Rodi and booster questions

KStatefan

2500 Club Member
View Badges
Joined
Jun 24, 2015
Messages
4,560
Reaction score
4,375
Location
MHK
Rating - 0%
0   0   0
Verify everything is hooked up according to the instructions.

Can you post pictures of it?
 

KStatefan

2500 Club Member
View Badges
Joined
Jun 24, 2015
Messages
4,560
Reaction score
4,375
Location
MHK
Rating - 0%
0   0   0
It is hard for me to follow the video but it looks like the gauge in on the inlet side of the booster you would want it on the outside of the pump.
 
OP
OP
H

Hannah2024

Community Member
View Badges
Joined
Mar 21, 2024
Messages
27
Reaction score
1
Location
ohio
Rating - 0%
0   0   0
It is hard for me to follow the video but it looks like the gauge in on the inlet side of the booster you would want it on the outside of the pump.
Do you think you could circle the spot it would have to go if I sent a picture of the whole thing
 

KStatefan

2500 Club Member
View Badges
Joined
Jun 24, 2015
Messages
4,560
Reaction score
4,375
Location
MHK
Rating - 0%
0   0   0
Remove it from here

1711044059381.png




Put it here

1711043945232.png
 

KStatefan

2500 Club Member
View Badges
Joined
Jun 24, 2015
Messages
4,560
Reaction score
4,375
Location
MHK
Rating - 0%
0   0   0
Unplug the red line from the carbon filter. Unplug the yellow line from the y fitting. Plug the yellow line into the carbon filter.

Move the y fitting to to membrane inlet. Run a line from the y fitting to the gauge.
 
OP
OP
H

Hannah2024

Community Member
View Badges
Joined
Mar 21, 2024
Messages
27
Reaction score
1
Location
ohio
Rating - 0%
0   0   0
Unplug the red line from the carbon filter. Unplug the yellow line from the y fitting. Plug the yellow line into the carbon filter.

Move the y fitting to to membrane inlet. Run a line from the y fitting to the gauge.
Ok I’m not home yet but when I am I will do that
 
OP
OP
H

Hannah2024

Community Member
View Badges
Joined
Mar 21, 2024
Messages
27
Reaction score
1
Location
ohio
Rating - 0%
0   0   0
Unplug the red line from the carbon filter. Unplug the yellow line from the y fitting. Plug the yellow line into the carbon filter.

Move the y fitting to to membrane inlet. Run a line from the y fitting to the gauge.
Thanks a lot just did it now it’s at about 90 psi
 

HAVE YOU EVER KEPT A RARE/UNCOMMON FISH, CORAL, OR INVERT? SHOW IT OFF IN THE THREAD!

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top