Reef factory fleece roller: how to install in weird funky WB sump?

Kzang

Well-Known Member
View Badges
Joined
Dec 17, 2017
Messages
998
Reaction score
745
Rating - 75%
6   2   0
So I bought a reef factory M fleece roller. Yay! But, how the hell do I install it? WB has it in the sock section. However, there is a section before that where the main drain drains, for a bubble trap. If I plumb the drain into the fleece roller, it’s bypass that section where I have probes and heaters.

So what do I do? Just plumb the thing, then use the manifold with tubing to go into the first section so it has some flow for probe and heaters?

Or do I split the main drain into that compartment and other half into the reef factory?

The design of the sump is very weird, even though I have a skimmer going and 70% on the m2, I get a lot of detritus in the sump.

IMG_8673.png IMG_8674.png IMG_8675.jpeg
 

jakebarrierreef

New Member
View Badges
Joined
Feb 4, 2024
Messages
16
Reaction score
12
Location
USA
Rating - 0%
0   0   0
I would bypass that first existing section completely. With the roller plumbed, you won’t have water flow through that first section so it’s not a good place for probes or equipment. It’ll be mainly stagnant water.

Maybe if you have the emergency drain there with a decent percentage of flow, you could get away with it.
 
OP
OP
K

Kzang

Well-Known Member
View Badges
Joined
Dec 17, 2017
Messages
998
Reaction score
745
Rating - 75%
6   2   0
I would bypass that first existing section completely. With the roller plumbed, you won’t have water flow through that first section so it’s not a good place for probes or equipment. It’ll be mainly stagnant water.

Maybe if you have the emergency drain there with a decent percentage of flow, you could get away with it.
It has a manifold plumbed into the return and thought about just opening that up some to allow some flow so I can still use the compartment for my probes, ozone pump, and trident sampling. Put tubing on it and let it just flow into that spot and over into the fleece roller section. Be less Detritus build up since the flow would come from return post fleece rolled
 

Attachments

  • IMG_8682.jpeg
    IMG_8682.jpeg
    172.1 KB · Views: 49

jakebarrierreef

New Member
View Badges
Joined
Feb 4, 2024
Messages
16
Reaction score
12
Location
USA
Rating - 0%
0   0   0
Sounds reasonable to me. Crank up your return pump to make up for the diverted flow and you should be alright.
 
Back
Top