BC Bonfire Grow Out Thread
- Thread starter BranchingHammer
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)
Viva'sReef
Valuable Member
I bought these too via @amazon
Still haven't heard anything in way of shipping, was there an update somewhere that I might of missed?
OP
OP
I also have not heard anything from Adam yet. My guess is that he is busy having fun with his family during the holiday weekend. He'll probably message us sometime this week. @Battlecorals, Adam, do you have an update on the shipping?
Yeah shoot guys I am really sorry for the radio silence again here. Had a snag. with a styro order late last week that is going to push shiping back a little bit, unfortunately.
I ordered a pallet of smaller styros that are far more ideal for shipping one coral in, that i was expecting today or tomorrow, but I got a notice late last week that i needed to update my card info with them, so it hadn't even been processed yet most, unfortunately. I am going to get it all straightened out today for sure and hopefully have the styros by the end of the week.
Having said that, I've got a handful of orders that are not just the contest frag. so I am planning on contacting all of you guys this week first to lock you in. And no, I promise this is not an attempt to get anyone to pad their orders. I am 100% fine with shipping single corals. But I need to get the smaller styros, or it will be brutal cost-wise. lol
again really sorry for any lag or delays in communication.
I ordered a pallet of smaller styros that are far more ideal for shipping one coral in, that i was expecting today or tomorrow, but I got a notice late last week that i needed to update my card info with them, so it hadn't even been processed yet most, unfortunately. I am going to get it all straightened out today for sure and hopefully have the styros by the end of the week.
Having said that, I've got a handful of orders that are not just the contest frag. so I am planning on contacting all of you guys this week first to lock you in. And no, I promise this is not an attempt to get anyone to pad their orders. I am 100% fine with shipping single corals. But I need to get the smaller styros, or it will be brutal cost-wise. lol
again really sorry for any lag or delays in communication.
Count me in for a order with a large battle box I need to add Adam.
Epic Aquaculture
The artist formerly known as SawCJack00
Here's my setup:
Tank - Miracles Aquarium custom built 460 gallon peninsula with starfire glass on 3 visible sides. 84"L x 42"W x 30"T
Stand - Welded steel with rubberized coating built by Miracles Aquariums
Sump - custom built Bashsea SS-60 modified to be 24" wide in order to accommodate my skimmer.
Controller - Neptune Apex connected to Alkatronic for Alk control
Lighting - 8 Radion XR30 G4 Pros + 4 Radion XR15 G4 Pros in 4 Aquatic Life T5 Hybrid fixtures mounted in an 80/20 aluminum frame which will be suspended above the tank on an automated bicycle lift that I can raise and lower using my phone. 16 - 36" ATI B+ T-5 bulbs.
Return Pumps - Abyzz A200 and Abyzz A100 attached to 1" Sea Swirls. The A100 feeds my Aqua UV 114 W UV Sterilizer
Skimmer - Bubble King Super Marin 300
Flow - 4 Ecotech MP60's and 2 Maxspect Gyre 350's. Returns are through 1" Sea Swirls
Filtration - 3 - 7" filter 200 micron filter socks. Clear Water Scrubbers CW300 Algae Turf Scrubber. 2 Aquamax reactors to be used for Carbon and GFO on occasion if needed. Actual ocean live rock in the sump. 60 Lbs of Miracle Mud in the sump. Lot's and Lot's of Pond Matrix in the sump.
Alk supplementation - DaStaCo Calcium Reactor and Kalk through a Kalk stirrer
Substrate - 2" of Caribsea Special Grade reef sand seeded with products from Indo Pacific Sea Farms.
ATO - 73 gallon Advanced Acrylics reservoir with Spectrapure Auto Topoff System
AWC - Neptune Dos
Tank - Miracles Aquarium custom built 460 gallon peninsula with starfire glass on 3 visible sides. 84"L x 42"W x 30"T
Stand - Welded steel with rubberized coating built by Miracles Aquariums
Sump - custom built Bashsea SS-60 modified to be 24" wide in order to accommodate my skimmer.
Controller - Neptune Apex connected to Alkatronic for Alk control
Lighting - 8 Radion XR30 G4 Pros + 4 Radion XR15 G4 Pros in 4 Aquatic Life T5 Hybrid fixtures mounted in an 80/20 aluminum frame which will be suspended above the tank on an automated bicycle lift that I can raise and lower using my phone. 16 - 36" ATI B+ T-5 bulbs.
Return Pumps - Abyzz A200 and Abyzz A100 attached to 1" Sea Swirls. The A100 feeds my Aqua UV 114 W UV Sterilizer
Skimmer - Bubble King Super Marin 300
Flow - 4 Ecotech MP60's and 2 Maxspect Gyre 350's. Returns are through 1" Sea Swirls
Filtration - 3 - 7" filter 200 micron filter socks. Clear Water Scrubbers CW300 Algae Turf Scrubber. 2 Aquamax reactors to be used for Carbon and GFO on occasion if needed. Actual ocean live rock in the sump. 60 Lbs of Miracle Mud in the sump. Lot's and Lot's of Pond Matrix in the sump.
Alk supplementation - DaStaCo Calcium Reactor and Kalk through a Kalk stirrer
Substrate - 2" of Caribsea Special Grade reef sand seeded with products from Indo Pacific Sea Farms.
ATO - 73 gallon Advanced Acrylics reservoir with Spectrapure Auto Topoff System
AWC - Neptune Dos
Oregon Grown Reef
Valuable Member
Do they give out participation trophies? I wish I could trash talk, but I'm pretty much speechless after this.
Add some glass, water, and bottled bac and I think you are good to go.I think I’m ready!
If say I bought some of that actual live ocean rock from you, think you could throw in a few freebie acropora?
nah, now all the pressure is on him
I am having a ruler custom made. The secret is all in the calibration.
Add to that my purchase of a $20,000 gift certificate from Adam, and I think I should just go ahead and collect my trophy now saving you folks all the trouble and worry.
Add to that my purchase of a $20,000 gift certificate from Adam, and I think I should just go ahead and collect my trophy now saving you folks all the trouble and worry.
I am having a ruler custom made. The secret is all in the calibration.
Add to that my purchase of a $20,000 gift certificate from Adam, and I think I should just go ahead and collect my trophy now saving you folks all the trouble and worry.
if you're printing your own ruler, you should have to show it against a known object like a dollar bill in order to be able to use it
That would defeat the whole purpose; it would be fair and I might not "win". Where's the fun in that?
Don't worry Peanut, I was joking about the $20k also.
what?!?! I bought a $20k gift cert too just so you wouldnt have an advantage
Brilliant! Finally a tank with enough potash, phosphorus and nitrogen to notch it into overdrive!I’m so ready! I think this will do the trick
It has arrived. Thanks @Battlecorals for this awesome battle box. Picture and measurement to come.
Attachments
Similar threads
