Najer's zen twins.
- Build Thread
- Thread starter najer
- Start date
- Tagged users najer
- Status
najer
Valuable Member
najer
Valuable Member
The palys are on the end of a two foot plus branch rock they got moved aside today to allow the new power head location, time to stir this up a bit!
najer
Valuable Member
Cbb and Naoko are fine.
The scopas scopas has a scuff on top of it's head and a split tail!
They have been "frisky" for a couple of months, hopefully just a lovers' tiff!
Quick snap of the other clowns.
The scopas scopas has a scuff on top of it's head and a split tail!
They have been "frisky" for a couple of months, hopefully just a lovers' tiff!
Quick snap of the other clowns.
najer
Valuable Member
Ok I might have done the start of the re-scape last night after a few adult beverages and stuff!
I have been planning this for ages but couldn't do it until I found the right wave maker, Octo pulse 2!
So far it has been great and is silent set on random, I had to get it in the right spot on the divide so the arch had to come down for a bit hence the palys in the middle.
You can see the pulse where it is aimed.
I can now rebuild working around that pulse and I am still working on the new spraybar which should really stir things up.
I have been planning this for ages but couldn't do it until I found the right wave maker, Octo pulse 2!
So far it has been great and is silent set on random, I had to get it in the right spot on the divide so the arch had to come down for a bit hence the palys in the middle.
You can see the pulse where it is aimed.
I can now rebuild working around that pulse and I am still working on the new spraybar which should really stir things up.
najer
Valuable Member
Ok I have been staying out of this virus crap because it scares the crap out of me, is your President serious?
You don't need to answer, we have a clown too, I am running out of savings and hate the thought of interacting with people, the world needs to tackle this fs.
You don't need to answer, we have a clown too, I am running out of savings and hate the thought of interacting with people, the world needs to tackle this fs.
RichtheReefer21
Scrap Yard Reefer
Excellence Award
Reef Tank 365
Article Contributor
Reef Squad Emeritus
Hospitality Award
Good luck with the rescape! I love the idea of building off a random flow point.
najer
Valuable Member
Thanks, this is how I left it yesterday.
I have watched as the lights came up, this is the position of the octopulse 2 on the divide.
The rock on the left needs to go back about 5 inches against the divide and corner of the weir box.
I always buy LR for shapes and all I did yesterday really was stand it up, I will lift it up properly later and have a look at it before I place it, it is currently blocking flow, it is really awkward doing this semi blind as I don't view it from the front.
The arch rock is spot on against the divide.
The jumble to the right is just storage, the island rock is the hard piece to place so as to not block flow so once I have the corner piece set I will rotate the large rock about 45 degrees clockwise and get the back edge touching the divide, trying to make it look like it is floating is the tricky bit, more later.
najer
Valuable Member
Ok, it turns out that the rock is about a foot long!
I had to move one of the base rocks, the lump in the middle is the top of it, but still can't get it quite right.
What I have managed is to basically block the swim through because the flow is so strong from the pulse 2! ;Facepalm
I have a lot of grumpy fish, the flame angel managed to get into the cube but now she won't come back in because she knows she will get blasted across the tank!
I had to move one of the base rocks, the lump in the middle is the top of it, but still can't get it quite right.
What I have managed is to basically block the swim through because the flow is so strong from the pulse 2! ;Facepalm
I have a lot of grumpy fish, the flame angel managed to get into the cube but now she won't come back in because she knows she will get blasted across the tank!
najer
Valuable Member
We have a snag!
I have tried this all ways and the piece of base rock I need to move is having none of it.
The island is sort of right but needs tilting left a touch and moving right about two inches.
I will try again in a bit, I don't want to cut the rock.
I have tried this all ways and the piece of base rock I need to move is having none of it.
The island is sort of right but needs tilting left a touch and moving right about two inches.
I will try again in a bit, I don't want to cut the rock.
RichtheReefer21
Scrap Yard Reefer
Excellence Award
Reef Tank 365
Article Contributor
Reef Squad Emeritus
Hospitality Award
Try flipping the large rock over.. sometimes throwing it all in the air and letting it drop works too.
najer
Valuable Member
Thanks guys, I rotated the "Jenga" rock 180 degrees and "pop", very happy with how today has gone, I need to tweak the arch tomorrow and level the island, I will chill with it for the evening and tomorrow morning and then work on the island and the lower sections.
najer
Valuable Member
My girlie popped in earlier to grab her tent and a few bits, we socially distanced, she is off to "our beach" for a few days, I told her to take loads of pics, my favourite place in the country, the beach I grew up on.
- Status
Similar threads
