Please could I have some advice from those ink bird users, I've been using the ink bird on my Evo 13G for a few months, very peace of mind and allowed me to holiday while checking the temperature and remotely putting on the fan as required.
yesterday I moved everything to my upgraded tank with sump. All ther parameters matched, the nicrew 300w was set at 26°C but the ink bird alarmed at 4am in the morning showing the tank temperature at 24.5°c
My inkbird was meant to turn the heater on at 25.5 until 26 and I am unsure what went wrong..... did we have a power cut, I really don't think so.
Does the nicrew not work sufficiently or should i have the nicrews temperature set a lot higher
probes are reading from above inside my tank the nicrew is in the sump outlet side.
At 4am I added my eheme 75w heater to get the heat up which I was told wouldn't be sufficient for my tank size but kept for salt mixing, I guess I will keep it plugged into the ink bird as a back up like BRS advise
Any more advice on settings and set up having an ink bird connected to my tank with sump much appreciate
yesterday I moved everything to my upgraded tank with sump. All ther parameters matched, the nicrew 300w was set at 26°C but the ink bird alarmed at 4am in the morning showing the tank temperature at 24.5°c
My inkbird was meant to turn the heater on at 25.5 until 26 and I am unsure what went wrong..... did we have a power cut, I really don't think so.
Does the nicrew not work sufficiently or should i have the nicrews temperature set a lot higher
probes are reading from above inside my tank the nicrew is in the sump outlet side.
At 4am I added my eheme 75w heater to get the heat up which I was told wouldn't be sufficient for my tank size but kept for salt mixing, I guess I will keep it plugged into the ink bird as a back up like BRS advise
Any more advice on settings and set up having an ink bird connected to my tank with sump much appreciate