- Joined
- Apr 13, 2018
- Messages
- 1,635
- Reaction score
- 4,082
- Review score
- +0 /0 /-0
- Location
- Detroit Metro
The stand I built for my 150 gallon eurobraced SCA tank has a bow in the middle causing there to be a gap between the tank and the stand on the sides, more pronounced in the front where I have a header with no vertical supports. In the back the gap is maybe a 32nd on each side. In the front my gap is about an eighth on each side. I used the included quarter inch foam pad from SCA. The tank does not have water. I have attached pics starting at front left side going to the right and around. I will attach some photos of build in next post. Thanks in advance for any help.