Waterbox 220.6 Build thread

[Scott Schimmel]

Hey guys! I wanted to start a build thread for my new Waterbox Reef 220.6 configured as a mixed reef. It’s going to be a bit of an upgrade from my current 90 gallon. I was lucky enough to find one in stock at a local authorized dealer and they are going to deliver it late next week. My tank will be in my home office with a salt water mixing tank in the basement. The current 90 gallon has been relocated so my office can have new electrical installed, ATO and water change lines installed and a fresh coat of paint.

Below is the current build specs.

Tank (Home office)
Waterbox Reef 220.6 System

Equipment/Dry Goods
Reef Octopus Varios 8 Return Pump
Reef Octopus Regal 150INT Protein Skimmer
Klir Di-7 Drop-In Fleece Filter System
Inkbird WiFi Aquarium Heater Controller
AI Nero 5 (x2) not sure these will cut and may likely upgrade to 2x MP40's
BRS 600W Titanium Heater
Neptune Systems Apex Controller System
Neptune Systems Trident
Neptune Systems DOS System (for auto water changes)
Neptune Systems DOS System (for two part once required)
Neptune Systems LDK
Neptune Systems ATK ATO with PMUP in ATO R/O reservoir
Neptune Systems AFS
Neptune Systems FMK
Neptune Systems GRO Refugium light
Neptune Systems I/O Breakout Box to control various float switches within the ATO reservoir
Ecotech Marine Radion XR15 G5 Blue LED Light Fixtures (x3) but will likely add a another
MarcoRock Reef Saver Dry Rock (160lbs)
CaribSea Original Grade live Sand (200lbs)


Mixing Station (Basement)
Brute Can 55 gallons (x2)
BRS 4 Stage 200GPD Water Saver RO/DI System
Inkbird WiFi Aquarium Heater Controller
BRS 300W Titanium Heater
Neptune Systems EB8
Neptune systems PM2 with Temp and Salinity probes in the saltwater bin
Neptune Systems PMUP in R/O bin to fill display ATO reservoir
Neptune Systems LDK
Sicce XStream Wave Pump
Pan World 100PX Magnetic Water Pump

 

[serecheneric]

Can't wait to see the progress, I have the nero 3 in my little tank and love it, but if I didn't already have the AI lights so they could be on the same app I would've definitely went with a vortech.

 

[Scott Schimmel]

Most of the stuff I ordered arrived today. I am hoping to start the aquascape this weekend or early next week.
I also forgot I ordered the Adaptive Reef deluxe controller board until it arrived.

 

[SmCaudata]

Nero 5 is good for 13mm glass. Your tank is 19mm.

Ive faced this issue with planning my office build. I was going to do octopulse 4 (x4) with wave engine. The pumps are only 207 each without controller! Sadly, the upgraded magnet is $70 alone.

Basically I've come to the realization I will go with Ecotech or Gyres (maybe both).

 

[Scott Schimmel]

Nero 5 is good for 13mm glass. Your tank is 19mm.

Ive faced this issue with planning my office build. I was going to do octopulse 4 (x4) with wave engine. The pumps are only 207 each without controller! Sadly, the upgraded magnet is $70 alone.

Basically I've come to the realization I will go with Ecotech or Gyres (maybe both).

You do make a good point. I do have the upgraded Nero magnets which go up to 16 mm and in talking with other people they basically say that once they are running they sort of hold them selves to the glass with the 16mm magnets but that is yet to be seen.

The other idea I had was to put them on the overflow which is like 1/4” glass. I know AI doesn’t state the magnets can be submerged but I have seen several other tanks with them submerged.

 

[SmCaudata]

You do make a good point. I do have the upgraded Nero magnets which go up to 16 mm and in talking with other people they basically say that once they are running they sort of hold them selves to the glass with the 16mm magnets but that id yet to be seen.

The other idea I had was to put them on the overflow which is like 1/4” glass. I know AI doesn’t state the magnets can be submerged but I have seen several other tanks with them submerged.

That would work.

 

[REEFCRAFT]

I have a couple of Nero 5 pumps on the back of my 220.6 and they're fine

 

[Scott Schimmel]

I have a couple of Nero 5 pumps on the back of my 220.6 and they're fine

Thanks Amuze I was optimistic that they would work.

 

[Scott Schimmel]

Not much happened on the aquascape this weekend. I did build a frame the same size as the interior dimensions of the tank to help with scale when building the aquascape. Most of my attention was on the office. I also was able to get the woodwork primed and sprayed with the first coat of paint. Tank is getting delivered on Wednesday afternoon.

 

[Scott Schimmel]

Started the aquascape. My plan is to have three main structures. Here is the start of one of the structures.

 

[Scott Schimmel]

Finished the automatic water change and RO lines. Tank arrives later today!

 

[Scott Schimmel]

The tank is here! It took 4 people to get in inside but it made it safe and sound.

 

[Scott Schimmel]

Close inspection of the plumbing revealed a little too much glue was used on one of the unions. The pipes were actually glued together and took a bit of a twist on my part to get them to separate. I could probably easily remove the excess glue with a razor blade however I will email Waterbox customer service in the morning and see what they have to say.

 

[Scott Schimmel]

I spoke to Waterbox support this morning and less than 30 minutes later I had tracking information for the replacement drain assembly. I also noticed issues with two of the doors. One of them was warped and not closing properly and the other fit and finish was not great. I opened a claim and 20 minutes later I received another email from support that they were sending out two new doors. Customer Service at Waterbox is top notch!

 

[jp_75]

An i seeing Ginger guys? Congrats on tank!!

 

[Scott Schimmel]

An i seeing Ginger guys? Congrats on tank!!

Yep, they were both here. You must be local. I am in Oswego.

 

[jp_75]

I’m from Darien. I visit the store pretty often.

 

[geckoejon]

What type of comm line did you run for your dos / awc? I’m assuming you went aftermarket & not with apex?

I am looking to set mine up & wondering where I can order from.

 

[Scott Schimmel]

What type of comm line did you run for your dos / awc? I’m assuming you went aftermarket & not with apex?

I am looking to set mine up & wondering where I can order from.

Correct I didn't want to run multiple extension cables so I followed the following and everything worked great in my testing. I used these Amazon product

 

[geckoejon]

Correct I didn't want to run multiple extension cables so I followed the following and everything worked great in my testing. I used these Amazon product

Perfect! Thanks & have fun with the build. It’s looking great. Fun stuff…