LocLine Leaking

TheSheff

Active Member
View Badges
Joined
Feb 26, 2022
Messages
491
Reaction score
312
Location
Virginia
Rating - 0%
0   0   0
Hello, I am having an issue that I cannot find the fix to. My return line is connected by tubing to a bulkhead, then loc line connectors in the tank in an arc to prevent siphoning, which works. but, When I turn my tank off, water continues to drain into the sump very slowly , what could this be caused by? Possibly the loc line leaking somewhere?
 
OP
OP
TheSheff

TheSheff

Active Member
View Badges
Joined
Feb 26, 2022
Messages
491
Reaction score
312
Location
Virginia
Rating - 0%
0   0   0
As long as the open end of the loc-line is below the water level it will continue to siphon back.
i thought the arc in the loc line prevented that? The top of the arc is about 1.5 inches above the surface of the water
 

The_Paradox

Valuable Member
View Badges
Joined
May 6, 2023
Messages
2,096
Reaction score
2,256
Location
On the Water
Rating - 0%
0   0   0
i thought the arc in the loc line prevented that? The top of the arc is about 1.5 inches above the surface of the water

That’s how a siphon works. Negative pressure, otherwise it’s just gravity. I have the corner of a flat style return about 5mm below the water line. It’s at around 45 degree angle. Gets good surface movement without salt creep and breaks the siphon once the pump is off before even coming out of the water.
 
OP
OP
TheSheff

TheSheff

Active Member
View Badges
Joined
Feb 26, 2022
Messages
491
Reaction score
312
Location
Virginia
Rating - 0%
0   0   0
Hello all, I spent some more time looking at the tubing and loc line and it seems that I needed to raise the output up slightly as well as the drain. Thank you guys!
 
Back
Top