JoJo's No Funny Business Office Tank Thread
- Build Thread
- Thread starter JoJosReef
- Start date
- Tagged users None
OP
OP
Quick fix: Noopsyche Mini Flex Arm Bracket too short for your AIO?
Hi all, Just sharing the problem I have with my Noopsyche K7 minis, which I decided to use for my nanos and now my 40L. Great little light, but what bothers me is this: The flex arm doesn't reach to the middle of a tank when attached to the back glass of an AIO, despite being optimal for an...
www.reef2reef.com
OP
OP
Trimmed the RTN'ing birdsnest yesterday and left the trimmings in a tupper. This morning smells off (not like rotten, just a bit off) and water is cloudy, so I'm pretty sure there's a raging bacterial infection in the coral.
I might not have gotten all of it, but best I could do at the time. Maybe some increased flow in that part will help the remaining birdsnest recover:
I might not have gotten all of it, but best I could do at the time. Maybe some increased flow in that part will help the remaining birdsnest recover:
OP
OP
Great question, but my answer could be different from now in a couple months--constantly on a learning curve, here. For example, what in the world is happening to my birdsnest!?
Things I would have changed for sure:
1. Sprung for a new Maxspect xf330 or gone with dual jebao gyres. I first got the Maxspect Jump 2k ($220), which is a great pump, but I've found that the cross-flow needs some disruption to get flow evenly throughout the tank. Not enough coming from the left side. Then got a pair of xf330s secondhand ($200) on R2R Marketplace and sold the Jump 2k ($100), and one of the xf330s is not working, so I'm now in the position of buying new parts for the broken xf330.
2. Definitely different doser and gone with 4 heads instead of 3. I am right now watching it NOT dose at the scheduled time (internal clock probably went off) and the fish are hanging out waiting for food to drop. I have no way to correct it because I left my laptop at home and that's the only device that seems to connect directly to the doser. I've yet to get the Simplicity up and running--I need a new barb fitting to get all 4 heads running with three combining different liquid foods--but I have high hopes for it.
3. Probably would have run another 6 weeks of Flux Rx to see if the last bits of bubble algae would go away. I'm not sure it would, but I had a lazy week last week (tank-wise, work/family wise was too busy). Now it is threatening a come-back.
4. Would have rearranged some of the initial coral layout. I took out the alveopora because after 5 months it is still not coming all the way out and is unhappy. I think it doesn't like the flow, but I don't have a better place to put it, so in the frag tank for now. Same with the candy cane, which looked like it was going to die, then got knocked over and has been sitting in the sand for a few weeks and suddenly looks much more alive. ¯\_(ツ)_/¯
5. I haven't installed the IM skimmer yet, but it seems to have horrible reviews, so I'd probably skip the IM Skimmer and go straight to one of the better nano skimmers like the Bubble Magus one.
Things I would have changed if money wasn't a consideration:
1. Gone with the ecotech powerheads with extra wetsides. I'm not sticking to a good citric acid cleaning schedule on the gyres. Plus, the tank is shallow, so the gyre action is a bit blocked by the height of the rocks, and it also puts the pump very close to the nems on the left side (no gyre currently on the left, but that's the plan). I think the wires-outside-of tank plus swapping out wetsides seems like the lazy man's road to success.
2. Gone with the 80gal AIO (4ft tank) instead of the 40gal AIO. I love the 40L, but you run out of room fast, and I'd love to get more wrasses like a Halichoeres iridis, some fairies and a second leopard (M. negrosensis). I'm currently planning to add a pinkie and a Cirrhilabrus rubeus, but that's going to max out the tank. Plus I could get a foxface and maybe a kole tang. Room for an elegance, cynarina and a few more sandbed corals (would love a colorful diaseris plate). Room for a clam. Always need a bigger tank, it seems.
All in all, I'm not complaining about anything except the doser! Love this tank!
OP
OP
Last Friday's FTS:
OP
OP
Removed the birdsnest today. Pretty crazy how much it grew! Skeleton crisscrossing everywhere.
Managed to cut off a few small pieces that weren't nasty and strew them around the tank. Fingers crossed some of them make it.
Managed to cut off a few small pieces that weren't nasty and strew them around the tank. Fingers crossed some of them make it.
OP
OP
#WrasseWednesday
Baby brine feeding time!
SPS island is a bit sad now without the birdsnest. Might have to put in my neon birdsnest that's been sitting in the frag tank.
Baby brine feeding time!
SPS island is a bit sad now without the birdsnest. Might have to put in my neon birdsnest that's been sitting in the frag tank.
OP
OP
Downside of a shallow reef:
There's about 1mm clearance of that stylo from the water surface when the return pumps are off (a bit more when the return pumps are running). I do love that stylo, though. Great color, great growth. Like that goldenrod, too... I like coral!
There's about 1mm clearance of that stylo from the water surface when the return pumps are off (a bit more when the return pumps are running). I do love that stylo, though. Great color, great growth. Like that goldenrod, too... I like coral!
OP
OP
And a few thoughts about changes in tank chemistry:
- Up until about 2 weeks ago, I was getting heavy film algae necessitating glass scraping twice a week. No problem, everything growing and fattening up. Right now, it is not even needed once a week.
- I changed up the food mixture a bit, but not the amount fed
---> Previously was a mix of ROE + Tigger Pods Feast + Oyster Feast + Phyto Feast; recently replaced the Tigger Pod Feast for double ROE;
- I dosed a bit of AF Life Source mud last week and should do it again today
- Birdsnest had some sort of infection and died
- All other living (visible) creatures seem fine
- ALK is staying subbornly in the mid-6s-7s, no change there; NO3 is MAYBE 1ppm, but not zero at least.
What does this mean!?
My best guess is that change will happen in your tank. Perhaps I should run a full set of tests and see what has changed.
- Up until about 2 weeks ago, I was getting heavy film algae necessitating glass scraping twice a week. No problem, everything growing and fattening up. Right now, it is not even needed once a week.
- I changed up the food mixture a bit, but not the amount fed
---> Previously was a mix of ROE + Tigger Pods Feast + Oyster Feast + Phyto Feast; recently replaced the Tigger Pod Feast for double ROE;
- I dosed a bit of AF Life Source mud last week and should do it again today
- Birdsnest had some sort of infection and died
- All other living (visible) creatures seem fine
- ALK is staying subbornly in the mid-6s-7s, no change there; NO3 is MAYBE 1ppm, but not zero at least.
What does this mean!?
My best guess is that change will happen in your tank. Perhaps I should run a full set of tests and see what has changed.
Blopple
Active Member
I feel like testing is never a bad thing especially since the birdsnest just took a hit. I'd be interested to see the full numbers.
OP
OP
Two vids today, baby brine shrimp time and regular feeding time. I don't think there's anything more exciting for the tank (fish, corals, even the inverts) than dumping a load of baby brine shrimp into the tank. My porcelains crabs go nuts.
photos.app.goo.gl
photos.app.goo.gl
New video by Joseph Campo
photos.app.goo.gl
New video by Joseph Campo
photos.app.goo.gl
OP
OP
This guy also knows when it's feeding time
photos.app.goo.gl
New video by Joseph Campo
photos.app.goo.gl
OP
OP
I bought freeze dried mysis and calanus from BRS. In principle, I like the idea. In practice, how do you get this stuff to work!? It just floats. Seems like soaking doesn't make it float less. Vortexing doesn't seem to make it float less...
No comment on my vortex, pls, yes it's seen better days.
No comment on my vortex, pls, yes it's seen better days.
Slocke
I’m pedantic, ignore me
Excellence Award
Reef Tank 365
Photo of the Month
Article Contributor
My Tank Thread
My Aquarium Showcase
I got dried food while I was cycling my first tank. I still have it…I bought freeze dried mysis and calanus from BRS. In principle, I like the idea. In practice, how do you get this stuff to work!? It just floats. Seems like soaking doesn't make it float less. Vortexing doesn't seem to make it float less...
No comment on my vortex, pls, yes it's seen better days.
Stuff is useless. Floats and the fish don’t like it.
Stang67
KEEP CALM AND REEF ON
Partner Member 2024
Midwest Reefer
Reef Pumpkin Carver
Ohio Reefer
R2R Secret Santa 2023
My Tank Thread
Mix with thawed out frozen? Or use to make diy frozen food?
tbrown
Nominated Cronie Intern - Might be failing?
Feeding tube?
OP
OP
There's a freezer in my office, but it's all the way on the other side of the building, and... I am le tired.
End of the day, dumped what's in the tube in the tank and still floating.
If I dump it in right when the gyre is going full blast, it does blow around a bit. The Banana Coris Wrasse seems to like it a lot. I'll probably just mix some up and dump into the flow occasionally with the return pumps off.
tbrown
Nominated Cronie Intern - Might be failing?
Wait, you have a Coris Chrysus?There's a freezer in my office, but it's all the way on the other side of the building, and... I am le tired.
End of the day, dumped what's in the tube in the tank and still floating.
If I dump it in right when the gyre is going full blast, it does blow around a bit. The Banana Coris Wrasse seems to like it a lot. I'll probably just mix some up and dump into the flow occasionally with the return pumps off.
Slocke
I’m pedantic, ignore me
Excellence Award
Reef Tank 365
Photo of the Month
Article Contributor
My Tank Thread
My Aquarium Showcase
Similar threads
