My tank is being overrun by some brown crud and I am uncertain if it is dinos or cyano of some type. I saw quite a few people posting microscope pictures so I obtaned one and tried capturing a few pictures with it. However while I see lots of cool stuff and many little critters moving around I don't see anything that matches the pictures I have seen others post.
I have attached a few pictures. Some of the tank photos show an uncleaned area on the left and a cleaned area on the right. The crud blows off with just a puff of water or blast from a power head.
I also attached some microscope pictures at 400X
My current water parameters are:
Ammonia and Nitrite 0
Nitrate 3.7 PPM
Phosphate 0.06 PPM
Alkalinity 8.6
Salinity 1.023
Temperature 77.8
There is pretty good water flow, multiple gyres and octopulses.
Whatever it is, Chemiclean doesn't seem to touch it.
I would sure welcome any suggestions.
Thanks,
Don
I have attached a few pictures. Some of the tank photos show an uncleaned area on the left and a cleaned area on the right. The crud blows off with just a puff of water or blast from a power head.
I also attached some microscope pictures at 400X
My current water parameters are:
Ammonia and Nitrite 0
Nitrate 3.7 PPM
Phosphate 0.06 PPM
Alkalinity 8.6
Salinity 1.023
Temperature 77.8
There is pretty good water flow, multiple gyres and octopulses.
Whatever it is, Chemiclean doesn't seem to touch it.
I would sure welcome any suggestions.
Thanks,
Don