OP
OP
It's just always getting splashed with crushed coral when the Wrasses are hunting pods LOL
MasiniReef SPS In Wall Peninsula
- Build Thread
- Thread starter watdachuck
- Start date
- Tagged users None
OP
OP
Renovation started in the basement this week. The contractor put up this plastic zip up liner to protect any debris from getting into the tank. Anyone else ever have to live through demo/painting/building around their tank?
OP
OP
For a limited time due to quarantine I am sharing my reef on Nest 
OP
OP
I tweaked my lighting schedule reducing the time frame spent in the highest intensity level. No change in overall max output, but my theory is this will give more comfort to my Euphyillia corals since they have been partially closing during peak hours. I also believe 3 hours at peak intensity is plenty for the stony's to thrive.
OP
OP
Hopefully I am not getting too aggressive with the changes. I just updated my lighting schedule to a slightly modified version of the WWC 900G Radion Schedule. I imagine there is some type of shock from the color change but the overall intensity is roughly the same as before.
OP
OP
I had to share this one too. I nearly lost my birdsnest completely about 6 months ago. It was about twice the size and had severe tissue loss forcing me to chop it down to almost the original frag.
IMO Birdsnest corals are easy to keep but are a Canaray when it comes to Alk swings. If I see an unhappy Birdsnest coral I know something is definitely off.
OP
OP
Top down Tuesday
OP
OP
OP
OP
Perspective
OP
OP
A better look at my Sunset Millepora colony and updated Strawberry Shortcake. Very happy with how these two have progressed in particular.
OP
OP
Under development
OP
OP
I've become a big fan of the wet skimming water change. I raise the sump level and and let the skimmer drain into a bucket while I siphon the bottom of the tank into a filter sock. That way I am able to save most of the pods that get sucked up.
OP
OP
Awaiting the basement remodel completion. The tank is covered in protective plastic to prevent debris and other contamination. I painted the entire ceiling with a spray gun without impacting the tank. The skimmer is on a closed loop system with a CO2 scrubber to ensure oxygen is available while the tank is completely sealed off.
OP
OP
The change is nearly complete!!
OP
OP
Some macro fun and of course more BoTom.
OP
OP
Right after a water change
OP
OP
Been seeing high silica in my water ever since the renovation started in the basement. Almost 100% is has to do with the slate tile I have been beating up and wasn't able to prevent all of the dust from getting into the air and then tank. Also, not sure how to target only silica for removal.
| Masini Reef 2020 - | ||||
| 07-16-2020 | Ammonia (NH3-4) | Good | 0 | 0.000 - 0.050 mg/L |
| 07-16-2020 | Nitrite (NO2) | Good | 0.007 | 0.000 - 0.100 mg/L |
| 07-16-2020 | Phosphate (PO4) | Good | 0.02 | 0.000 - 0.250 mg/L |
| 07-16-2020 | Nitrate (NO3) | Good | 2.8 | 0.000 - 25.000 mg/L |
| 07-16-2020 | Silica (Sio2-3) | High | 5.5 | 0.000 - 0.500 mg/L |
| 07-16-2020 | Potassium (K) | High | 460 | 350.000 - 450.000 mg/L |
| 07-16-2020 | Boron (B) | NA | NA | 3.000 - 6.000 mg/L |
| 07-16-2020 | Molybdenum (Mo) | Good | 0.3 | 0.000 - 0.300 mg/L |
| 07-16-2020 | Strontium (Sr) | Good | 7.64 | 5.000 - 12.000 mg/L |
| 07-16-2020 | Magnesium (Mg) | Good | 1300 | 1100.000 - 1400.000 mg/L |
| 07-16-2020 | Iodine (I) | Good | 0.08 | 0.030 - 0.090 mg/L |
| 07-16-2020 | Copper (Cu) | Good | 0.02 | 0.000 - 0.100 mg/L |
| 07-16-2020 | Alkalinity (meq/L) | Good | 2.61 | 2.500 - 5.000 meq/L |
| 07-16-2020 | Iron (Fe) | NA | NA | 0.000 - 0.010 mg/L |
| 07-16-2020 | Calcium (Ca) | High | 510 | 350.000 - 450.000 mg/L |
dungdatinh
Community Member
Look very clean
Similar threads
Dry Goods
Basement Clear Out in GTA Canada (Brand New Synergy, Lifereef, Advanced Acrylics, Trident, ReefMat and more)
- Price: $250 - $600
- Shipping NOT Available
