- Joined
- Nov 29, 2018
- Messages
- 1,308
- Reaction score
- 1,178
I don’t like the yellow look of 6500K , but I would bet they grow coral like weeds .
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Not so much. We used to insist that the color temperature closest to the noon sun must be the best. Much experimentation has been done in the past 15 years to show the benefits of a more blue-violet spectrum on coral photosynthesis. I found an old article by Dana Riddle here: https://reefs.com/magazine/the-best-lamp-is/ which showed a better growth rate at higher Kelvin temps, with the exception of the 10,000K bulb used. He postulated that the amount of red light from the 10,000K bulb could be a factor in hindering coral growth. Still, the bulk of reefers nowadays seem to favor the bluer hues for growth, health, and pigmentation.I don’t like the yellow look of 6500K , but I would bet they grow coral like weeds
There is a tendency to assume that the blue light for the photosynthesis is everything we need for the coral metabolism to reflect in optimal growth, pigment formation and general health, while the fact is that under lower kelvin bulbs we practically notice faster growth and more diversity of pigment formation. In the ocean is the same thing. Coral farms under the sun have the very best corals produced!Not so much. We used to insist that the color temperature closest to the noon sun must be the best. Much experimentation has been done in the past 15 years to show the benefits of a more blue-violet spectrum on coral photosynthesis. I found an old article by Dana Riddle here: https://reefs.com/magazine/the-best-lamp-is/ which showed a better growth rate at higher Kelvin temps, with the exception of the 10,000K bulb used. He postulated that the amount of red light from the 10,000K bulb could be a factor in hindering coral growth. Still, the bulk of reefers nowadays seem to favor the bluer hues for growth, health, and pigmentation.
I ran MH for 10 years. Once I went to LED the problems started.I still prefer MH but due to a variety of issues mostly related to electric and heat I went to Kessils then G5's. If nothing else maybe this will finally end the decade+ long argument of MH vs. LED . On a positive note, I was talking to Champion at RAP and it was mentioned they still have a good supply of MH bulbs which I got the impression they were trying to get rid of.
Too many unsupported claims to address. I'll just address the last paragraph. I seriously doubt that higher Kelvin bulbs (above 10,000K) were available for use in the 90's. Second, Dana didn't have a coral farm in Hawaii. Third, name the "best coral farmers" who are using low Kelvin lighting today. I know that you aren't growing stony corals in Hawaii, so what personal experience can you point to? I've use halides ranging from very low Kelvin through 20,000K. I had much better coloration with the higher Kelvin bulbs. The low Kelvin bulbs promoted algae growth. Right now I'm growing beautiful corals under nothing but blue, royal blue, and violet/UV light.There is a tendency to assume that the blue light for the photosynthesis is everything we need for the coral metabolism to reflect in optimal growth, pigment formation and general health, while the fact is that under lower kelvin bulbs we practically notice faster growth and more diversity of pigment formation. In the ocean is the same thing. Coral farms under the sun have the very best corals produced!
Every coral will respond to light in a different way and each species should be taken in consideration as we know. That is another aspect many tend to ignore while comparing light for corals. Practically we will see faster growth in the majority of the shallow water corals, anemones and zoanthids when under lower kelvin bulbs, no doubt about that. The intensity and duration needs to be taken in consideration for each particular comparison and proper application.
The paper suggested is a great example of an experiment using isolated wavelength to prove a point (see also Riddle, D., 2004. PAM fluorometer experiments: Part I. Effects of metal halide lamp spectral qualities on zooxanthellae photosynthesis in photoacclimated Fungia corals: The red light theory. Part II. Effects of water motion on zooxanthellae photosynthesis.)
In reality it proves that red light, when used alone, is in fact way too effective for photosynthesis, and excess of oxidation occurs because of the application. Photoinhibition happened due to the strong emission of red light alone in a short distance. That doesn't happen in the aquarium with adequate distribution using the right wattage of halide. If it normally doesn't occur when using a 6500K 250W halide at 12 inches from a coral, with well distributed light from a parabolic reflector, it proves that the application is what matters. If doesn't happen in 12" deep tide pools under tropical sunlight over those shallow water coral species found in those pools, it shouldn't be a problem.
Dana used 6500K halides over his coral farm in the 90's because he knew they were the best bulbs to grow those corals. The best coral farmers will tell you the same today. The best bulb to grow corals is the 6500K metal halide. Or the sun.
I'd like to see where he said that. Coral farming in Hawaii is forbidden.Riddle has said that they had massive growth under 6500k when he was a coral farmer
You have me there. I've only been at it since around 1998. I've been through the complete spectrum of lighting--PC fluorescents, daylight halides, VHO actinics, high Kelvin halides, was among the first to DIY LEDs, experimented with pure blues to prove a single, narrow region of blue could successfully grow SPS, and have decided, based on my personal experience, that the blue-violet spectrum has way too many benefits, with no discernable downside. I only turn on whites when I need to clean the glass.When I started reefing in 1992, you could buy MH out of the back of TFH Magazine with 5500k or 6500k bulbs that came in the kit - fact. Also, Adam at Battlecorals uses 6500k bulbs at least until his stock runs out... he has posted about this a lot.
Enlighten me.Are you serious? He has not always lived in Hawaii. He doesn't live there now either. He has bios online that you can find. If you don't want to do your homework, then I/we can educate you, but how about you lay off people for making similar mistakes and focus on the point at hand?
Or see something inside, rightI only turn on whites when I need to clean the glass.
Maybe if I dropped a magnet or scraper. Seriously, the blue-violet region is all I ever use. It wasn't too bad when I was using 14,000K halides, but the pop is even better now.Or see something inside, right
The point at hand is that a major supplier of high Kelvin halides is ceasing production. Fortunately, there are alternatives in T-5 and LED....focus on the point at hand?
I almost forgot--I tried plasma for a while. Not energy efficient. It ended up being a little faddish.You have me there. I've only been at it since around 1998. I've been through the complete spectrum of lighting--PC fluorescents, daylight halides, VHO actinics, high Kelvin halides, was among the first to DIY LEDs, experimented with pure blues to prove a single, narrow region of blue could successfully grow SPS, and have decided, based on my personal experience, that the blue-violet spectrum has way too many benefits, with no discernable downside. I only turn on whites when I need to clean the glass.
If you could not grow and color coral well with 6500k halides, then you were not talented enough. You might not like the way that some of them look, but for growth and rendering actual color, they are almost like a cheat code. They cannot make ugly corals look good. You should have had wonderful yellows, pink and blues under 6500k lights. The best looking coral are still from full daylight and then blued-up to your liking - ask anybody who has gotten a BattleBox... the color fades in time without the daylight, but they look great at first.
Either you did not actually use 6500k bulbs, or you did not have the skill to get good results. Nobody who has had both ever had said that they sucked and did not work... only that they moved on for other reasons like looks or heat or something. They were hot and they did drive changes to future generations of MH bulbs which are considerably less hot (except for Radium, IME).
I personally found 14k to be a good blend of output and color along with the crisp white look that is neither yellow nor windex. I do use 6500k t5 in some frag tanks and the colors and growth in there are amazing too... these frags shine when you put them under 14k even more than the frags grown under 14k, but I live with that for the crisp white look that I described above.
If you could not grow and color coral well with 6500k halides, then you were not talented enough.
Wow, kind of prickly.Either you did not actually use 6500k bulbs, or you did not have the skill to get good results.