Ditto
Valuable Member
- Review score
- +0 /0 /-0
Partner Member 2023
R2R Supporter
R2R Excellence Award
Hospitality Award
Controller Advisor
Build Thread Contributor
With any new tank it needs to have it own RODI Station for Saltwater and for ATO. I really did not want to have to carry any buckets anymore, which is one of my low maintenance wish list items, so this water station is going to allow me to achieve this.
RODI Water is stored in the top Rubbermaid container up to 22 Gallons, and is dumped into the Brute Trash Can where it can be re-circulated with Salt. The pump PanWorld 200 Pump will then proceed to pump it upstairs to the sump to fill the tank. (This will have GHL dual Optical sensor as a backup for safety details when building the tank)
I will have a ATO Reservoir which is also 5 gallons under the tank upstairs, with a GHL Maxi tied to the P4 with a Min/Max Float switch within. (Details when I am building the tank). This will draw water also from the RODI Rubbermaid container.
I dialed in the Booster pump to 80PSI and it now filling the Rubbermaid Container.
Nothing to Fancy, on the bottom of my Basement Steps
Plumbing within the Brute Mixing Station, this should provide more then enough circulation.
RODI Station up and Running, with Booster pump, with UV. (TDS Tester on both the SpectraPure and within the Container are at 0)
Return Pump and Circulation of the Saltwater within the Brute Mixing Station. (Pan World 200 Pump)
One valve on the pump is on the inlet of the pump is just for easier maintenance, the upper Shut off switch is towards the tank upstairs, and will be my redundant one as one will be up by the tank also.
Plumbing between the Rubbermaid RODI Water and the Brute Mixing Station.
Two shut off valves, with one used to allow RODI water into the Brute Mixing Station. The Second is if I wish to have RODI water empty into a bucket.
RODI Water is stored in the top Rubbermaid container up to 22 Gallons, and is dumped into the Brute Trash Can where it can be re-circulated with Salt. The pump PanWorld 200 Pump will then proceed to pump it upstairs to the sump to fill the tank. (This will have GHL dual Optical sensor as a backup for safety details when building the tank)
I will have a ATO Reservoir which is also 5 gallons under the tank upstairs, with a GHL Maxi tied to the P4 with a Min/Max Float switch within. (Details when I am building the tank). This will draw water also from the RODI Rubbermaid container.
I dialed in the Booster pump to 80PSI and it now filling the Rubbermaid Container.
Nothing to Fancy, on the bottom of my Basement Steps
Plumbing within the Brute Mixing Station, this should provide more then enough circulation.
RODI Station up and Running, with Booster pump, with UV. (TDS Tester on both the SpectraPure and within the Container are at 0)
Return Pump and Circulation of the Saltwater within the Brute Mixing Station. (Pan World 200 Pump)
One valve on the pump is on the inlet of the pump is just for easier maintenance, the upper Shut off switch is towards the tank upstairs, and will be my redundant one as one will be up by the tank also.
Plumbing between the Rubbermaid RODI Water and the Brute Mixing Station.
Two shut off valves, with one used to allow RODI water into the Brute Mixing Station. The Second is if I wish to have RODI water empty into a bucket.
Last edited: