is seriously appreciated

thank you in advance.

blaxsun · Mar 16, 2023

Did you add it via IOTA to the Apex? (if controlling through IOTA you can't also use the ContrAll app).

Slevin007 · Mar 16, 2023

Got a reply from Customer Service. They verified it was a server issue and all is back to normal on their end.

Slevin007 · Mar 16, 2023

blaxsun said:
Did you add it via IOTA to the Apex? (if controlling through IOTA you can't also use the ContrAll app).

I actually didn’t realize that so I appreciate the heads up. I wasn’t using it on the IOTA part just as a hot switch.

blaxsun · Mar 16, 2023

Slevin007 said:
I actually didn’t realize that so I appreciate the heads up. I wasn’t using it on the IOTA part just as a hot switch.

Definitely set it up via IOTA if you have a chance! This allows you to control the pump speed through the Apex so you can throttle it down for feedings, etc. Note that when you add the pump you get two outlets: one is the IOTA virtual outlet (WiFi) and the other is the actual power outlet.

This is how I have mine configured for my Sicce SDC 6.0:

This is the power outlet on the Apex
Fallback ON
Set ON
If FeedA 000 Then 45
If FeedB 000 Then 45
If FeedC 000 Then 25
If FeedD 000 Then OFF

This is the IOTA virtual outlet (click on the gear to open, the gear in the upper right corner and then the advanced tab)
If FeedA 000 Then 45
If FeedB 000 Then 45
If FeedC 000 Then 25
If FeedD 000 Then OFF

You have to configure it in both locations - otherwise it doesn't throttle up/down properly. Then just program the schedule you want (I have mine fixed @60%). Good luck!

Slevin007 · Mar 16, 2023

blaxsun said:
Definitely set it up via IOTA if you have a chance! This allows you to control the pump speed through the Apex so you can throttle it down for feedings, etc. Note that when you add the pump you get two outlets: one is the IOTA virtual outlet (WiFi) and the other is the actual power outlet.

This is how I have mine configured for my Sicce SDC 6.0:

This is the power outlet on the Apex
Fallback ON
Set ON
If FeedA 000 Then 45
If FeedB 000 Then 45
If FeedC 000 Then 25
If FeedD 000 Then OFF

This is the IOTA virtual outlet (click on the gear to open, the gear in the upper right corner and then the advanced tab)
If FeedA 000 Then 45
If FeedB 000 Then 45
If FeedC 000 Then 25
If FeedD 000 Then OFF

You have to configure it in both locations - otherwise it doesn't throttle up/down properly. Then just program the schedule you want (I have mine fixed @60%). Good luck!

This is awesome thank you so much for all of this. Will do it now