Noopsyche K7 Pro II - Crimson's Review and Growth Thread
- Thread starter Crimsonvice
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)
Here’s a link to the manual.
Operating Instructions
Noopsyche K7 Operating Instructions First we want to thank you for your purchase of the most affordable quality light on the market today. In the next few minutes we will have your new light ready to grow coral by following a few simple steps. The first thing we must do is familiarize our self...
noopsycheusa.store
Here’s a link to the manual.
Operating Instructions
Noopsyche K7 Operating Instructions First we want to thank you for your purchase of the most affordable quality light on the market today. In the next few minutes we will have your new light ready to grow coral by following a few simple steps. The first thing we must do is familiarize our self...noopsycheusa.store
Thank you!
You’re welcome
John Grover
New Member
- Joined
- May 2, 2020
- Messages
- 2
- Reaction score
- 0
I have a 50 gal tank with a 1 1/2” wood lip, please see photo, would I be able to mount one of these to my tank?
John Grover
New Member
- Joined
- May 2, 2020
- Messages
- 2
- Reaction score
- 0
I am just showing the top area of my tank since I am just getting set up.
OP
OP
Crimsonvice
Valuable Member
I was able to fit it on my casing which was an 1.5". I did need to use spacers though to get the mounts to fit.I have a 50 gal tank with a 1 1/2” wood lip, please see photo, would I be able to mount one of these to my tank?
The edges may not get enough light and appear dark. The 18 inches wide would be just fine though. As usual I'd say mount them as high as you can.
CherBear811
Active Member
So with the remote you can program each channel to auto ramp the intensity you want at the ramp time you want? Also, how many times per day can each channel be programmed?
There are 7 time slots, so if you put 10am in a time slot, with white at 20%, then the next slot is 12pm and white at 50%, it will ramp up that 30% over the 2 hour time period
To keep the light at a constant level for say the next 4 hours- the 12pm and 4pm time slots will have whites at 50%, so the intensity doesn’t move
CherBear811
Active Member
I notice in the manual, it says under operation.... "Do not operate near any large magnets". I wonder if this caused an issue with the guy who kept losing programming? Many of us have strong magnets holding powerheads... how far from the light do we need to make sure the magnets are in order to ensure it doesn't cause a problem with programming?
CherBear811
Active Member
Thanks for the reply! So you can program up to 7 times for each channel through out the day and it will ramp over the time in between the settings to the desired intensity or hold it if you program the same intensity, etc?
Really nice looking! I think you have just as much spread and coverage if not more than using the t'5s! They are really nice looking to .I love the mounts! How has growth been?and have you had any problems? My biggest concern with these lights is support after purchase. Is there a local or a US supplier? A us phone number or would any correspondence have to be done through email and sent to china for repair. If so that would probably be a deal breaker! I am in the market for lights and I saw some great bargains on ali expree all using cree leds but all based in China an noway to call even. The phone number are long and start with a plus symbol!
ridgeburyreefer
Active Member
Wow, just when I thought I’d settled on AI hydras..... this seals the deal, I’m gonna be a nooper
48x18x24 90 gallon, what would you recommend for a setup? Are you aware of any multi light mounts?
48x18x24 90 gallon, what would you recommend for a setup? Are you aware of any multi light mounts?
You could get away with 2. That's what I had on my 48x18x21 75 until I recently added a third. I would go for either 2 or 4 though but that's just preference. The noopsyche t5 hybrid fixture has capacity to mount several of the LEDs, otherwise I'm sure there's DIY rail kits you could throw together to get what you need.
This is what I ended up doing after trying several other configurations. I wanted to keep a mixed reef including SPS and 2 wasn't enough for my 48"
www.reef2reef.com
Red Sea Pendant 90 system + Noopsyche lights + Fans!
So I have gone through several iterations of this set up because it just didn't look quite right.... until now!! I have a RSR 350. A canopy defeated the purpose of getting a rimless tank. I tried the arm mounts for a bit but was annoyed with how I had to build out the tank lid. Finally I was...
www.reef2reef.com
Bj’s Reef
Valuable Member
You won’t regret getting these lights. I have used them for over a year with out any problems. Some people complain about the controller. I think it’s because most people are familiar with a touch screen.However once you set the lights up. You will probably not mess with the lights much. At least that has been my experience.
Similar threads
