Ok after struggling with high to me nitrates at 15ppm , phosphate was 0.05. I decided to try ABIT of a makeshift fuge. Unfortunately my sump only has two chambers so having it in the sump wasn't an option, my tank is 25gallon so opted with a 10litre fuge. I have a 400lph pump in the sump moving water to the fuge and then gravity draining back down and just used a simple kitchen food container with a couple of bulk heads. I have ordered a black Rubbermaid With a lid so I can avoid light getting at the DT. Debating adding an air pump to the fuge to add a little more circulation.
My question is on the first day of running my nitrates have dropped 9ppm in the first day of setup, I would expect them to drop slightly as I have added volume however can this be correct? I'm using hanna high range nitrate checker, double checked got the exact same result, phosphate remains unchanged.
Excuse the mess, we are in the process of completely renovating the house. Kitchen is almost finished and tank can go to its final destination
My question is on the first day of running my nitrates have dropped 9ppm in the first day of setup, I would expect them to drop slightly as I have added volume however can this be correct? I'm using hanna high range nitrate checker, double checked got the exact same result, phosphate remains unchanged.
Excuse the mess, we are in the process of completely renovating the house. Kitchen is almost finished and tank can go to its final destination