Waterbox Aquariums and the Random Flow Generator - A Perfect Match!

[Vivid Creative Aquatics]

If I have a 25 gallon peninsula with the stock pump what size would I need? Probably the 1/4?

If you are sticking with the with the stock pump for that tank you actually have a few options. The stock pump is lsited as a 1000 L//H (264 GPH) pump. that's enough to overdrive a singe 1/4in RFG or supply just the right amount for a dual 1/4in RFG setup.

You could also do a single 1//2in , but it would be at the lower end of the suggested flow rating for hat RFG,

Here are your two best options

Dual 1/4in RFG
You'll need the Ultimate Nano Tank Return Line Upgrade kit and a 16.5mmWaterbox adapter. You'll find both of these items listed at the bottom of this page.

Ultimate Nano Tank Return Line Upgrade Kit – Dual 1/4in Flex-Series RFG | Vivid Creative Aquatics

vividcreativeaquatics.com

Single 1/4in RFG
the Waterbox® Cube Flow Kit with 1/4in Random Flow Generator is a pre-configured Flow Kit - so it comes with everything you need.

Waterbox® Cube Flow Kit with 1/4in Random Flow Generator® Nozzle – WBFK025X1 | Vivid Creative Aquatics

vividcreativeaquatics.com

 

[jd10336710]

I have a Waterbox REEF 220.6 and was wondering what adapter is needed to use a 3/4 RFG?

 

[Vivid Creative Aquatics]

I have a Waterbox REEF 220.6 and was wondering what adapter is needed to use a 3/4 RFG?

That one is listed as having DN25 return plumbing, but it does not seem to list the specific size of the return hoses size
Specs are at the bottom of this page.

REEF DX 220.6

• Dimensions (LxWxH): 1836 x 643 x 600mm (72.3"×25.3"×23.6")• Height with Cabinet: 1500mm/59.1"• Display Volume: 632 L/167 gals• Total Volume: 837 L/221.2 gals• Glass Thickness: 19mm• Includes: Aquarium, Cabinet, Sump, Plumbing Kit, Filter Socks, Sock SilencersView Full Specifications

waterboxaquariums.com

With that said our new Flex-Series 3/4in RFG nozzles will fit the Waterbox system with the DN20 return pipes WITHOUT adapters. The flexible nozzle simply stretchers to fit that hose.

Its possible our 1in Flex-Serie RFG may fit . You can view the 1in here

RFG-Flex Series - Random Flow Generator Nozzles | Vivid Creative Aquatics

vividcreativeaquatics.com

It has a fitment range of aprox 31mm to 33mm

If you can get an Outer Diameter measurer to of the stock how, that would be helpful.

 

[tuanc704]

Hello
I Have WB 135.4 (older model)
What size do I need ?
Thanks

 

[Vivid Creative Aquatics]

Hello
I Have WB 135.4 (older model)
What size do I need ?
Thanks

Almost all the older models (excluding the Cube and Peninsula Minis) have the DN15 sized stock return nozzles. This is a similar hose size to 1/2in Loc-Line, but not quite close enough to use a 1/2in RFG, so you'll need a kit that includes the adapters for 22mm modular hose hose.

We just release a new 1/2in Flex-Series RFG Flow kit that includes this adapter (plus a few others). Your tank should have two outlets, so you'll need two of these kits - one for each side:

1/2in Random Flow Generator® Flow Kit – 1/2 Flex-Series RFG | Vivid Creative Aquatics

vividcreativeaquatics.com

 

[anthonyt987]

what size do i need for a waterbox 180.5

 

[Vivid Creative Aquatics]

what size do i need for a waterbox 180.5

If it's the older Waterbox Reef 180.5, then it should have stock DN15 return nozzles which you would need the same 1/2in RFG pre-configured flow kit in the previous replay

1/2in Random Flow Generator® Flow Kit – 1/2 Flex-Series RFG | Vivid Creative Aquatics

vividcreativeaquatics.com

This kit has the 2122-050 Flex adapter, which will allow you to attach it to your stock return line.

You'll need two kits - one for each side.