OSC Code for Kalk Stirrer

[CoralNerd]

I have the stirrer set to stir 30 seconds every 3 hours.
I'm trying to avoid the stirrer noise from midnight till 7am but I want to slip in a 30 sec 7am stir and I can't figure this out.

Kalk stirrer program I have now
Fallback OFF
Set OFF
If Time 03:00 to 06:05 Then OFF
OSC 000:00/000:30/179:30 Then ON
If Output KalkOSC = ON Then ON

I created a virtual outlet trying figure this out
Virtual outlet called KalkOSC
Set OFF
Fallback OFF
If Time 01:00 to 06:58 Then OFF
OSC 000:00/000:30/059:30 Then ON
If Time 07:05 to 24:00 Then OFF

 

[Reefing Madness]

 

[SpyC]

I can't directly offer help, but it may be easier to let it stir for a minute using
If time 07:00 to 07:01 then on.

 

[Sisterlimonpot]

Fallback OFF
OSC 000:00/000:30/179:30 Then ON
If Time 03:00 to 06:05 Then OFF

 

[CoralNerd]

I got the answer on neptune

Fallback OFF
OSC 000:00/000:30/179:30 Then ON
If Time 000:00 to 06:59 Then OFF
If Output KalkOSC = ON Then ON

Now for the virtual outlet to get the extra stir at 7am. I would do it this way.

Set OFF
If Time 06:59 to 07:00 Then ON
Defer 001:30 Then ON

 

[Sisterlimonpot]

I got the answer on neptune

Fallback OFF
OSC 000:00/000:30/179:30 Then ON
If Time 000:00 to 06:59 Then OFF
If Output KalkOSC = ON Then ON

Now for the virtual outlet to get the extra stir at 7am. I would do it this way.

Set OFF
If Time 06:59 to 07:00 Then ON
Defer 001:30 Then ON

That's a clever way to get 30 seconds at 0700.

I don't think you'll need a VO because the 1st section of the OSC sets the time of the hour for it to start. Having it all zeros means that it will start at X:00. And the way you have the TIME OFF statement means that it will start at 0700.

if you use his example of code with the times in the TIME OFF statement you will need a VO.

EDIT: looking closer at his code, you don't need a VO either.

The only thing you had wrong was the order, and not needing the SET OFF line.