*** 10 WINNERS!! WIN a BRAND NEW Natura iCon Reef Light in The Amazing Orphek Giveaway!! $8,000+ in Prizes!! ***

[SmithsWrld]

DAILY QUESTION: What light do you have over your tank right now?

I currently run a Maxspect Jump over my tank.

 

[fishface NJ]

DAILY QUESTION: How do you integrate new lighting technology with existing aquarium setups?

Everything I have is stand alone… manual on and off

 

[revhtree]

These new lights look great! Thank you for the giveaway @Orphek!!

 

[Shawnd08]

DAILY QUESTION: What light do you have over your tank right now?

Two xr15 pro Gen 6's with a 39" AI Blade Grow over the front and a 21" over the back.

 

[tREEFarm]

OFFICIAL ENTRY (must be done for the bonus entries to count): Check out the Natura iCon Reef LED Light and make a post in this thread with one reason you hope you win this prize.

I run all my tanks with a more 'natural', whiter spectrum. One reason I hope to win is to experiment with the natural spectrum of this light and the sync feature with the sun/moon is pretty cool too!

 

[A-10reefer]

DAILY QUESTION: How do you integrate new lighting technology with existing aquarium setups?

I havent fully integrated the lights and the whole setup into one setup. I just use the stand alone ai app. I havent looked into the mobius app, one day ill look into getting everything to play nice with each other

 

[Mschmidt]

@ShakeyGizzard tag back

 

[Mschmidt]

@exnisstech tag back

 

[Mschmidt]

@LadyMac tag back

 

[Mschmidt]

@tbrown tag back

 

[Mschmidt]

@Goaway tag back

 

[muffinmanXL]

Working on coloring up this little guy and could use some more par

 

[muffinmanXL]

DAILY QUESTION: How do you integrate new lighting technology with existing aquarium setups?

I eyeball the spectrum to match as closely as I can and whip out my par meter to start at similar levels. At least for my SPS tank

 

[Reefing_addiction]

Maybe he should suck less at his job...

100% lol
Since I got hired 6 years ago I’ve applied for 3 shift lead spots and 3 supervisor spots (not counting the one I got). In between I pushed to know more - learn more - and be better! One of the spots I got turned down for I said “that’s ok! I’ll just keep applying till you promote me!”

He applied for the one lead position that he got like 1.5 years ago.

I’ve held 3 different jobs within the company (not counting supervisor) in the last 6 years

 

[Reefing_addiction]

DAILY QUESTION RESPONSE: Here's what I do -
Integrating new lighting technology into your aquarium setup can be a really rewarding project. It’s all about giving your tank a fresh look while making sure your fish, corals, and plants are happy and thriving. Here’s how you can go about it, from one aquarium hobbyist to another:

1. Take Stock of What You Have​

• Look at Your Current Lighting: First, figure out what kind of lights you’re currently using. Are they old-school fluorescent tubes, some basic LEDs, or maybe even metal halide? You’ll want to know the specs—like how bright they are, the color temperature, and how much power they’re using.
• Know Your Tank's Needs: Think about what your aquarium inhabitants need in terms of light. If you’ve got a planted tank or a reef setup, certain species will need specific light intensities and spectrums to thrive. It’s all about getting that balance right.

2. Pick the Right New Lights​

• Upgrade to LEDs: LEDs are the go-to for most hobbyists these days—they’re energy-efficient, last a long time, and you can tweak the spectrum and intensity to suit your tank perfectly.
• Check for Adjustability: Make sure the lights you pick allow you to adjust things like brightness and color spectrum. This is super handy if you’ve got plants or corals that are picky about their light.
• Fit to Your Tank: If you’re using a hood or specific mounting system, make sure the new lights will fit without too much hassle. Sometimes a bit of DIY is needed, but that’s part of the fun!

3. Plan Your Upgrade​

• Sort Out Power Needs: Check that your power supply can handle the new lights, especially if they’re more powerful than your old ones. It’s always good to be prepared with the right wiring or adapters.
• Mind the Heat: New lights, especially high-powered LEDs, can get warm. Make sure your tank is well-ventilated, or consider adding a small fan if needed.
• Go Slow with the Change: Don’t switch everything over all at once. Your tank inhabitants might need some time to adjust to the new lighting, so start with lower intensity and gradually increase it over time.

4. Install the New Lights​

• Mounting: Get those new lights set up according to the instructions. Secure them properly, and make sure they’re positioned to light up the whole tank evenly.
• Set Up a Timer: If your new lights come with a timer, program it to mimic a natural day/night cycle. You’ll be able to tweak the timing based on how your tank residents respond.
• Tweak and Test: Once everything’s in place, take a good look at how the light spreads across the tank. Adjust as needed to make sure there aren’t any dark spots or overly bright areas.

5. Watch and Adjust​

• Keep an Eye on Your Tank: After the new lights are in, watch how your plants, corals, and fish react. If anything seems off, like plants not growing well or corals bleaching, tweak the settings a bit.
• Manage Algae: Sometimes new lights can lead to a little algae boom. If that happens, dial back the intensity or shorten the light period. You can also introduce some algae-eating critters to help out.
• Regular Upkeep: Keep your lights clean and check the settings regularly to make sure everything’s working as it should.

6. Document Your Setup​

• Note Your Settings: Jot down your light settings—intensity, spectrum, and timing—so you can easily make adjustments or recreate the setup if needed.
• Backup Plans: If your lights have programmable features, back up the settings in case of a power outage or system reset.

Updating your aquarium’s lighting can breathe new life into your setup, making your tank look amazing while keeping your aquatic life healthy.

TLDR

 

[Reefing_addiction]

DAILY QUESTION: How do you integrate new lighting technology with existing aquarium setups?

What @Mschmidt said!

I’ll tell you when I win the lights and find out!!

 

[alxjrz]

DAILY QUESTION: How do you integrate new lighting technology with existing aquarium setups?

I have in the past added to the existing lights as a transition, I would start a new tank if I needed it, studying the corals under different lighting has always fascinated me. Happy corals... Happy life... lol

 

[Mschmidt]

100% lol
Since I got hired 6 years ago I’ve applied for 3 shift lead spots and 3 supervisor spots (not counting the one I got). In between I pushed to know more - learn more - and be better! One of the spots I got turned down for I said “that’s ok! I’ll just keep applying till you promote me!”

He applied for the one lead position that he got like 1.5 years ago.

I’ve held 3 different jobs within the company (not counting supervisor) in the last 6 years

It shouldn't be your fault he's not motivated for growth.

 

[Reefing_addiction]

It shouldn't be your fault he's not motivated for growth.

It shouldn’t but


People


Ya know?

 

[ShakeyGizzard]

oops, wrong thread