I just got my ICP back with my Manganese at undetectable levels and Molybdenum at 0.104 ppb.
I want to dose 0.1 µg/L of Manganese daily and I want to increase my Molybdenum level by 15 µg/L.
My tank is 150 gallons (567.81 L).
For my daily Manganese dose, 567.81 L x 0.1 µg/L = 56.781 µg of Manganese daily.
If use Manganese Gluconate, which is 25mg Manganese per 225mg of Manganese Gluconate, I should use 511.029 µg (0.511 mg) of Manganese Gluconate daily.
For my molybdenum, 567.81 L x 15 µg/L = 8,517.16 µg = 8.517 mg of Molybdenum.
If I use Sodium Molybdate, which is 39.5% Molybdenum, I should use 21.562 mg of Sodium Molybdate.
Does this look right? I typically use Brightwell Replenish trace minerals daily and apparently they're formula doesn't include molybdenum. I know Replenish already has Manganese, but my Goniopora hasn't been looking too good, so I want to try increasing it further.
I want to dose 0.1 µg/L of Manganese daily and I want to increase my Molybdenum level by 15 µg/L.
My tank is 150 gallons (567.81 L).
For my daily Manganese dose, 567.81 L x 0.1 µg/L = 56.781 µg of Manganese daily.
If use Manganese Gluconate, which is 25mg Manganese per 225mg of Manganese Gluconate, I should use 511.029 µg (0.511 mg) of Manganese Gluconate daily.
For my molybdenum, 567.81 L x 15 µg/L = 8,517.16 µg = 8.517 mg of Molybdenum.
If I use Sodium Molybdate, which is 39.5% Molybdenum, I should use 21.562 mg of Sodium Molybdate.
Does this look right? I typically use Brightwell Replenish trace minerals daily and apparently they're formula doesn't include molybdenum. I know Replenish already has Manganese, but my Goniopora hasn't been looking too good, so I want to try increasing it further.
Last edited: