- Joined
- Dec 2, 2021
- Messages
- 4,700
- Reaction score
- 16,959
- Review score
- +1 /0 /-0
- Location
- Western Springs, IL
can you run them un-powered, just as toggle switches?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
@Projects with Sam I assume since they won't trigger the BoB because they require 12v and the Apex BoB doesn't have that. I could run they inline between a power source and a device as a plain on/off switch but my energy bars could do that as well. Just wouldn't be physical.can you run them un-powered, just as toggle switches?
@Projects with Sam see post above.Could you run inexpensive buck converters to lower the signal voltage to the BoB?
I used these in my DIY CNC to lower 24V to 12V for a fan:
@Sean Clark yes I was planning a project with a BOB once and was confused so contacted NS. They said that could fry the modules come to think of it.The BOB should not have any power provided to it at any voltage. Open and closed is all it wants. Any additional voltage applied will only create problems; possibly catastrophic problems. You can have illuminated switches controlled off of their own power supply.
@Projects with Sam I have a multimeter, don't know how to work it. The voltage it takes to go through the switches to make them work is 12V. The BOB has to connect to the same connections on the switches which have 12V. This will fry the BOB and possibly the Apex base unit.Do you have a voltmeter? You could setup the powered switches and check to make certain there is no voltage on the wires going to the BoB.
oh; k. nvm then.@Projects with Sam I have a multimeter, don't know how to work it. The voltage it takes to go through the switches to make them work is 12V. The BOB has to connect to the same connections on the switches which have 12V. This will fry the BOB and possibly the Apex base unit.
@Fudsey your pic or link didn't show up. I'm afraid to use razors for fear of nicking the silicone. I think I'll try a credit card.I use razor blades on mine all the time
This:
use that tool too. Works great! I liked it so much I made a mount for it:I use razor blades on mine all the time
This: