Looking for a second light fixture. Another viparspectra vs expensive leds vs DIY T5

Koh23

Valuable Member
View Badges
Joined
May 23, 2021
Messages
1,306
Reaction score
1,052
Location
Croatia
Rating - 0%
0   0   0
Did you take any numbers?

I kinda dobt that blue chanels give more lux than white....
 
OP
OP
KonradTO

KonradTO

Valuable Member
View Badges
Joined
Aug 11, 2021
Messages
1,254
Reaction score
702
Location
Germany
Rating - 0%
0   0   0
Did you take any numbers?

I kinda dobt that blue chanels give more lux than white....
Sure. For example at:
- 55%B 1%W (vipar) or 65% 45% (kessil) you get 16 kLUX
- vipar: 100%W 0%B = 19.8 kLUX --> 0%W 100%B=23.3 kLUX
-kessil 100%W 0%B= 24.5 kLUX --> 0%W 100%B 25 kLUX

You can see that with the kessil there is roughly the same output in LUX in the 2 channels. In the vipar probably the green and red diodes produce little light so they make the channel less powerful.
 

Semisonyx

Active Member
View Badges
Joined
Oct 10, 2012
Messages
289
Reaction score
194
Location
Birmingham, AL
Rating - 0%
0   0   0
Not sure if it really adds to the discussion, but I ran the vipar over my tank for 2 years. The key to these lights is keeping the optics on and running them high off the water for light blending. The optics work well, and even at 14” off the water, I never ran them over about 50%B/25%W. I supplemented with two diy led bars and a pair of t5 bulbs. One thing to consider is internal reflection in the tank. I found this typically helped keep PAR from significantly dropping off with depth in my tank.
 

oreo54

5000 Club Member
View Badges
Joined
Sep 18, 2017
Messages
5,970
Reaction score
3,673
Rating - 0%
0   0   0
Sure. For example at:
- 55%B 1%W (vipar) or 65% 45% (kessil) you get 16 kLUX
- vipar: 100%W 0%B = 19.8 kLUX --> 0%W 100%B=23.3 kLUX
-kessil 100%W 0%B= 24.5 kLUX --> 0%W 100%B 25 kLUX

You can see that with the kessil there is roughly the same output in LUX in the 2 channels. In the vipar probably the green and red diodes produce little light so they make the channel less powerful.
LUX meters are calibrated to human light sensitivity li KK e the curve below.
https://www.daltonengineering.co.uk/products/light-meter-with-light-sensor

Like 250 lux of blue = 1000 lux of green when sensor sensitivity is factored snd converted to par. Meter sensors only "captures" 25% ( in real life likely less than that) of the blue photons vs 100% of the green.

Numbers are fake but the idea is correct.
https://www.waveformlighting.com/horticulture/convert-lux-to-ppfd-online-calculator .
See the extreme example of monochrome blue vs daylight.



spectrum_x600.png
 
Back
Top