**** R2R Par Database ****

rmcrom

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Dec 31, 2020
Messages
357
Reaction score
310
Review score
+0 /0 /-0
Location
Texas
Rating - 0%
0   0   0
RedSea XL435 with 2x Radion XR15 g5 pro. AB+ profile at 100% schedule intensity. MQ-510 meter. (Same as above except 100% AB+ instead of 60%)
AB+_100%.jpg
 

Alex's Nano Reef

Don't tell my Landlord
Review score
+0 /0 /-0
View Badges
Joined
Dec 24, 2016
Messages
2,078
Reaction score
2,419
Review score
+0 /0 /-0
Location
North Jersey
Rating - 0%
0   0   0
I called every fish store in a 40 mile radius and found one willing to let me bring their Par meter home and back free of charge shoutout Sea Level Aquariums. Shoutout @Utubereefer for the recommendation. Lets get to it my light is a Kessil A360W mounted 8 inches above the water on a nuvo fusion 20g which is a 13" deep tank. The Meter i used was a Apogee MQ-510 Par meter. The powerhead was off the return pump stayed on. The light is not mounted dead center and since its such a shallow tank this creates a spread issues which in my case are positive because it allows for a mixed reef.Its running at 35% intesity as the peak and 48% color.
Par Map Front.jpg
 
Last edited:
AquaCave Logo Banner

gbru316

Well-Known Member
Review score
+0 /0 /-0
View Badges
Joined
May 13, 2022
Messages
841
Reaction score
1,567
Review score
+0 /0 /-0
Location
Melbourne, FL
Rating - 0%
0   0   0
In case anyone was wondering how LED hold up over the years, this was recorded a few minutes ago. Lights are around 10 years old (purchased secondhand earlier this year).


PAR Values.jpg


Tank: 40g breeder
Lights: Gen 1 Radion XR30
Mount: Ecotech RMS
Meter: Photone on iPhone 12, white/blue LED setting with diffuser (and plastic bag)
Spectrum: Natural
Measurement time: "Noon" (tank maximum)
Program intensity: 70%
Pumps/Powerheads: off
 
Last edited:
www.dinkinsaquaticgardens.com

reefiniteasy

Check me out on IG!
Review score
+0 /0 /-0
View Badges
Joined
Jun 6, 2018
Messages
2,261
Reaction score
5,218
Review score
+0 /0 /-0
Location
Orlando, FL
Rating - 0%
0   0   0
New light, Maxspect Jump Blue Edition on an IM 25 Lagoon measured with Apogee SQ-520 usb par meter. My lights are 8” off the water and the tank is only 12” deep. The 3 blue/violet channels are at 80%, green 0%, white 30%, red 20%. My rockscape is 3” off the sand on the left and rises to roughly 5.5” at its highest point in the center.

Red = sand
Yellow = rocks
Green = sand behind the rocks.

63317C2A-8319-409D-947B-F2C70B2AA780.jpeg
 

trevorhiller

Reef
Review score
+7 /0 /-0
View Badges
Joined
Oct 22, 2021
Messages
936
Reaction score
643
Review score
+7 /0 /-0
Location
Williamsport
Rating - 100%
1   0   0
XR 30 G6 over 24 in cube, the light settings are: UV 100%, Violet 100%, Blue 100%, Royal 100%, Green 20%, Red 20%, Warm White 35%, Cool White 35%. One picture is at 60% Intensity, the other at 100% Intensity. The XR30 G6 should be able to hit SPS PAR values all over in a 24" cube, sandbed to top.
 

Attachments

  • DDB1BFAC-EFCC-473A-B35E-81863C27D66E.jpeg
    DDB1BFAC-EFCC-473A-B35E-81863C27D66E.jpeg
    57.7 KB · Views: 106
  • 482A3388-2B2A-4F5D-B7F7-E38D22673D3E.jpeg
    482A3388-2B2A-4F5D-B7F7-E38D22673D3E.jpeg
    57.6 KB · Views: 147
Top Shelf Aquatics

bigdeeezyyyy

Well-Known Member
Review score
+0 /0 /-0
View Badges
Joined
May 16, 2019
Messages
599
Reaction score
435
Review score
+0 /0 /-0
Location
San Jose
Rating - 0%
0   0   0
XR 30 G6 over 24 in cube, the light settings are: UV 100%, Violet 100%, Blue 100%, Royal 100%, Green 20%, Red 20%, Warm White 35%, Cool White 35%. One picture is at 60% Intensity, the other at 100% Intensity. The XR30 G6 should be able to hit SPS PAR values all over in a 24" cube, sandbed to top.
how high is the light from the top of the water level?
 

ssdawood

Valuable Member
Review score
+3 /0 /-0
View Badges
Joined
Jul 26, 2013
Messages
1,691
Reaction score
700
Review score
+3 /0 /-0
Location
United States
Rating - 100%
2   0   0
Tank: Innovative Marine SR-80 Pro 2 (48x18x16” display section).
Lighting: 3 Kessil A360we mounted 8-9in off the water surface.
Settings: 75% Intensity and 60% Color.
Meter: Apogee MQ-510
All pumps turned off for readings. Please excuse the poor quality picture.






View attachment 2531000
I don't know why people say Kessils don't have enough par for sps.
This tank is 16deep and lights 8 to 9in of water so total 25inches.
300 in center should be enough.

One question for OP. Is you kessil more towards the front of tank. Not centered ?
 
www.dinkinsaquaticgardens.com

InvaderJim

Well-Known Member
Review score
+0 /0 /-0
View Badges
Joined
Jan 26, 2007
Messages
795
Reaction score
899
Review score
+0 /0 /-0
Location
High Springs, FL
Rating - 0%
0   0   0
  • Tank size: 48"x24"x16"
  • Type of meter you are using for measurements: Apogee Mq-510
  • Type of lighting: ATI Sunpower 6bulb
  • Height of lighting over your water: 10"
  • Depth of water: 16" depth to bottom of tank from tank rim
  • Pumps or power heads running? 2 MP40s on lagoon mode on anti-sync plus return pump
par_test.jpg
 

epidemos82

New Member
Review score
+0 /0 /-0
View Badges
Joined
Oct 3, 2022
Messages
19
Reaction score
63
Review score
+0 /0 /-0
Location
Orlando
Rating - 0%
0   0   0
Tank: WaterBox Marine 60.2 (older model) : 17 5/8" x 23 5'8" x 23 5'8"
Lights: Ecotech Radion XR15 Pro G5 with Diffuser
Mount: Ecotech RMS
Meter: Apogee MQ-510 Full Spectrum Underwater LED PAR Meter
Spectrum: AB+
Measurement time: 2pm (tank maximum) - low ambient light
Program intensity: 60%, 80%, 90%, 95%, 100%
Pumps/Powerheads: EcoTech MP10

IMG_8981.JPG IMG_8985.JPG IMG_8987.JPG IMG_8989.JPG
 

chadloomis

New Member
Review score
+0 /0 /-0
View Badges
Joined
Nov 30, 2020
Messages
13
Reaction score
1
Review score
+0 /0 /-0
Location
united states
Rating - 0%
0   0   0
I know this is an old thread but I’m looking for some guidance on this setup. Which would you use for a mixed reef primarily euphyllia. Tank is a standard 120 with 4 AI Hydra 32HD’s. Each photo has the levels the lights are tuned at and both tests were done on a running tank.
B588E144-C543-4D72-858B-2EF3DE10D66F.png
2906837A-F1F0-4A73-94E3-6F30FDF7B52A.png
 
AquaCave Logo Banner

Wiskey

Well-Known Member
Review score
+0 /0 /-0
View Badges
Joined
Sep 7, 2017
Messages
714
Reaction score
868
Review score
+0 /0 /-0
Rating - 0%
0   0   0
I know this is an old thread but I’m looking for some guidance on this setup. Which would you use for a mixed reef primarily euphyllia. Tank is a standard 120 with 4 AI Hydra 32HD’s. Each photo has the levels the lights are tuned at and both tests were done on a running tank. View attachment 2958220View attachment 2958221
It’s a great light setup, but I would say that it lands a little on the high side for Euphelia. They may adapt to it, but I don’t think it’s their ideal condition. I tend to keep them on the medium side light wise, 150-250 PAR, 300-400 is really more acropora numbers. IMHO

Whiskey
 

docforestal

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 19, 2023
Messages
279
Reaction score
426
Review score
+0 /0 /-0
Location
Vermont
Rating - 0%
0   0   0
not sure if this is useful but for those with less money ( i do plan on spending money for corals when it is time)
Tank: standard 55 gallon - 48x14 (w) x18" deep 3 inches sand
Lights: aquatic Life HM Marine coral reef wireless led light 48 inch strip (has wifi controls)
had all colors running max
Meter: photone app
par: under light 2" ~280 (225 in plastic water proof bag)
just under water 75 at bottom of my tank ~15 inches 45 par front to back
all colors at 60% 2" uner light 220 (in bag 200), just under water 45, at 14-15 inches depth 40
not bad for a cheap light, but also not very good for corals
 
Top Shelf Aquatics

Fasthandsslowmind

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Dec 19, 2021
Messages
135
Reaction score
86
Review score
+0 /0 /-0
Location
Los Lunas, NM
Rating - 0%
0   0   0
  • Tank size: 1800x800x600 (228 gal)
  • Type of meter you are using for measurements: Apogee Quantum Flux
  • Type of lighting: 3x AI Blade Coral Grow 57”1x AI Blade Coral Glow 57”
  • Height of lighting over your water: 6.5"
  • Depth of water: 770mm
  • Pumps or power heads running? Yes, a lot of surface movement 1 MP60 + 2 Reefwave 45


First time using borrowed PAR meter. Red numbers are at 100%, Yellow at 50%.

7BC9D8F0-B3E2-4710-8188-A4EE8AB7C21A.jpeg
8E01FEC4-7C2B-403A-8B8C-B8EE6B0D3A05.jpeg
 
Last edited:

Polyp polynomial: How many heads do you start with when buying zoas?

  • One head is enough to get started.

    Votes: 27 10.6%
  • 2 to 4 heads.

    Votes: 145 57.1%
  • 5 heads or more.

    Votes: 65 25.6%
  • Full colony.

    Votes: 10 3.9%
  • Other.

    Votes: 7 2.8%

New Posts

Coral-vault.com
Back
Top