PLEASE HELP! kessil Ap9x is driving me crazy!

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
I just finished installing my kessil Ap9x, everything went smooth until I tried to use my phone. The kessil WiFi app connects to my phone instead of my actual router, if I connect my phone back to my WiFi the kessil WiFi app will disconnect!! Is this normal? Does it always need to be connected to my phone? Will the light operate with the schedule I programmed if it’s not connected to WiFi? I’m frustrated as I can’t seem to figure this out.
 

InactiveAcct

Well-Known Member
View Badges
Joined
Dec 2, 2019
Messages
520
Reaction score
539
Rating - 0%
0   0   0
In AP mode you can only connect point-to-point with the fixture. The light will save your settings and is not controlled over a cloud. It does not need internet to function and you should likewise not need to be on your home wifi to program the light.

A common issue is your smart phone getting irritated when it connects to your Kessil - it is seeking active internet but does not detect a network. It may be hopping off of the Kessil to your regular home wifi automatically. In your phone’s WiFi settings turn off “auto connect” to your home network to prevent your phone from hopping from the light when you are trying to connect to it. When you are done programming the light, turn that back on.
 
OP
OP
zoanthony

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
In AP mode you can only connect point-to-point with the fixture. The light will save your settings and is not controlled over a cloud. It does not need internet to function and you should likewise not need to be on your home wifi to program the light.

A common issue is your smart phone getting irritated when it connects to your Kessil - it is seeking active internet but does not detect a network. It may be hopping off of the Kessil to your regular home wifi automatically. In your phone’s WiFi settings turn off “auto connect” to your home network to prevent your phone from hopping from the light when you are trying to connect to it. When you are done programming the light, turn that back on.
Thank you so much for clarifying that! I love this forum! I was concerned that the light was not gonna save my schedule, assuming that it had to be connected to WiFi in order for it to run my schedule. Thank you
 

JNalley

Valuable Member
View Badges
Joined
Oct 12, 2021
Messages
2,043
Reaction score
2,523
Location
Grandview
Rating - 0%
0   0   0
Just to add to what DanTheReefer said, AP mode is one way to do it. You can also have it run in the cloud where the light is connected to your wifi network at all times, and you just connect through the network. This feature might be preferable if you ever leave for an extended period and someone watching your tank calls you with algae issues or with coral issues (because you can remotely dim the lights without telling them how to do it). Just food for thought.
 
OP
OP
zoanthony

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
Just to add to what DanTheReefer said, AP mode is one way to do it. You can also have it run in the cloud where the light is connected to your wifi network at all times, and you just connect through the network. This feature might be preferable if you ever leave for an extended period and someone watching your tank calls you with algae issues or with coral issues (because you can remotely dim the lights without telling them how to do it). Just food for thought.
How do I do that?
 

JNalley

Valuable Member
View Badges
Joined
Oct 12, 2021
Messages
2,043
Reaction score
2,523
Location
Grandview
Rating - 0%
0   0   0
How do I do that?
During the initial setup in the App, you're prompted for different connection types. You need to choose the one that says Through Wireless Router, not the one that says Connect Directly Via WiFi.

You can find the App Manual here: https://www.kessil.com/downloads/accessories/kessilwifi_UserManual/wifi_user_manual.html

It shows you all of the different options. What you're wanting to pay attention to as far as lights are concerned is the Wi-Fi_STA_Mode side.
 
OP
OP
zoanthony

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
During the initial setup in the App, you're prompted for different connection types. You need to choose the one that says Through Wireless Router, not the one that says Connect Directly Via WiFi.

You can find the App Manual here: https://www.kessil.com/downloads/accessories/kessilwifi_UserManual/wifi_user_manual.html

It shows you all of the different options. What you're wanting to pay attention to as far as lights are concerned is the Wi-Fi_STA_Mode

During the initial setup in the App, you're prompted for different connection types. You need to choose the one that says Through Wireless Router, not the one that says Connect Directly Via WiFi.

You can find the App Manual here: https://www.kessil.com/downloads/accessories/kessilwifi_UserManual/wifi_user_manual.html

It shows you all of the different options. What you're wanting to pay attention to as far as lights are concerned is the Wi-Fi_STA_Mode side.

During the initial setup in the App, you're prompted for different connection types. You need to choose the one that says Through Wireless Router, not the one that says Connect Directly Via WiFi.

You can find the App Manual here: https://www.kessil.com/downloads/accessories/kessilwifi_UserManual/wifi_user_manual.html

It shows you all of the different options. What you're wanting to pay attention to as far as lights are concerned is the Wi-Fi_STA_Mode side.
Appreciate the information, I’m gonna try that right now. Thank you
 

Doompastew

Community Member
View Badges
Joined
Feb 11, 2024
Messages
42
Reaction score
56
Location
Watsontown
Rating - 0%
0   0   0
Just to add to what DanTheReefer said, AP mode is one way to do it. You can also have it run in the cloud where the light is connected to your wifi network at all times, and you just connect through the network. This feature might be preferable if you ever leave for an extended period and someone watching your tank calls you with algae issues or with coral issues (because you can remotely dim the lights without telling them how to do it). Just food for thought.
Jumping in for a question here... I was having the same issues. I turned off the auto connect on my phone, factory reset the light. During the setup, I chose the router option, entered my network and password. The app instructed me to connect to a different network and gave the name of it. I searched for the network, and it never showed up. The light does follow the schedule; however, I cannot connect to it when I am away from home.
Any words of wisdom??
 

JNalley

Valuable Member
View Badges
Joined
Oct 12, 2021
Messages
2,043
Reaction score
2,523
Location
Grandview
Rating - 0%
0   0   0
Jumping in for a question here... I was having the same issues. I turned off the auto connect on my phone, factory reset the light. During the setup, I chose the router option, entered my network and password. The app instructed me to connect to a different network and gave the name of it. I searched for the network, and it never showed up. The light does follow the schedule; however, I cannot connect to it when I am away from home.
Any words of wisdom??
So, it sounds like it wasn't able to directly connect to the light to upload the Username and Password information the light could connect to your network. This is a similar situation to above. Instead of connecting to the light through your WiFi network, you're directly connecting. You should try to reset the light and re-connect following the instructions I gave above.
 

Outlaw Corals

Well-Known Member
View Badges
Joined
May 1, 2023
Messages
852
Reaction score
722
Location
Colonia
Rating - 0%
0   0   0
I just got a AP9X and hooked it up yesterday, so far i hate the app, the my AI app was so much easier but these lights are way better then the Hydra’s i had
 

jttide

Community Member
View Badges
Joined
Jan 8, 2024
Messages
42
Reaction score
66
Location
Alabama
Rating - 0%
0   0   0
I am having a small issue. At midnight each night, my light turns on for 30 seconds. Then back off. I cannot figure out how to stop this with scheduling. I set it to turn off at 8:00pm, then back on at 6:00am. But it always briefly turns back on at midnight.
 
OP
OP
zoanthony

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
I am having a small issue. At midnight each night, my light turns on for 30 seconds. Then back off. I cannot figure out how to stop this with scheduling. I set it to turn off at 8:00pm, then back on at 6:00am. But it always briefly turns back on at midnight.
Are your moonlight settings on?
 
OP
OP
zoanthony

zoanthony

New Member
View Badges
Joined
Mar 6, 2024
Messages
23
Reaction score
14
Location
los angeles
Rating - 0%
0   0   0
I believe so, but will check that as soon as I get home from work.
If your intentions are to run a moon light schedule i would adjust the timing, if you’re not trying to run any moonlight simply turn off the moonlight option.
 

jttide

Community Member
View Badges
Joined
Jan 8, 2024
Messages
42
Reaction score
66
Location
Alabama
Rating - 0%
0   0   0
If your intentions are to run a moon light schedule i would adjust the timing, if you’re not trying to run any moonlight simply turn off the moonlight option.
No intentions of running moonlight. Hopefully that’s the issue. I will reply back after I check. This thread was helpful in getting mine set up with WiFi. Hope my issue can help someone, even if it’s just an oversight on my end.
 

jttide

Community Member
View Badges
Joined
Jan 8, 2024
Messages
42
Reaction score
66
Location
Alabama
Rating - 0%
0   0   0
No intentions of running moonlight. Hopefully that’s the issue. I will reply back after I check. This thread was helpful in getting mine set up with WiFi. Hope my issue can help someone, even if it’s just an oversight on my end.
Moonlight is off. I honestly don’t know what is going on. It runs like a quick cycle of my setting, then off. Takes about 30 seconds like I mentioned, and always at midnight.
 

jttide

Community Member
View Badges
Joined
Jan 8, 2024
Messages
42
Reaction score
66
Location
Alabama
Rating - 0%
0   0   0
Can you show me your schedule, I need to see all of the points
I have to be doing something that’s simple to fix, with others not having this issue.
 

Attachments

  • IMG_8017.png
    IMG_8017.png
    124.7 KB · Views: 36
  • IMG_8014.png
    IMG_8014.png
    139.8 KB · Views: 32
  • IMG_8015.png
    IMG_8015.png
    144.1 KB · Views: 34
  • IMG_8016.png
    IMG_8016.png
    139.4 KB · Views: 46
Back
Top