30 gallon frag/cube build with 20g long sump
- Cube Build
- Thread starter nemo1017
- Start date
- Tagged users None
OP
OP
nemo1017
Active Member
Paint:
-white 123 primer
- black appliance epoxy
- black plastidip the bottom and top surfaces for grip
Wood:
-I added 3/4" plywood on the top and bottom for added support for the tanks.
- I plan to add doors to the front and sides.
Plumbing:
I changed the plumbing from pvc to braided pvc for the return and spa flex for the overflow.
The return pump is a jebao dc 2000
Sump is a 20g long. I did not use baffles for this sump. I did however try to modify it with a bucket where a bubble magus curve 5 skimmer will go. The middle is the refugium area. I sectioned off the return section with egg crate and Velcro. I placed a small section of acrylic on the bottom to prevent detritus being sucked up by the return pump. The return pump is elevated on egg crate.
-white 123 primer
- black appliance epoxy
- black plastidip the bottom and top surfaces for grip
Wood:
-I added 3/4" plywood on the top and bottom for added support for the tanks.
- I plan to add doors to the front and sides.
Plumbing:
I changed the plumbing from pvc to braided pvc for the return and spa flex for the overflow.
The return pump is a jebao dc 2000
Sump is a 20g long. I did not use baffles for this sump. I did however try to modify it with a bucket where a bubble magus curve 5 skimmer will go. The middle is the refugium area. I sectioned off the return section with egg crate and Velcro. I placed a small section of acrylic on the bottom to prevent detritus being sucked up by the return pump. The return pump is elevated on egg crate.
SantaMonicaHelp
Valuable Member
Very nice pictures. I look forward to seeing your updates.
- C. Smith
- C. Smith
Similar threads
