Mixing XR30G6 + 2 XR15G6 - Balancing output

[Geikster]

Is there a way in the Mobius app to adjust individual light output within a single device group so help balance output? I've got a 6ft tank where I'm running a XR30 in the center and one XR15 on each end. The XR30 looks to be putting out more intensity (somewhat expected) than the XR15's on either side. I'm guessing I can put them each in their own group and independent schedule and balance with a par meter but I was curious if you can go device by device and adjust them. I have done the calibration on all of them in case that comes up. Ideas?

 

[blaxsun]

Yes, but only if you keep the XR30s and XR15s in separate lighting groups. I tried this, found it was more hassle than it was worth and just kept them all grouped together. Here's my tank and the PAR readings (71" length x 25.6" width x 23.6" height). These are Radion XR30/XR15 G5 Blues.

Here's my custom lighting schedule for reference.

 

[Geikster]

Thanks much @blaxsun for the response. You are extremely helpful as always. Since we have the same tank exactly, I'm thinking our lighting should line up pretty well with your PAR and schedule above. Cheers my friend!